| View previous topic :: View next topic |
| Author |
Message |
tuxian
l33t
Joined: 26 Jan 2004
Posts: 766
Location: Austria
|
 Posted: Fri Aug 03, 2007 9:50 am Post subject: Huawei E870 Connect Card - no connection [solved] |
 |
|
Hi,
i bought the Huawei E870 HSPDA Connect Card and tried several howtos for the E220 and E630 card.
Link to the card: http://www.a1.net/CDA/pp4linkredir/1,6202,502085,00.html
The vendor and product id is the same of E220 cards:
| Code: | root@laptop: pts/6: 66 files 207Mb -> lsusb
Bus 005 Device 002: ID 12d1:1003
Bus 005 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0930:0505 Toshiba Corp.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 0fce:d030 Sony Ericsson Mobile Communications AB
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Fre Aug 3 11:30:11 CEST 2007
/home/markus
root@laptop: pts/6: 66 files 207Mb -> lsusb -v -s 005:002
Bus 005 Device 002: ID 12d1:1003
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1
idProduct 0x1003
bcdDevice 0.00
iManufacturer 1 HUAWEI Technologies
iProduct 2 HUAWEI Mobile
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Fre Aug 3 11:30:17 CEST 2007
/home/markus
root@laptop: pts/6: 66 files 207Mb -> find /dev/ | grep ttyU
/dev/ttyUSB0
/dev/.udev/db/class@tty@ttyUSB0 |
/dev/ttyUSB0 is created but not /dev/ttyUSB1 and /dev/ttyUSB2.
I also tried to remove the usb-storage kernel modul but it didn't help.
output of /var/log/messages:
| Code: | Aug 3 11:41:46 laptop pccard: CardBus card inserted into slot 0
Aug 3 11:41:46 laptop PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
Aug 3 11:41:46 laptop ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Aug 3 11:41:46 laptop PCI: Setting latency timer of device 0000:03:00.0 to 64
Aug 3 11:41:46 laptop ohci_hcd 0000:03:00.0: OHCI Host Controller
Aug 3 11:41:46 laptop ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
Aug 3 11:41:46 laptop ohci_hcd 0000:03:00.0: irq 11, io mem 0x3c000000
Aug 3 11:41:46 laptop usb usb5: configuration #1 chosen from 1 choice
Aug 3 11:41:46 laptop hub 5-0:1.0: USB hub found
Aug 3 11:41:46 laptop hub 5-0:1.0: 3 ports detected
Aug 3 11:41:46 laptop PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
Aug 3 11:41:46 laptop ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Aug 3 11:41:46 laptop ehci_hcd 0000:03:00.1: EHCI Host Controller
Aug 3 11:41:46 laptop ehci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 6
Aug 3 11:41:46 laptop ehci_hcd 0000:03:00.1: irq 11, io mem 0x3c001000
Aug 3 11:41:46 laptop ehci_hcd 0000:03:00.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 3 11:41:46 laptop usb usb6: configuration #1 chosen from 1 choice
Aug 3 11:41:46 laptop hub 6-0:1.0: USB hub found
Aug 3 11:41:46 laptop hub 6-0:1.0: 3 ports detected
Aug 3 11:41:49 laptop usb 5-1: new full speed USB device using ohci_hcd and address 2
Aug 3 11:41:49 laptop usb 5-1: configuration #1 chosen from 1 choice
Aug 3 11:41:49 laptop usbserial_generic 5-1:1.0: GSM modem (1-port) converter detected
Aug 3 11:41:49 laptop usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 |
I tried it with kppp and gnome-ppp.
But it's not possible to establish a connection to the card.
I use gentoo-sources-2.6.20-r8.
kppp works fine for phones like Nokia N73 (per bluetooth and cable) and SE P990i (per bluetooth and cable)
Last edited by tuxian on Thu Aug 23, 2007 6:18 pm; edited 1 time in total |
|
| Back to top |
|
 |
schally
Apprentice
Joined: 13 May 2004
Posts: 207
|
| Posted: Fri Aug 03, 2007 2:12 pm Post subject: |
|
|
schreibt leicht kana mid µ/4er? 
_________________
Our glory is not in never falling but in rising again every time we fall -Konfuzius
greetz
- schally |
|
| Back to top |
|
|
tuxian
l33t
Joined: 26 Jan 2004
Posts: 766
Location: Austria
|
| Posted: Fri Aug 03, 2007 4:09 pm Post subject: |
|
|
 Was meinst du? |
|
| Back to top |
|
|
schally
Apprentice
Joined: 13 May 2004
Posts: 207
|
| Posted: Fri Aug 03, 2007 5:08 pm Post subject: |
|
|
schreibt leicht kana mid am mühlviertler,...??
_________________
Our glory is not in never falling but in rising again every time we fall -Konfuzius
greetz
- schally |
|
| Back to top |
|
|
tuxian
l33t
Joined: 26 Jan 2004
Posts: 766
Location: Austria
|
|
| Back to top |
|
|
schally
Apprentice
Joined: 13 May 2004
Posts: 207
|
| Posted: Mon Aug 06, 2007 7:52 am Post subject: |
|
|
ups,... mein fehler,... sry
Das die neu ist kann ich mir vorstellen weil ich noch nicht einmal davon gehört habe!
_________________
Our glory is not in never falling but in rising again every time we fall -Konfuzius
greetz
- schally |
|
| Back to top |
|
|
tuxian
l33t
Joined: 26 Jan 2004
Posts: 766
Location: Austria
|
| Posted: Tue Aug 07, 2007 9:26 pm Post subject: |
|
|
| push |
|
| Back to top |
|
|
tuxian
l33t
Joined: 26 Jan 2004
Posts: 766
Location: Austria
|
| Posted: Thu Aug 23, 2007 6:54 pm Post subject: |
|
|
It works now.
I didn't changed anything. I only upgraded the kernel to 2.6.22-gentoo-r2.
It works with kppp and wvdial.
USB serial kernel config section:
| Code: | # USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set |
| Code: | root@laptop: pts/2: 68 files 207Mb -> cat /etc/wvdial.conf
[Dialer Defaults]
Stupid Mode = 1
Modem = /dev/ttyUSB0
Modem Type = Analog Modem
Dial Command = ATDT
ISDN = 0
Baud = 921600
Phone = *99#
Username = ppp@A1plus.at
Password = ppp
[Dialer PIN]
Init1 = AT+CPIN=7987
[Dialer PINOFF]
Init1 = AT+CLCK="SC",0,"xxxx"
[Dialer PINON]
Init1 = AT+CLCK="SC",1,"xxxx"
[Dialer 3G]
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 |
Index of /etc/udev/rules.d/50-huawei-e870.rules:
| Code: | | SUBSYSTEM=="usb", SYSFS{idProduct}=="1003", SYSFS{idVendor}=="12d1", RUN+="/sbin/modprobe usbserial vendor=0x12d1 product=0x1003 |
There is only one problem remaining, under windows the download speed is 1.200kbit/sec and under linux only about 500kbit/sec. |
|
| Back to top |
|
|
|
Networking & Security
