| View previous topic :: View next topic |
| Author |
Message |
michaelkuijn
n00b
Joined: 28 Sep 2003
Posts: 72
Location: The Netherlands
|
 Posted: Thu Jun 21, 2007 10:30 am Post subject: ATA errors and freezes |
 |
|
For a couple of weeks this problem has been hitting my system randomly, causing freezing. I have no idea why this is happening, or if this is a hardware or a software problem... Please help
| Code: | ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 25/00:08:5f:05:14/00:00:16:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:01:01:4f:c2/00:00:00:00:00/10 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: port failed to respond (30 secs, Status 0xd0)
ata2: soft resetting port
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: port failed to respond (30 secs, Status 0xd0)
ata2: soft resetting port
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: port failed to respond (30 secs, Status 0xd0)
ata2: soft resetting port
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: disabled
ata2: failed to recover some devices, retrying in 5 secs
ATA: abnormal status 0xD0 on port 0xF807
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x40)
ata2.01: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: soft resetting port
ATA: abnormal status 0xD0 on port 0xF807
ATA: abnormal status 0xD0 on port 0xF807
ata2.01: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370199735
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196531 0x0 SD]
REISERFS: abort (device dm-1): Journal write error in flush_commit_list
REISERFS: Aborting journal for filesystem on dm-1
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 24560 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
ReiserFS: dm-1: warning: clm-6006: writing inode 41501 on readonly FS
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196531 0x0 SD]
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
Buffer I/O error on device dm-1, logical block 2687148
lost page write due to I/O error on dm-1
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
Buffer I/O error on device dm-1, logical block 2949129
lost page write due to I/O error on dm-1
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370148223
Buffer I/O error on device dm-1, logical block 3014712
lost page write due to I/O error on dm-1
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370199127
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370199751
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196531 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3465736 3465748 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3465736 3465748 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3465736 3465748 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464618 3464654 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464618 3464654 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464618 3464654 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370410847
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1543782 3196532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 368838775
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1382 1392 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 368838775
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1382 1392 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 368838775
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [1382 1392 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370199735
Buffer I/O error on device dm-1, logical block 3021151
lost page write due to I/O error on dm-1
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463269 3463271 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463269 3463271 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463269 3463271 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463265 3463298 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463265 3463298 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3463265 3463298 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464655 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464655 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464655 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361591
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3531510 3531545 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361591
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3531510 3531545 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361591
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3531510 3531545 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464629 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464629 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464629 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464643 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464643 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367527711
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3464635 3464643 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754532 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754530 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754530 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672727
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754530 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672703
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754517 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672703
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754517 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370672703
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [3754390 3754517 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 367264999
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur
red trying to find stat data of [254 211494 0x0 SD]
ReiserFS: dm-1: warning: clm-6006: writing inode 47466 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
ReiserFS: dm-1: warning: clm-6006: writing inode 47466 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370164991
Buffer I/O error on device dm-1, logical block 3016808
lost page write due to I/O error on dm-1
ReiserFS: dm-1: warning: clm-6006: writing inode 47466 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369623559
ReiserFS: dm-1: warning: clm-6006: writing inode 47466 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370164991
Buffer I/O error on device dm-1, logical block 3016808
lost page write due to I/O error on dm-1
ReiserFS: dm-1: warning: clm-6006: writing inode 15890 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 15890 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 15890 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 15890 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 3461683 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 3461683 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361511
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur red trying to find stat data of [37634 3690495 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361479
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur red trying to find stat data of [37634 3692553 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361511
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur red trying to find stat data of [37634 3690495 0x0 SD]
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 369361479
ReiserFS: dm-1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occur red trying to find stat data of [37634 3692553 0x0 SD]
ReiserFS: dm-1: warning: clm-6006: writing inode 3461683 on readonly FS
ReiserFS: dm-1: warning: clm-6006: writing inode 3461683 on readonly FS
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdc, sector 370199119
Buffer I/O error on device dm-1, logical block 3021074
lost page write due to I/O error on dm-1
|
|
|
| Back to top |
|
 |
michaelkuijn
n00b
Joined: 28 Sep 2003
Posts: 72
Location: The Netherlands
|
| Posted: Thu Jun 21, 2007 11:14 am Post subject: |
|
|
Froze again...  Further info:
lspci
| Code: | 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 81)
00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express Root Port (rev 81)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0147 (rev a2)
02:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
02:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
02:01.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
02:04.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
02:05.0 Communication controller: Agere Systems Unknown device 0620 |
complete dmesg (after reboot)
| Code: | Linux version 2.6.20-gentoo-r8 (root@picapica) (gcc version 3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)) #1 SMP PREEMPT Sat May 19 23:54:39 CEST 2007
Command line: root=/dev/ram0 real_root=/dev/personal/slash udev dolvm2 vga=0x318 video=vesafb:mtrr,ywrap,1024x768-32@85 splash=verbose,theme:gentoo-black CONSOLE=/dev/tty1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP (v000 IntelR ) @ 0x00000000000f8dd0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3040
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0
ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee7b80
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee7a80
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000007fee7c00
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x000000007fee8090
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 524000
On node 0 totalpages: 523903
DMA zone: 56 pages used for memmap
DMA zone: 1261 pages reserved
DMA zone: 2682 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512796 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 32128 bytes of per cpu data
Built 1 zonelists. Total pages: 515478
Kernel command line: root=/dev/ram0 real_root=/dev/personal/slash udev dolvm2 vga=0x318 video=vesafb:mtrr,ywrap,1024x768-32@85 splash=verbose,theme:gentoo-black CONSOLE=/dev/tty1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 2056652k/2096000k available (3104k kernel code, 38672k reserved, 1266k data, 248k init)
Calibrating delay using timer specific routine.. 5990.56 BogoMIPS (lpj=11981138)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12469266
Detected 12.469 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.55 BogoMIPS (lpj=11971107)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2992.632 MHz processor.
migration_cost=508
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: f4000000-fbffffff
PREFETCH window: d8000000-dfffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fde00000-fdefffff
PREFETCH window: fdd00000-fddfffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1720k freed
NTFS driver 2.1.28 [Flags: R/O].
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
Real Time Clock Driver v1.12ac
ppdev: user-space parallel port driver
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 6144k, total 131072k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI: Thermal Zone [THRM] (65 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc20000020000, 00:13:d3:b0:11:96, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: SONY DVD RW DW-Q31A, ATAPI CD/DVD-ROM drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000c52260]
hdb: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
hda: hw_config=0000
hda: hw_config=0000
hdb: hw_config=0000
hdb: hw_config=0000
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hda: hw_config=0000
, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 40X DVD-ROM drive, 254kB Cache, UDMA(33)
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF600 irq 19
ata2: SATA max UDMA/133 cmd 0xF800 ctl 0xF702 bmdma 0xF608 irq 19
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata1.01: ata1: dev 1 multi count 16
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : ata_piix
ata2.00: ATA-6, max UDMA/100, 234441648 sectors: LBA
ata2.00: ata2: dev 0 multi count 16
ata2.01: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata2.01: ata2: dev 1 multi count 16
ata2.00: configured for UDMA/100
ata2.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
scsi 1:0:0:0: Direct-Access ATA ST3120023A 3.30 PQ: 0 ANSI: 5
SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 1:0:0:0: Attached scsi disk sdc
scsi 1:0:1:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 1:0:1:0: Attached scsi disk sdd
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
usb 1-3: new high speed USB device using ehci_hcd and address 2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 1-6.3: new low speed USB device using ehci_hcd and address 6
usb 1-6.3: configuration #1 chosen from 1 choice
usb 4-1.1: new full speed USB device using uhci_hcd and address 3
usb 4-1.1: configuration #1 chosen from 1 choice
usb 4-1.3: new low speed USB device using uhci_hcd and address 4
usb 4-1.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Chicony USB Wireless HID Receiver as /class/input/input3
input: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.7-6.3
input: Chicony USB Wireless HID Receiver as /class/input/input4
input: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.7-6.3
input: Chicony USB Wireless HID Receiver as /class/input/input5
input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.7-6.3
input: Dell Dell USB Keyboard Hub as /class/input/input6
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.2-1.1
input: Dell Dell USB Keyboard Hub as /class/input/input7
input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.2-1.1
input: Logitech USB-PS/2 Optical Mouse as /class/input/input8
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1.3
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver cdc_ether
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input9
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
NET: Registered protocol family 17
Freeing unused kernel memory: 248k freed
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: replayed 47 transactions in 3 seconds
ReiserFS: dm-1: Using r5 hash to sort names
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17
saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 17, latency: 32, mmio: 0xfdeff000
saa7133[0]: subsystem: 16be:0007, board: Medion 7134 [card=12,insmod option]
saa7133[0]: board init: gpio is 0
saa7133[0]: i2c eeprom 00: be 16 07 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 23 02 51 96 2b
saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7133[0]: i2c eeprom 40: ff 28 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c scan: found device @ 0x10 [???]
saa7133[0]: i2c scan: found device @ 0x1c [???]
saa7133[0]: i2c scan: found device @ 0x96 [???]
saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
saa7133[0]: i2c scan: found device @ 0xa2 [???]
saa7133[0] Cant determine tuner type 28 from EEPROM
saa7133[0] Tuner type is 33
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
saa7133[1]: found at 0000:02:04.0, rev: 209, irq: 20, latency: 32, mmio: 0xfdefc000
saa7133[1]: subsystem: 16be:0008, board: Medion 7134 [card=12,insmod option]
saa7133[1]: board init: gpio is 0
saa7133[1]: i2c eeprom 00: be 16 08 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7133[1]: i2c eeprom 20: 01 40 01 02 02 03 01 0f 0f ff 00 3c 02 51 96 2b
saa7133[1]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7133[1]: i2c eeprom 40: ff 28 00 c0 96 10 03 01 c0 1c fd 79 44 9f c2 8f
saa7133[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[1]: i2c scan: found device @ 0x10 [???]
saa7133[1]: i2c scan: found device @ 0x1c [???]
saa7133[1]: i2c scan: found device @ 0x96 [???]
saa7133[1]: i2c scan: found device @ 0xa0 [eeprom]
saa7133[1]: i2c scan: found device @ 0xa2 [???]
saa7133[1] Cant determine tuner type 28 from EEPROM
saa7133[1] Tuner type is 33
saa7133[1]: registered device video1 [v4l2]
saa7133[1]: registered device vbi1
saa7133[1]: registered device radio1
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8776 Mon Oct 16 21:53:43 PDT 2006
ReiserFS: dm-1: Removing [119839 3463669 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463656 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463655 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463654 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463653 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463652 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463649 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463648 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463647 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463631 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463630 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463629 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463627 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463625 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3463624 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3462702 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461746 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461737 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461731 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461726 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461712 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461686 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461685 0x0 SD]..done
ReiserFS: dm-1: Removing [119839 3461684 0x0 SD]..done
ReiserFS: dm-1: There were 24 uncompleted unlinks/truncates. Completed
ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
fbsplash: console 0 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'gentoo-black'
fbsplash: switched splash state to 'on' on console 10
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
**WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it!
vmmon: no version magic, tainting kernel.
/dev/vmmon[6636]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6636]: Module vmmon: initialized
vmnet: no version magic, tainting kernel.
/dev/vmnet: open called by PID 6671 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 6699 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6869 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6870 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6893 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6898 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
eth0: no IPv6 routers present
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present |
kernel config
| Code: | ONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_X86_PC=y
CONFIG_MPSC=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=2
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_HT_IRQ=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_ATA=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HW_RANDOM=y
CONFIG_RTC=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISA=m
CONFIG_HWMON=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_USB_STV680=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_IR=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_FB_SPLASH=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_HDA_INTEL=m
CONFIG_AC97_BUS=m
CONFIG_HID=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_DNOTIFY=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_SMB_FS=y
CONFIG_CIFS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_BITREVERSE=y
CONFIG_CRC32=y
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y |
|
|
| Back to top |
|
|
mikers456
n00b
Joined: 07 Jul 2004
Posts: 36
|
| Posted: Mon Jul 02, 2007 4:43 am Post subject: |
|
|
Assuming you haven't solved this problem.
Please provide:
- cat /proc/interrupts
- lspci -v
My suspicion would be that:
- You are sharing IRQs on high-irq load devices (eg. your IRQ 18 is shared between IDE and Realtek eth card)
- You are seeing crashes as a result of this
- Check that your video card does not share any IRQs at all (should have its own)
- See if you can spread IRQs around so that high-IRQ load devices all have own IRQ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
