| View previous topic :: View next topic |
| Author |
Message |
Martin.
n00b
Joined: 16 Feb 2007
Posts: 71
Location: Switzerland
|
 Posted: Sun Jul 29, 2007 9:12 am Post subject: [Disque dur] Impossible d'activer le DMA |
 |
|
Bonjour à tous !
J'ai un nouveau problème, qui concerne cette fois mon disque dur...
Voilà, j'ai installé hier sur ma machine l'ancien disque dur de la machine de ma soeur, or il me pose quelques problèmes.
Au démarrage de Gentoo, j'obtiens plusieurs fois :
| Quote: | hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336, sector=391023$
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336, sector=391023$
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=39102336, sector=391023$
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
ide: failed opcode was: unknown
hda: DMA disabled
hdb: DMA disabled
ide0: reset: success
hdb: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=39167615, sector=39$
ide: failed opcode was: unknown
|
Et il y en a plein comme ca.
Pourtant, je n'ai jamais eu de problème de DMA avec le premier disque dur, qui lui fonctionne à merveille, et je me suis assuré dans le BIOS qu'il était activé pour les deux disques durs.
Une idée, à part jeter ce DD qui fonctionne pourtant ?[/quote] |
|
| Back to top |
|
 |
DuF
Advocate
Joined: 09 Dec 2002
Posts: 2687
Location: Paris
|
| Posted: Sun Jul 29, 2007 9:49 am Post subject: |
|
|
Essaye de voir ce que te retournes smart comme infos sur le disque. Si jamais tu ne l'as pas c'est le paquet :
| Code: | * sys-apps/smartmontools
Latest version available: 5.36-r1
Latest version installed: 5.36-r1
Size of files: 528 kB
Homepage: http://smartmontools.sourceforge.net/
Description: control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.)
License: GPL-2
|
[EDIT]Je précise que c'est smartctl qu'il faut utiliser pour un compte-rendu rapide.
Par exemple, si ton disque est /dev/hda, tu pourras faire la commande :
| Code: | smartctl -a /dev/hda
|
Ce qu'il sera intérêssant de voir c'est s'il y a des erreurs de présentes déjà, s'il y a des erreurs il sera intérêssant de lancer un self-test sur le disque pour qu'il t'indique la durée de vie estimée du disque. |
|
| Back to top |
|
|
Martin.
n00b
Joined: 16 Feb 2007
Posts: 71
Location: Switzerland
|
| Posted: Sun Jul 29, 2007 11:26 am Post subject: |
|
|
| Quote: | smartctl -a /dev/hdb
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate U Series 5 family
Device Model: ST320413A
Serial Number: 5ED0Y2SA
Firmware Version: 3.54
User Capacity: 20,020,396,032 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 4
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Jul 29 13:24:40 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 422) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000e 071 053 025 Old_age Always - 101996519
3 Spin_Up_Time 0x0002 075 072 000 Old_age Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1256
5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0
7 Seek_Error_Rate 0x000e 071 060 030 Old_age Always - 47401095129
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18791
10 Spin_Retry_Count 0x0012 100 100 097 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1370
194 Temperature_Celsius 0x0022 042 050 000 Old_age Always - 42
195 Hardware_ECC_Recovered 0x001a 073 055 000 Old_age Always - 176812252
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 18735 hours (780 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:01:48.111 READ DMA
ef 03 45 01 4f c2 a0 00 00:01:48.109 SET FEATURES [Set transfer mode]
ef 03 0c 01 4f c2 a0 00 00:01:48.109 SET FEATURES [Set transfer mode]
c6 da 10 01 4f c2 a0 00 00:01:48.108 SET MULTIPLE MODE
b0 da 00 01 4f c2 a0 00 00:01:48.011 SMART RETURN STATUS
Error 10 occurred at disk power-on lifetime: 18735 hours (780 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:00:13.768 READ DMA
ef 03 45 01 4f c2 a0 00 00:00:13.766 SET FEATURES [Set transfer mode]
ef 03 0c 01 4f c2 a0 00 00:00:13.766 SET FEATURES [Set transfer mode]
c6 da 10 01 4f c2 a0 00 00:00:13.766 SET MULTIPLE MODE
b0 da 00 01 4f c2 a0 00 00:00:13.648 SMART RETURN STATUS
Error 9 occurred at disk power-on lifetime: 18735 hours (780 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:00:13.810 READ DMA
ef 03 45 01 4f c2 a0 00 00:00:13.808 SET FEATURES [Set transfer mode]
ef 03 0c 01 4f c2 a0 00 00:00:13.808 SET FEATURES [Set transfer mode]
c6 da 10 01 4f c2 a0 00 00:00:13.807 SET MULTIPLE MODE
b0 da 00 01 4f c2 a0 00 00:00:13.707 SMART RETURN STATUS
Error 8 occurred at disk power-on lifetime: 18735 hours (780 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:00:33.194 READ DMA
ef 03 45 01 00 00 a0 00 00:00:33.192 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 a0 00 00:00:33.191 SET FEATURES [Set transfer mode]
c6 20 10 01 00 00 a0 00 00:00:33.191 SET MULTIPLE MODE
ec 20 3f 01 00 00 a0 00 00:00:33.189 IDENTIFY DEVICE
Error 7 occurred at disk power-on lifetime: 18735 hours (780 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 a0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 20 01 01 00 00 a0 00 00:00:13.671 READ DMA
ef 03 45 01 00 00 a0 00 00:00:13.669 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 a0 00 00:00:13.669 SET FEATURES [Set transfer mode]
c6 20 10 01 00 00 a0 00 00:00:13.668 SET MULTIPLE MODE
ec 20 3f 01 00 00 a0 00 00:00:13.666 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 18791 -
# 2 Short offline Aborted by host 90% 18791 -
# 3 Short offline Aborted by host 70% 18791 -
# 4 Short captive Completed without error 00% 0 -
Device does not support Selective Self Tests/Logging |
Voici la sortie de smartctl -a /dev/hdb. Je ne vois pas en quoi ca peut m'aider, merci de m'éclairer ?
Merci aussi pour ton aide  |
|
| Back to top |
|
|
DuF
Advocate
Joined: 09 Dec 2002
Posts: 2687
Location: Paris
|
| Posted: Sun Jul 29, 2007 11:51 am Post subject: |
|
|
Déjà ton disque rapporte des erreurs, donc il n'a pas l'air en très grande forme.
Ce que tu peux faire en complément, c'est lui faire faire un test, avec la commande :
| Code: | | smartctl -t short /dev/hdb |
Cela te donnera les résultats d'un test rapide (d'autres types de tests sont possibles mais autant faire celui là en premier).
Le type de résultat intérêssant sera ce genre de lignes :
| Code: | SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 816 -
|
Comme tu vois, c'est le résultat sur mon disque, pas d'erreurs et durée de vie encore lointaine. Sur le tiens, on voit qu'il a fait des tests qui ont rapportés des erreurs ou qui n'ont pas pu allés à leur terme, donc c'est pour ça qu'il serait intérêssant d'en forcer un pour voir le résultat du dernier test smart sur ton disque. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
