| View previous topic :: View next topic |
| Author |
Message |
GNUtoo
Veteran
Joined: 05 May 2005
Posts: 1919
|
 Posted: Tue Jul 29, 2008 5:40 pm Post subject: hostapd segfault |
 |
|
hello,
i'm migrating my router/access point/server from FreeBSD to Gentoo in order to have asterisk....
but i have to manualy start hostapd like this:
/etc/init.d/hostapd start
otherwise at boot it segfault...i know it because there is this line in /var/log/messages:
Jul 29 18:45:52 router [ 59.285002] hostapd[6940]: segfault at 0 ip 0804dced sp bf87df20 error 4 in hostapd[8048000+6c000]
what could be the reason...
Here's my config:
*kernel 2.6.26 vanilla
*patch for allowing the master mode in the 2.6.26 kernel(allow-ap-vlan-modes)
*ralink rt2500 pci with a special antenna
*hostapd from git
*this config:
| Code: | interface=wlan0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=my_essid_contains_underscores
country_code=IT
hw_mode=g
channel=11
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wme_enabled=1
wme_ac_bk_cwmin=4
wme_ac_bk_cwmax=10
wme_ac_bk_aifs=7
wme_ac_bk_txop_limit=0
wme_ac_bk_acm=0
wme_ac_be_aifs=3
wme_ac_be_cwmin=4
wme_ac_be_cwmax=10
wme_ac_be_txop_limit=0
wme_ac_be_acm=0
wme_ac_vi_aifs=2
wme_ac_vi_cwmin=3
wme_ac_vi_cwmax=4
wme_ac_vi_txop_limit=94
wme_ac_vi_acm=0
wme_ac_vo_aifs=2
wme_ac_vo_cwmin=2
wme_ac_vo_cwmax=3
wme_ac_vo_txop_limit=47
wme_ac_vo_acm=0
eapol_key_index_workaround=0
eap_server=0 |
here's /etc/conf.d/net:
| Code: | config_eth1=( null )
config_ppp0=( "ppp" )
link_ppp0="eth1"
plugins_ppp0=( "pppoe" )
username_ppp0='user'
password_ppp0='password'
pppd_ppp0=(
"noauth"
"defaultroute"
"usepeerdns"
"holdoff 3"
"child-timeout 60"
"lcp-echo-interval 15"
"lcp-echo-failure 3"
noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
)
depend_ppp0() {
need net.eth1
}
modules_wlan0=( "!iwconfig" "!wpa_supplicant" )
config_eth0=( "192.168.0.1/24" )
config_wlan0=( "192.168.1.1/24" ) |
and here's /etc/conf.d/hostapd
| Code: | INTERFACES="wlan0"
CONFIGS="/etc/hostapd/hostapd.conf"
OPTIONS="" |
|
|
| Back to top |
|
 |
alex.blackbit
Advocate
Joined: 26 Jul 2005
Posts: 2397
|
| Posted: Wed Jul 30, 2008 9:27 am Post subject: |
|
|
| could it be that for some reason during boot hostapd is started before your wlan card? |
|
| Back to top |
|
|
humanthing
Tux's lil' helper
Joined: 29 Nov 2006
Posts: 141
|
| Posted: Fri Aug 15, 2008 12:30 pm Post subject: |
|
|
Oh... I posted in an other thread before reading this one...
Does the rt2500 support master mode now?
I'm not so experienced, but trying to set up a kind of WLAN-Router.
Any help is appreciated!
_________________
""Sir! We are surrounded!" - "Excellent! We can attack in any direction!"" |
|
| Back to top |
|
|
|
Networking & Security
