| View previous topic :: View next topic |
| Author |
Message |
piroko
Tux's lil' helper
Joined: 25 Aug 2006
Posts: 77
|
 Posted: Mon Jun 25, 2007 10:07 pm Post subject: Mac On Linux Issue [SOLVED] |
 |
|
So all of a sudden it seems mac on linux doesn't want to work anymore. I have it set to run on a separate console, and the grey window with the spinny-thingy at the bottom comes up, but then the video just disappears and I'm left with a blank, regular console. Mac on linux seems to still be running though, with this to say:
| Code: | .:[ jeremy@ambelina ~ ]:. startmol -X
Mac-on-Linux 0.9.72 [Jun 18 2007 20:58]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Loading Mac-on-Linux kernel module:
/usr/lib/mol/0.9.72/modules/2.6.21.1/mol.ko
mknod: `/dev/mol': File exists
Creating the /dev/net/tun device node.
Loading tun driver kernel module:
/usr/lib/mol/0.9.72/modules/2.6.21.1/tun.ko
Running in PowerPC 7400 mode, 96 MB RAM
Timebase: 08.32 MHz, Bus: 33.28 MHz, Clock: 1666 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Video driver(s): [console_video]
1440* 960, depth 8,15,32 { 0.0 } Hz
No video mode match the default one.
Autoswitching to console
DHCP nameserver exported: 64.19.9.18
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
ip/mask: 192.168.41.2/255.255.255.0 gw: 192.168.41.1
broadcast: 192.168.41.255 nameserver: 192.168.41.1
ALSA sound driver (device 'default')
CD /dev/cdrom CD/DVD <read-only> ------
----> /dev/hda2 might be a boot-strap partition.
Unembedded HFS+ /dev/hda3 <rw> 74871 MB
----> (disk_open) Device /dev/hda7 is zero length, refusing to use it.: Bad file descriptor
----> (disk_open) Device /dev/hda8 is zero length, refusing to use it.: Bad file descriptor
----> (disk_open) Device /dev/hda9 is zero length, refusing to use it.: Bad file descriptor
(etc etc)...
SCSI devices:
SCSI /dev/cdrom [CDROM/DVD driver]
>> ==================================================
>> MacOS X Boot Loader 0.9.72
>> Candidate boot volume: /mol-blk@0/disk@0:0
>> /mol-blk@0/disk@0:0,\mach_kernel (4347724 bytes)
>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
>> ==================================================
<*> IRQ vectorCanBeShared 3
<*> IRQ vectorCanBeShared 2
<*> Block Driver v1.1
<*> SCSI driver v1.03
<*> IRQ vectorCanBeShared 6
<*> IRQ vectorCanBeShared 4
<*> IRQ vectorCanBeShared 24
<*> IRQ vectorCanBeShared 5
<*> Ethernet driver 1.1
<*> MolAudio 1.2
<*> IRQ vectorCanBeShared 1
+ Video Driver v1.12
Rowbytes has changed (was 2944, now 2880)!
Rowbytes has changed (was 2944, now 2880)!
Autoswitching to console
<*> MolEnet: Link up at 100 Mbps - Full Duplex
DHCP lease: 192.168.41.2
Rowbytes has changed (was 2944, now 2880)!
Video transition failed
Signal INT
One more to kill emulator
cleaning up...
ablk: bad unitABlk engine error
Terminating threads...
DONE
.:[ jeremy@ambelina ~ ]:. |
Is there an obvious solution to this?
Thank you!
_________________
Anyone who is not confused by quantum theory does not truly understand it.
Last edited by piroko on Tue Jun 26, 2007 11:17 pm; edited 1 time in total |
|
| Back to top |
|
 |
JoseJX
Retired Dev
Joined: 28 Apr 2002
Posts: 2774
|
|
| Back to top |
|
|
piroko
Tux's lil' helper
Joined: 25 Aug 2006
Posts: 77
|
| Posted: Tue Jun 26, 2007 6:00 pm Post subject: |
|
|
Ok, so I changed blkdev to read and now I get just a blank console with mol saying this:
| Code: | .:[ jeremy@ambelina ~ ]:. startmol -X
Mac-on-Linux 0.9.72 [Jun 26 2007 00:17]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Running in PowerPC 7400 mode, 96 MB RAM
Timebase: 08.32 MHz, Bus: 33.28 MHz, Clock: 1666 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Video driver(s): [console_video]
1440* 960, depth 8,15,32 { 0.0 } Hz
Autoswitching to console
DHCP nameserver exported: 192.168.0.1
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
ip/mask: 192.168.41.2/255.255.255.0 gw: 192.168.41.1
broadcast: 192.168.41.255 nameserver: 192.168.41.1
ALSA sound driver (device 'default')
Unembedded HFS+ /dev/hda3 <read-only> 74871 MB BOOT
SCSI devices:
<No SCSI Devices>
>> ==================================================
>> MacOS X Boot Loader 0.9.72
>> Candidate boot volume: /mol-blk@0/disk@0:0
>> /mol-blk@0/disk@0:0,\mach_kernel (4347724 bytes)
Rowbytes has changed (was 5888, now 5760)!
Video transition failed
>> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
>> ==================================================
<*> IRQ vectorCanBeShared 3
<*> IRQ vectorCanBeShared 4
<*> IRQ vectorCanBeShared 2
<*> Block Driver v1.1
<*> IRQ vectorCanBeShared 24
Rowbytes has changed (was 5888, now 5760)!
Video transition failed
Signal INT
One more to kill emulator
cleaning up...
Terminating threads...
DONE
.:[ jeremy@ambelina ~ ]:. |
I must really be doing something wrong here...
_________________
Anyone who is not confused by quantum theory does not truly understand it. |
|
| Back to top |
|
|
JoseJX
Retired Dev
Joined: 28 Apr 2002
Posts: 2774
|
| Posted: Tue Jun 26, 2007 7:27 pm Post subject: |
|
|
Nope, sorry I missed it before but there's a subtle bug that occurs only when X is running and you create the fb_modes file. Edit /var/lib/mol/fb_modes (I know it says not to edit by hand...) and change the 5888 to 5760. It should work after that.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml |
|
| Back to top |
|
|
piroko
Tux's lil' helper
Joined: 25 Aug 2006
Posts: 77
|
| Posted: Tue Jun 26, 2007 11:16 pm Post subject: |
|
|
Thanks again JoseJX. That did it 
_________________
Anyone who is not confused by quantum theory does not truly understand it. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on PPC
