Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in

  FAQ | Search | Memberlist | Usergroups | Statistics | Profile | Log in to check your private messages | Log in | Register

problemi con wpa
 View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
deneb4
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jan 2006
Posts: 80
Location: Foligno (PG)
PostPosted: Tue Jul 17, 2007 2:11 pm    Post subject: problemi con wpa Reply with quote
Sto cercando di connettermi ad una rete protetta da wpa. La scheda wireless e' una Broadcom:
Code:
00:0a.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)

Inizialmente usavo i driver si windows con ndiswrapper, ora ho istallato i driver che ci sono nel kernel seguendo una guida trovata su questo forum.

Riesco ad utilizzare una rete non protetta, ma con il wpa no, sebbene abbia istallato wpa_supplicant. Vi posto un po di dati:

Code:
denebtux deneb # lsmod|grep bcm
bcm43xx               416416  0
ieee80211softmac       30464  1 bcm43xx
ieee80211              42612  2 bcm43xx,ieee80211softmac


Code:
denebtux deneb # iwlist wlan0 scan
wlan0     Scan completed :
          Cell 01 - Address: 00:E0:98:56:2A:76
                    ESSID:"casa_braschi"
                    Protocol:IEEE 802.11bg
                    Mode:Master
                    Channel:11
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
                    Quality=100/100  Signal level=-30 dBm  Noise level=-61 dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 52ms ago


Di seguito l'/etc/wpa_supplicant.conf
Code:

ctrl_interface_group=wheel
#
# home network; allow all valid ciphers

eapol_version=1
#ap_scan=1
#fast_reauth=1
network={
       ssid="casa_braschi"
       scan_ssid=1
       key_mgmt=WPA-PSK
       psk="password"
}


Code:
denebtux deneb # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface_group='wheel' (DEPRECATED)
eapol_version=1
Line: 10 - start of a new network block
ssid - hexdump_ascii(len=12):
     63 61 73 61 5f 62 72 61 73 63 68 69               casa_braschi
scan_ssid=1 (0x1)
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=9): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='casa_braschi'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:0b:6b:48:dd:d7
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=12):
     63 61 73 61 5f 62 72 61 73 63 68 69               casa_braschi
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 665 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:e0:98:56:2a:76 ssid='casa_braschi' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:e0:98:56:2a:76 (SSID='casa_braschi' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWFREQ]: Invalid argument
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b1a len=28
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b19 len=16
Received 622 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:e0:98:56:2a:76 ssid='casa_braschi' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Already associated with the selected AP.
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c02 len=29
WEXT: Custom wireless event: 'authenticated'
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: 00:e0:98:56:2a:76
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:e0:98:56:2a:76
No keys have been configured - skip key clearing
Associated with 00:e0:98:56:2a:76
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from 00:e0:98:56:2a:76
RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 42 41 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
  EAPOL-Key type=254
  key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack)
  key_length=32 key_data_length=0
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 42 41
  key_nonce - hexdump(len=32): 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 42 41 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:e0:98:56:2a:76 (ver=1)
WPA: Renewed SNonce - hexdump(len=32): 50 92 06 4b f4 7c ef f4 66 4a fa 36 91 83 85 60 ae c1 87 12 19 10 8a 72 10 45 a4 1d 07 37 23 18
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 09 00 20 00 00 00 00 00 00 42 41 50 92 06 4b f4 7c ef f4 66 4a fa 36 91 83 85 60 ae c1 87 12 19 10 8a 72 10 45 a4 1d 07 37 23 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c9 7c 99 3f 18 6f 19 6c 63 fd af 9d 4c a8 bf 24 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
RX EAPOL from 00:e0:98:56:2a:76
RX EAPOL - hexdump(len=123): 01 03 00 77 fe 01 c9 00 20 00 00 00 00 00 00 42 42 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 89 43 64 61 68 49 30 40 20 fb d5 97 cd 96 40 94 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
IEEE 802.1X RX: version=1 type=3 length=119
  EAPOL-Key type=254
  key_info 0x1c9 (ver=1 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
  key_length=32 key_data_length=24
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 42 42
  key_nonce - hexdump(len=32): 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 89 43 64 61 68 49 30 40 20 fb d5 97 cd 96 40 94
WPA: RX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 c9 00 20 00 00 00 00 00 00 42 42 29 4d 58 f4 0e e3 06 7a 0e 53 e7 5e 46 0f 24 45 aa ec 39 c1 d9 49 43 ed 00 4c 9f 57 b5 4c 57 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 89 43 64 61 68 49 30 40 20 fb d5 97 cd 96 40 94 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from 00:e0:98:56:2a:76 (ver=1)
WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 01 09 00 20 00 00 00 00 00 00 42 42 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ea f5 79 0f 99 12 d2 4a af c5 d1 49 1a 45 6c 43 00 00
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_wext_set_key: alg=2 key_idx=0 set_tx=1 seq_len=6 key_len=32
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RX EAPOL from 00:e0:98:56:2a:76
RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 42 43 c1 bd cd ed cc 36 89 7e b3 1d 23 f2 13 ca df 8f 16 a8 8b 54 f0 f1 4b b4 ac b3 34 8b c1 a2 cf d9 6a df a8 fa d9 00 14 a4 0d dc 46 47 4d d6 c7 b3 61 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 fa cc 9d a4 f5 97 17 f6 49 93 3c 81 b1 c7 23 00 20 9f 16 11 3c db af 8c ab 64 95 dd 38 ab 43 57 81 2c 7f e1 6c 00 b6 a6 7f 8e 0c ce 4c ee 9c 5f 47
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
  key_info 0x391 (ver=1 keyidx=1 rsvd=0 Group Ack MIC Secure)
  key_length=32 key_data_length=32
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 42 43
  key_nonce - hexdump(len=32): c1 bd cd ed cc 36 89 7e b3 1d 23 f2 13 ca df 8f 16 a8 8b 54 f0 f1 4b b4 ac b3 34 8b c1 a2 cf d9
  key_iv - hexdump(len=16): 6a df a8 fa d9 00 14 a4 0d dc 46 47 4d d6 c7 b3
  key_rsc - hexdump(len=8): 61 08 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 60 fa cc 9d a4 f5 97 17 f6 49 93 3c 81 b1 c7 23
WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 42 43 c1 bd cd ed cc 36 89 7e b3 1d 23 f2 13 ca df 8f 16 a8 8b 54 f0 f1 4b b4 ac b3 34 8b c1 a2 cf d9 6a df a8 fa d9 00 14 a4 0d dc 46 47 4d d6 c7 b3 61 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 fa cc 9d a4 f5 97 17 f6 49 93 3c 81 b1 c7 23 00 20 9f 16 11 3c db af 8c ab 64 95 dd 38 ab 43 57 81 2c 7f e1 6c 00 b6 a6 7f 8e 0c ce 4c ee 9c 5f 47
WPA: RX message 1 of Group Key Handshake from 00:e0:98:56:2a:76 (ver=1)
State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): 61 08 00 00 00 00
wpa_driver_wext_set_key: alg=2 key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 11 00 20 00 00 00 00 00 00 42 43 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5d fb 1b 21 f5 c5 b5 73 d3 49 a3 ff f0 f4 db ca 00 00
WPA: Key negotiation completed with 00:e0:98:56:2a:76 [PTK=TKIP GTK=TKIP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:e0:98:56:2a:76 completed (auth) [id=0 id_str=]
wpa_driver_wext_set_operstate: operstate 0->1 (UP)
WEXT: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0

Di seguito le ultime righe del dmesg
Code:
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: generic IE set to dd160050f20101000050f20201000050f20201000050f202
SoftMAC: Canceling existing associate request!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Queueing Authentication Request to 00:e0:98:56:2a:76
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:e0:98:56:2a:76.
printk: 108 messages suppressed.
SoftMAC: Open Authentication completed with 00:e0:98:56:2a:76
SoftMAC: sent association request!
SoftMAC: associated!
bcm43xx: set security called, .active_key = 0, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .enabled = 1, .encrypt = 1
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: replay detected: STA=00:e0:98:56:2a:76 previous TSC 000000000860 received TSC 0000000002a8
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
TKIP: ICV error detected: STA=00:e0:98:56:2a:76
bcm43xx: set security called, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0200 (RX) max used slots: 8/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: generic IE set to dd160050f20101000050f20201000050f20201000050f202
SoftMAC: Canceling existing associate request!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Queueing Authentication Request to 00:e0:98:56:2a:76
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:e0:98:56:2a:76.
printk: 83 messages suppressed.
SoftMAC: Open Authentication completed with 00:e0:98:56:2a:76
SoftMAC: sent association request!
SoftMAC: associated!
bcm43xx: set security called, .active_key = 0, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .enabled = 1, .encrypt = 1
printk: 56 messages suppressed.
TKIP: ICV error detected: STA=00:e0:98:56:2a:76


Code:
denebtux deneb # ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr 00:0B:6B:48:DD:D7
          inet6 addr: fe80::20b:6bff:fe48:ddd7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9 errors:0 dropped:14280 overruns:0 frame:0
          TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1185 (1.1 Kb)  TX bytes:11543 (11.2 Kb)
          Interrupt:10 Base address:0xc000

Code:

denebtux deneb # iwconfig wlan0
wlan0     IEEE 802.11b/g  ESSID:"casa_braschi"  Nickname:"Broadcom 4306"
          Mode:Managed  Frequency=2.462 GHz  Access Point: 00:E0:98:56:2A:76
          Bit Rate=11 Mb/s   Tx-Power=15 dBm
          RTS thr:off   Fragment thr:off
          Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000  Security mode:open
          Link Quality=95/100  Signal level=-38 dBm  Noise level=-64 dBm
          Rx invalid nwid:0  Rx invalid crypt:15145  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0



Code:
denebtux deneb # ping 192.168.1.254
PING 192.168.1.254 (192.168.1.254) 56(84) bytes of data.
From 192.168.1.13 icmp_seq=1 Destination Host Unreachable
From 192.168.1.13 icmp_seq=2 Destination Host Unreachable
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....
PostPosted: Tue Jul 17, 2007 2:17 pm    Post subject: Reply with quote
ad occhio direi che hai il file
Code:
/etc/wpa_supplicant.conf
sballato,

dai uno sguardo a
Code:
man wpa_supplicant.conf
configurazione 5.

ciao
Back to top
View user's profile Send private message
Cazzantonio
Bodhisattva
Bodhisattva


Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
PostPosted: Tue Jul 17, 2007 2:40 pm    Post subject: Reply with quote
questo ad esempio è il mio:
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=2

network={
        ssid="<inserisci l'essid>"
        scan_ssid=1
        proto=WPA
        auth_alg=OPEN
        key_mgmt=WPA-PSK
        pairwise=TKIP
# pairwise=CCMP TKIP
        group=TKIP
# group=CCMP TKIP
#psk="<password in formato testo>"
        psk=<password in formato numerico ottenuta tramite "wpa_passphrase">
}

l'esempio è per una cossesione WPA1, se ti connetti ad una WPA2 cambia i parametri pairwise e group sostituendo quelli comentati
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne
Back to top
View user's profile Send private message
deneb4
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jan 2006
Posts: 80
Location: Foligno (PG)
PostPosted: Tue Jul 17, 2007 4:27 pm    Post subject: Reply with quote
Code:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=2

network={
        ssid="casa_braschi"
        scan_ssid=1
        proto=WPA
        auth_alg=OPEN
        key_mgmt=WPA-PSK
        pairwise=TKIP
        #pairwise=CCMP TKIP
        group=TKIP
        #group=CCMP TKIP
        psk= pass in formato numerico
}


Code:
denebtux deneb # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
Trying to associate with SSID 'casa_braschi'
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:e0:98:56:2a:76
Authentication with 00:e0:98:56:2a:76 timed out.
Trying to associate with SSID 'casa_braschi'
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:e0:98:56:2a:76
Authentication with 00:e0:98:56:2a:76 timed out.
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with SSID 'casa_braschi'
Associated with 00:e0:98:56:2a:76


provando nel dmesg mi aggiunge wlan0: no IPv6 routers present
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....
PostPosted: Tue Jul 17, 2007 5:16 pm    Post subject: Reply with quote
@deneb4
hai i moduli
Code:

CONFIG_IEEE80211=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y

abilitati nel kernel vero ?
Back to top
View user's profile Send private message
deneb4
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jan 2006
Posts: 80
Location: Foligno (PG)
PostPosted: Thu Jul 19, 2007 11:34 am    Post subject: Reply with quote
sisi ci sono tutti
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....
PostPosted: Thu Jul 19, 2007 11:56 am    Post subject: Reply with quote
deneb4 wrote:
sisi ci sono tutti


se il comando lo lanci cosi:
Code:
 wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf  -D wext -w

che ti dice ?
Back to top
View user's profile Send private message
deneb4
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jan 2006
Posts: 80
Location: Foligno (PG)
PostPosted: Thu Jul 19, 2007 7:18 pm    Post subject: Reply with quote
usando la chiave "vera":
Code:
denebtux deneb #  wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf  -D wext -w
Trying to associate with SSID 'casa_braschi'
Associated with 00:e0:98:56:2a:76
WPA: Could not find AP from the scan results
WPA: Key negotiation completed with 00:e0:98:56:2a:76 [PTK=TKIP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:e0:98:56:2a:76 completed (auth) [id=0 id_str=]

e qui si ferma.

Mentre usando la chiave calcolata esadecimale:
Code:
denebtux deneb #  wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf  -D wext -w
Trying to associate with SSID 'casa_braschi'
Associated with 00:e0:98:56:2a:76
WPA: 4-Way Handshake failed - pre-shared key may be incorrect
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with SSID 'casa_braschi'


e continua all'infintio
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



 Links: forums.gentoo.org | www.gentoo.org | bugs.gentoo.org | wiki.gentoo.org | forum-mods@gentoo.org

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy