| View previous topic :: View next topic |
| Author |
Message |
bilbravo
Guru
Joined: 30 May 2003
Posts: 319
Location: Baltimore, MD
|
 Posted: Wed Jul 11, 2007 10:05 pm Post subject: eth1: link not ready on bcm43xx module |
 |
|
I can't get this to work... I have a WMP54G with a BCM4306. Seems to be installed properly...
| dmesg wrote: | bcm43xx: PHY disconnected
bcm43xx: PHY connected
bcm43xx: Microcode rev 0xe9, pl 0x2a (2003-05-12 20:52:10)
bcm43xx: Radio turned on
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Associate: Scanning for networks first.
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Unable to find matching network after scan!
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
bcm43xx: Radio turned off
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0260 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x0200 (RX) max used slots: 0/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
|
| Quote: |
bcm43xx: PHY disconnected
bcm43xx: PHY connected
bcm43xx: Microcode rev 0xe9, pl 0x2a (2003-05-12 20:52:10)
bcm43xx: Radio turned on
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Associate: Scanning for networks first.
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Unable to find matching network after scan!
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
bcm43xx: Radio turned off
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0260 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x0200 (RX) max used slots: 0/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
| Quote: |
bravo-gentoo ~ # iwconfig eth1 enc <wep key>
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Operation not supported.
|
|
Any ideas what is stopping it? Improper net configuration?
_________________
me |
|
| Back to top |
|
 |
mattsteven
Apprentice
Joined: 27 Oct 2003
Posts: 240
Location: Your Planet
|
| Posted: Thu Jul 19, 2007 9:05 pm Post subject: |
|
|
I believe that card is not fully supported by any native drivers yet.
I just recently got mine to work (even with WPA) on ndiswrapper without a hitch.
Documentation on how to do that abounds so I'll leave you with that.
_________________
Matthew Steven
Linux-only desktop since 1998
Graying hair since 2006 |
|
| Back to top |
|
|
|
Networking & Security
