| View previous topic :: View next topic |
| Author |
Message |
manuels
Advocate
Joined: 22 Nov 2003
Posts: 2146
Location: Europe
|
 Posted: Wed Sep 26, 2007 12:14 pm Post subject: Laptop-Lid schließen wird nicht erkannt [magicly solved] |
 |
|
Moin zusammen,
irgendwie erkennt der Kernel nicht, dass mein Laptop-Lid geschlossen wird.
In /proc/acpi/button/lid/LID/state steht auch wenn ich das Lid schließe "open"
Der Bildschirm wird allerdings (wohl BIOS-bedingt) schwarz.
Auch werden die ACPI-Events natürlich nicht verarbeitet.
Hier die Config:
| Code: | CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
|
Danke für Hinweise!
Manuel
_________________
Build your own live cd with catalyst 2.0!
Last edited by manuels on Thu Sep 27, 2007 2:11 pm; edited 1 time in total |
|
| Back to top |
|
 |
theotherjoe
Guru
Joined: 22 Nov 2003
Posts: 393
|
| Posted: Thu Sep 27, 2007 8:38 am Post subject: |
|
|
irgendwelche interessante ACPI meldungen in dmesg??
hat das BIOS ACPI optionen mit denen du spielen kannst? |
|
| Back to top |
|
|
manuels
Advocate
Joined: 22 Nov 2003
Posts: 2146
Location: Europe
|
| Posted: Thu Sep 27, 2007 2:05 pm Post subject: |
|
|
geht so:
| Code: | dmesg | grep -i acpi
BIOS-e820: 000000003ff60000 - 000000003ff6a000 (ACPI data)
BIOS-e820: 000000003ff6a000 - 000000003ff80000 (ACPI NVS)
ACPI: RSDP 000F89C0, 0014 (r0 PTLTD )
ACPI: RSDT 3FF65080, 003C (r1 FSC PC 6040000 LTP 0)
ACPI: FACP 3FF69D10, 0074 (r1 NVIDIA MCP51M 6040000 PTL_ F4240)
ACPI: DSDT 3FF650BC, 4C54 (r1 FIC PTB50 6040000 MSFT 100000E)
ACPI: FACS 3FF6AFC0, 0040
ACPI: SSDT 3FF69D84, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: MCFG 3FF69F06, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: HPET 3FF69F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC 3FF69F7A, 005E (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 3FF69FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
ACPI: Core revision 20070126
tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 [20070126]
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FN1] to D3
ACPI: Transitioning device [FN1] to D3
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
ACPI: Transitioning device [FN2] to D3
ACPI: Fan [FN2] (off)
ACPI: Thermal Zone [THRM] (44 C)
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 20
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LK1E] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 18 (level, low) -> IRQ 18
|
Obacht:
ACPI: Lid Switch [LID]
Im BIOS gibts nichts ACPI-mäßiges 
EDIT: Hää? Ich hab mal wirklich nichts verändert. Nun läufts ohne Probleme  
_________________
Build your own live cd with catalyst 2.0! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
