| View previous topic :: View next topic |
| Author |
Message |
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
 Posted: Fri Jul 27, 2007 9:19 am Post subject: Gentoo 2007.0 - amd64 - realtek HDA [Solved] |
 |
|
I just bought following laptop (Znote 6224W 14,1" WXGA+):
+Intel C2 DUO T7700 2,40GHz 800MHZ
+4 GB (2x2GB) DDR2 PC6400
+100GB SATA, 2,5" 7200RPM - HITACH
+SAMSUNG DVD-RW Slot-in 6xx4W/6xx5
+Intel Pro/Wireless 4965AGN
+nVidia(r) Geforce Go 8600 512MB
-Intel Wireless 4965AGN
-Realtek High Definition Audio
Everything works perfekt with Gentoo 2007.0 (amd64) but the two last are
the one I have problems with:
-I don't seem to find the wireless card ipw4965 in the portage tree ...
-And the realtek audio card is recognized as an Intel HDA ... lpsci ... and
when I run alsaconf it gives following error message:
"No suported PnP or PCI card found."
Can anybody help ?
Update 2007-10-26: How to resolve Audio problem.
https://forums.gentoo.org/viewtopic-p-4422194.html#4422194
_________________
Windows who ?
Last edited by now112 on Fri Oct 26, 2007 10:13 am; edited 2 times in total |
|
| Back to top |
|
 |
didymos
Advocate
Joined: 10 Oct 2005
Posts: 4798
Location: California
|
| Posted: Fri Jul 27, 2007 2:34 pm Post subject: Re: Gentoo 2007.0 - amd64 - ipw4965 - realtek HDA |
|
|
| now112 wrote: | | -I don't seem to find the wireless card ipw4965 in the portage tree ... |
You'll want to use the 2.6.22 kernel and the iwlwifi driver:
net-wireless/iwlwifi
net-wireless/iwl4965-ucode
Currently, these are hard masked, as they are quite new and use the new wireless stack introduced in 2.6.22. See here:
http://intellinuxwireless.org/
| Quote: |
-And the realtek audio card is recognized as an Intel HDA ... lpsci ... and
when I run alsaconf it gives following error message:
"No suported PnP or PCI card found."
|
OK, post the lspci output and the audio parts of the kernel config.
_________________
Thomas S. Howard |
|
| Back to top |
|
|
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
| Posted: Fri Jul 27, 2007 6:03 pm Post subject: Re: Gentoo 2007.0 - amd64 - ipw4965 - realtek HDA |
|
|
| didymos wrote: |
You'll want to use the 2.6.22 kernel and the iwlwifi driver:
net-wireless/iwlwifi
net-wireless/iwl4965-ucode
Currently, these are hard masked, as they are quite new and use the new wireless stack introduced in 2.6.22. See here:
http://intellinuxwireless.org/
|
Thank you very much ... it works perfectly 
| didymos wrote: | | OK, post the lspci output and the audio parts of the kernel config. |
| Code: |
genTauro linux # lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
|
| Code: |
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
|
_________________
Windows who ? |
|
| Back to top |
|
|
didymos
Advocate
Joined: 10 Oct 2005
Posts: 4798
Location: California
|
| Posted: Fri Jul 27, 2007 6:15 pm Post subject: |
|
|
Alright, try ALSA using this method instead of the current setup: http://gentoo-wiki.com/HOWTO_Compile_Kernel_with_ALSA. You've actually got ALSA and the old OSS stuff built-in at the same time, which you don't want, plus this:
| Code: |
# CONFIG_SND_SEQUENCER_OSS is not set
|
should be enabled as well.
_________________
Thomas S. Howard |
|
| Back to top |
|
|
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
| Posted: Fri Jul 27, 2007 6:37 pm Post subject: |
|
|
| didymos wrote: | Alright, try ALSA using this method instead of the current setup: http://gentoo-wiki.com/HOWTO_Compile_Kernel_with_ALSA. You've actually got ALSA and the old OSS stuff built-in at the same time, which you don't want, plus this:
| Code: |
# CONFIG_SND_SEQUENCER_OSS is not set
|
should be enabled as well. |
Hi again when I click on the link I get to this page:
| Code: |
HOWTO Compile Kernel with ALSA.
From Gentoo Linux Wiki
Jump to: navigation, search
There is currently no text in this page, you can search for this page title in other pages or edit this page.
|
_________________
Windows who ? |
|
| Back to top |
|
|
didymos
Advocate
Joined: 10 Oct 2005
Posts: 4798
Location: California
|
|
| Back to top |
|
|
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
| Posted: Sat Jul 28, 2007 12:05 pm Post subject: |
|
|
Hi again I compiled the kernel as described in the how to guide and it still doesn't work 
| Code: |
mon@genTauro ~/$ lsmod
Module Size Used by
snd_seq_oss 31360 0
snd_seq_midi_event 8896 1 snd_seq_oss
snd_seq 50816 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8980 2 snd_seq_oss,snd_seq
snd_pcm_oss 41568 0
snd_mixer_oss 16832 1 snd_pcm_oss
ieee80211_crypt_tkip 11968 0
ieee80211_crypt_ccmp 8576 0
ieee80211_crypt_wep 6720 0
ieee80211 31624 0
ieee80211_crypt 7424 4 ieee80211_crypt_tkip,ieee80211_crypt_ccmp,ieee80211_crypt_wep,ieee80211
pcmcia 35864 0
nvidia 8108664 26
i2c_core 23296 1 nvidia
yenta_socket 26188 1
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 36260 3 pcmcia,yenta_socket,rsrc_nonstatic
iwl4965 188644 0
snd_hda_intel 304608 1
snd_pcm 75720 2 snd_pcm_oss,snd_hda_intel
mac80211 118212 1 iwl4965
snd_timer 21832 2 snd_seq,snd_pcm
snd 52712 10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
soundcore 8992 1 snd
snd_page_alloc 10000 2 snd_hda_intel,snd_pcm
|
Audio works in vista (dual boot) so I supouse it has to work :/
_________________
Windows who ? |
|
| Back to top |
|
|
didymos
Advocate
Joined: 10 Oct 2005
Posts: 4798
Location: California
|
| Posted: Sat Jul 28, 2007 1:01 pm Post subject: |
|
|
Same errors or different? Also, did you run alsamixer and unmute the necessary controls (Usually Front, PCM)?
_________________
Thomas S. Howard |
|
| Back to top |
|
|
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
| Posted: Sat Jul 28, 2007 2:12 pm Post subject: |
|
|
| didymos wrote: | | Same errors or different? Also, did you run alsamixer and unmute the necessary controls (Usually Front, PCM)? |
http://www.stermon.com/temp/alsamixer_audio.png
Well the only errors is that there is no sound ... 
_________________
Windows who ? |
|
| Back to top |
|
|
now112
n00b
Joined: 16 Dec 2006
Posts: 39
Location: Valby, Denmark
|
| Posted: Thu Aug 02, 2007 8:12 pm Post subject: |
|
|
I followed this post because it was marked at solved, but the RealTek soundcard
is not the same and the arch isn't either:
https://forums.gentoo.org/viewtopic-t-569363-highlight-hda+realtek.html
the last 2 weeks I spent on trying to make the audio sound om my laptop, and I'm
beginning to get a little bit tired of this.
even windows vista x64 had no problem installing the realtek official drivers 
What I tried:
-Enable alsa in kernel (Intel HDA as module)
-Paludis -i alsa-driver (disabling alsa in kernel)
-Download from realtek ftp://202.65.194.211/pc/audio/realtek-linux-audiopack-4.06a.tar.bz2
nothing really seems to work  anybody else maybe got a clue 
_________________
Windows who ? |
|
| Back to top |
|
|
|
Kernel & Hardware
