| View previous topic :: View next topic |
| Author |
Message |
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
 Posted: Tue Jun 26, 2007 1:40 pm Post subject: Запутался с use флагами.Помогите. |
 |
|
План моих действий:
Поставил Gentoo с минимал CD 2007.0,
обновился,
собрал xorg-x11,
собрал gnome но уже с флагом "-qt -kde gnome samba" - флаг samba отработал сеть заработала это мне и надо было
НО после начал ставить драйвера на звук по хэнд буку как модулем в ядре т.к собирал ядро НЕ через genkernel и тут проблемы все как по хэнд буку а вот все программы и gnome не хотят воспроизводить звук.
полез смотреть а что у меня за флаги стоят по default в /etc/make.profile там ни alsa ни остальной мультимедиа
Вопрос как пересобрать так чтобы все мои флаги в make.conf отработали?А то я не могу jpeg даже посмотреть.
Пробовал пересобирать так:
1) вписал флаги в make.conf -> пересобрал всю систему по хэнд буку с учетом новых USE ноль реакции
2) пробовал просто хотябы USE="alsa" emerge gnome тоже самое
подскажите как правильно пересобирать или я что то не то делаю.
Заранее спасибо. |
|
| Back to top |
|
 |
ZByte
Tux's lil' helper
Joined: 18 Aug 2004
Posts: 141
Location: Moscow, Russia
|
| Posted: Tue Jun 26, 2007 2:17 pm Post subject: |
|
|
Попробуй вот так:
| Code: | | emerge -DuNpv world |
Хотя не думаю, что тебе это со звуком поможет, тут скорее всего проблема в другом. Нужны логи. |
|
| Back to top |
|
|
d_n_k
Tux's lil' helper
Joined: 15 Jul 2004
Posts: 138
Location: Russia
|
| Posted: Tue Jun 26, 2007 2:24 pm Post subject: |
|
|
| man emerge на предмет --new-use |
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Wed Jun 27, 2007 8:41 am Post subject: |
|
|
| Пока gnome все так и говорит что не может найти дополнительную библиотеку.Пробую начать все с начала с настройки ядра но думаю не в этом все дело просто не пересобирается правильно сам gnome |
|
| Back to top |
|
|
ZByte
Tux's lil' helper
Joined: 18 Aug 2004
Posts: 141
Location: Moscow, Russia
|
| Posted: Wed Jun 27, 2007 8:46 am Post subject: |
|
|
| Mintta wrote: | | Пока gnome все так и говорит что не может найти дополнительную библиотеку.Пробую начать все с начала с настройки ядра но думаю не в этом все дело просто не пересобирается правильно сам gnome |
Ты бы показал какую ошибку тебе Гном выдаёт, а не описывал её своими словами.
А вобще если нарушены зависимости, то это лечится через:
|
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Wed Jun 27, 2007 9:00 am Post subject: |
|
|
| Говорите какие логи нужны я дам просто второй день уже сижу над этим. |
|
| Back to top |
|
|
ZByte
Tux's lil' helper
Joined: 18 Aug 2004
Posts: 141
Location: Moscow, Russia
|
| Posted: Wed Jun 27, 2007 10:50 am Post subject: |
|
|
| Mintta wrote: | | Говорите какие логи нужны я дам просто второй день уже сижу над этим. |
Ну как минимум часть dmesg, которая звука касается. Плюс lspci, lsmod и логи гнома, только вот не помню куда он их пишет..... |
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Wed Jun 27, 2007 11:24 am Post subject: |
|
|
Это мой dmesg: | Code: |
Gentoo2007 ~ # dmesg
Linux version 2.6.20-gentoo-r8 (root@Gentoo2007) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #3 SMP Tue Jun 26 15:51:37 MSD 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 0000000011eeb000 end: 0000000011feb000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 0000000011feb000 size: 0000000000004000 end: 0000000011fef000 type: 3
copy_e820_map() start: 0000000011fef000 size: 0000000000010000 end: 0000000011fff000 type: 2
copy_e820_map() start: 0000000011fff000 size: 0000000000001000 end: 0000000012000000 type: 4
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000011feb000 (usable)
BIOS-e820: 0000000011feb000 - 0000000011fef000 (ACPI data)
BIOS-e820: 0000000011fef000 - 0000000011fff000 (reserved)
BIOS-e820: 0000000011fff000 - 0000000012000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
287MB LOWMEM available.
Entering add_active_range(0, 0, 73707) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 73707
HighMem 73707 -> 73707
early_node_map[1] active PFN ranges
0: 0 -> 73707
On node 0 totalpages: 73707
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 543 pages used for memmap
Normal zone: 69068 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 ASUS ) @ 0x000f7b40
ACPI: RSDT (v001 ASUS TUSL2-C 0x30303031 MSFT 0x31313031) @ 0x11feb000
ACPI: FADT (v001 ASUS TUSL2-C 0x30303031 MSFT 0x31313031) @ 0x11feb100
ACPI: BOOT (v001 ASUS TUSL2-C 0x30303031 MSFT 0x31313031) @ 0x11feb040
ACPI: DSDT (v001 ASUS TUSL2-C 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 20000000 (gap: 12000000:ecc00000)
Detected 1206.101 MHz processor.
Built 1 zonelists. Total pages: 73132
Kernel command line: root=/dev/hda3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0124a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 285724k/294828k available (3266k kernel code, 8608k reserved, 1641k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd2800000 - 0xff7fe000 ( 719 MB)
lowmem : 0xc0000000 - 0xd1feb000 ( 287 MB)
.init : 0xc05d3000 - 0xc0616000 ( 268 kB)
.data : 0xc04309ef - 0xc05cb130 (1641 kB)
.text : 0xc0100000 - 0xc04309ef (3266 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2413.74 BogoMIPS (lpj=4827493)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 442 Objects with 45 Devices 154 Methods 17 Regions
ACPI Namespace successfully loaded at root c0678db0
ACPI: setting ELCR to 0200 (from 0e00)
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) III CPU 1200MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:........................................................
Initialized 16/17 Regions 0/0 Fields 25/25 Buffers 15/17 Packages (451 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 48 objects)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:03: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:03: ioport range 0xec00-0xec3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: de800000-dfefffff
PREFETCH window: e0000000-f7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: de000000-de7fffff
PREFETCH window: dff00000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Invalid PBLK length [5]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:0d.0: 3Com PCI 3c905C Tornado at d2804000.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: FUJITSU MPD3108AT, ATA DISK drive
hdb: MAXTOR 6L020J1, ATA DISK drive
hda: hw_config=0000
hda: hw_config=0000
hdb: hw_config=6b00
hdb: hw_config=6b00
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: ASUS CD-S520B2, ATAPI CD/DVD-ROM drive
hdd: hw_config=0000
hdd: hw_config=0000
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 21095424 sectors (10800 MB) w/512KiB Cache, CHS=20928/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 40132503 sectors (20547 MB) w/1819KiB Cache, CHS=39813/16/63<6>hdb: hw_config=6b00
, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdd: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000a400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000a000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 268k freed
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
radeonfb_pci_register BEGIN
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb (0000:01:00.0): Found 131072k of DDR 256 bits wide videoram
radeonfb (0000:01:00.0): mapped 16384k videoram
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=378.00 Mhz, System=338.00 MHz
radeonfb: PLL min 20000 max 40000
1 chips in connector info
- chip 1 has 2 connectors
* connector 0 of type 2 (CRT) : 2300
* connector 1 of type 3 (DVI-I) : 3201
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: I2C (port 4) ... not found
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb (0000:01:00.0): ATI Radeon NH
radeonfb_pci_register END
EXT3 FS on hda3, internal journal
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k
eth0: setting full-duplex.
eth0: no IPv6 routers present
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
|
Это мой lspci:
| Code: |
Gentoo2007 ~ # lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 05)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
02:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
02:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
|
Это мой lsmod:
| Code: |
Gentoo2007 ~ # lsmod
Module Size Used by
snd_seq_midi 9888 0
snd_emu10k1_synth 9856 0
snd_emux_synth 29696 1 snd_emu10k1_synth
snd_seq_virmidi 9088 1 snd_emux_synth
snd_seq_midi_event 9728 2 snd_seq_midi,snd_seq_virmidi
snd_seq_midi_emul 9088 1 snd_emux_synth
snd_seq 44080 5 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul
snd_emu10k1 104640 4 snd_emu10k1_synth
snd_rawmidi 19456 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_ac97_codec 88096 1 snd_emu10k1
snd_pcm 63620 2 snd_emu10k1,snd_ac97_codec
snd_seq_device 9352 4 snd_seq_midi,snd_emu10k1_synth,snd_emu10k1,snd_rawmidi
snd_timer 19972 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 11144 2 snd_emu10k1,snd_pcm
snd_util_mem 7424 2 snd_emux_synth,snd_emu10k1
snd_hwdep 9860 2 snd_emux_synth,snd_emu10k1
snd 37624 16 snd_emux_synth,snd_seq_virmidi,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
radeonfb 95936 0
fb_ddc 6016 1 radeonfb
i2c_algo_bit 10504 1 radeonfb
cfbcopyarea 7424 1 radeonfb
i2c_core 19840 3 radeonfb,fb_ddc,i2c_algo_bit
cfbimgblt 6784 1 radeonfb
cfbfillrect 7296 1 radeonfb
ac97_bus 6144 1 snd_ac97_codec
soundcore 9568 1 snd
|
|
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Wed Jun 27, 2007 11:32 am Post subject: |
|
|
Еще когда попробовал проиграть звуковой файл плеером он у меня audacious он проиграл и все впорядке смтрел настройки там все по default и звуковую он мою юзает а вот как объяснить gnome где моя звук. карта я не могу понять. Это ->> "Модули GStreamer и/или устройства регулировки громкости не найдены." мне говорит регулятор громкости после того как я сделал alsaconf.
Может в "Выбор мультимедийной системы" надо что то указать в разделе "Модуль вывода по умолчанию" -> "Вывод" -> "Канал" я не пойму какой параметр там надо прописать если в "Вывод" выбрать "другой" |
|
| Back to top |
|
|
d_n_k
Tux's lil' helper
Joined: 15 Jul 2004
Posts: 138
Location: Russia
|
| Posted: Wed Jun 27, 2007 1:25 pm Post subject: |
|
|
рКтпы АНтп
USE="alsa" emerge world --new-use -pv |
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Wed Jun 27, 2007 9:02 pm Post subject: |
|
|
| Попробую.Отпишу как там и во что это все вылилось.Спасибо за участие еще раз. |
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Fri Jun 29, 2007 6:11 am Post subject: |
|
|
Вот что получилось:
после запуска | Code: | | USE="alsa" emerge world --newuse |
все осталось так как и было одно радует что звук не работает только в gnome.Драйвера встали нормально.Буду удалять gnome и ставить заново так как пересборка не помогает. |
|
| Back to top |
|
|
Mintta
n00b
Joined: 14 Jun 2006
Posts: 21
Location: Sankt-Peterburg,Russia
|
| Posted: Mon Jul 02, 2007 9:55 am Post subject: |
|
|
Пришел закрыть тему.
В общем прописал нужные мне USE флаги в /etc/make.conf
удалил GNOME (хотя я думаю и не недо было удалять просто я сделал это до того как начал читать Документацию про portage ) и запустил по очереди три команды
| Code: |
# emerge --update --deep --newuse world
# emerge --depclean
# revdep-rebuild
|
вот и все как я и думал просто пакеты не были собраны с флагом alsa
после этого звук заработал JPEG начал читаться.
Всем спасибо. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Russian
