| View previous topic :: View next topic |
| Author |
Message |
the_enigma
Apprentice
Joined: 23 Aug 2004
Posts: 210
Location: Brisbane, Aus
|
 Posted: Tue Jun 26, 2007 10:54 pm Post subject: Radeon 9600 - fglrx - signal 11 |
 |
|
I'm running an R9600 Pro on my HTPC. It runs on 2.6.19-gentoo-r5 on an Nforce2 based motherboard. I have agp and nvidia_agp compiled as modules and loaded. However, when I try to start X with the fglrx, it catches a signal 11 and crashes out. The setup works fine with the open-source radeon drivers however. Xorg-server is compiled with VIDEO_CARDS_RADEON and VIDEO_CARDS_FGLRX
The last part of the log file is
| Code: | (II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 398/297MHz @ 50Hz [enable load balancing]
Backtrace:
0: X(xf86SigHandler+0x85) [0x80c9325]
1: /usr/lib/xorg/modules/drivers//fglrx_drv.so [0x404bcc81]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(DALCWDDE+0x1a2) [0x404bb252]
3: /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperAddCustomizeMode+0x1a4) [0x404554e4]
4: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit+0xd0a) [0x4042ddca]
5: X(InitOutput+0xbd3) [0x80a6393]
Fatal server error:
Caught signal 11. Server aborting
|
Full xorg.conf - http://www.strudel-hound.com/fglrx/xorg.conf
From the conf file, you can see the two devices I have setup. I just switch between ATI and radeon to test the two drivers.
Full Xorg.0.log from crash - http://www.strudel-hound.com/fglrx/Xorg.0.log.old
Full Xorg.0.log from working opensource driver - http://www.strudel-hound.com/fglrx/Xorg.0.log
If anyone other info is requested, I can post it. Anyone have any ideas on what I should test next to try to solve this? |
|
| Back to top |
|
 |
poly_poly-man
Advocate
Joined: 06 Dec 2006
Posts: 2477
Location: RIT, NY, US
|
| Posted: Wed Jun 27, 2007 1:30 am Post subject: |
|
|
Use the open source drivers. AFAIK, the 9600 is no longer officially supported by the binary drivers. It is however fully supported by the OSS drivers.
hih,
poly-p man
_________________
iVBORw0KGgoAAAANSUhEUgAAA
avatar: new version of logo - see topic 838248. Potentially still a WiP. |
|
| Back to top |
|
|
the_enigma
Apprentice
Joined: 23 Aug 2004
Posts: 210
Location: Brisbane, Aus
|
| Posted: Wed Jun 27, 2007 9:29 am Post subject: |
|
|
Bugger. Because the radeon driver seems to use quite a decent amount of CPU while scrolling through the menu in MythTV. Ah well  |
|
| Back to top |
|
|
|
Kernel & Hardware
