| View previous topic :: View next topic |
| Author |
Message |
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
 Posted: Sat Aug 04, 2007 2:45 pm Post subject: [kerneldowngrade] bootet nicht nach kernelupdate |
 |
|
So nu da mein Platzproblem soweit "gestillt" ist hab ich beim neuhochfahren ein anderes,
Ich hab mir auch dann noch nen neuen Kernel gemacht und der funzt halt nich so wie er soll.
| Code: |
>>Loading modules
[rausgenommen]
:: Scanning for sym53c8xx...symc53c8xx loaded
:: Scanning for scsy_transport_fc...scsi_transport_fc loaded
>> Activating mdev
>> Determining root device
!! Block device /dev/sda2 is not a valid root device...
!! The root block device is unspecified or not detected.
|
Meine Kernel-Config in dem Bereich häng ich noch drann.
Und ja es ist ein Scsi-Device.
Edith:
Hier der versprochene Kernel-Configteil
Link gefixt
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2)
Last edited by Max Steel on Sun Aug 05, 2007 12:46 pm; edited 4 times in total |
|
| Back to top |
|
 |
nikaya
Veteran
Joined: 13 May 2006
Posts: 1471
Location: Germany
|
| Posted: Sat Aug 04, 2007 3:03 pm Post subject: Re: bootet nicht - weiß nich was ich Kernelmäßig vergesse |
|
|
| Code: | Objekt nicht gefunden!
Der angeforderte URL konnte auf dem Server nicht gefunden werden. Der Link auf der verweisenden Seite scheint falsch oder nicht mehr aktuell zu sein. Bitte informieren Sie den Autor dieser Seite über den Fehler. |
_________________
Notes on Dhamma
How to waste your time: look for an explanation of consciousness, ask to know what feeling is. (Nanavira Thera) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 3:04 pm Post subject: |
|
|
link gefixt
Ich hab ne initrd die die benötigten Kernelmodule lädt.
Ich nutze neuerdings gentoo-sources 2.6.21-r4
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
nikaya
Veteran
Joined: 13 May 2006
Posts: 1471
Location: Germany
|
| Posted: Sat Aug 04, 2007 3:50 pm Post subject: |
|
|
scsi is imho deprecated und sollte durch sata ersetzt bzw. ergänzt werden.
| Code: |
Device Drivers -> Serial ATA (prod) and Parallel ATA (experimental) drivers ---><*> ATA device support---><*> VIA SATA support |
Was sagt denn | Code: | | grep -i sata /usr/src/linux/.config |
_________________
Notes on Dhamma
How to waste your time: look for an explanation of consciousness, ask to know what feeling is. (Nanavira Thera) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 4:44 pm Post subject: |
|
|
Bitteschön
grep -i sata /usr/src/linux/.config
| Code: | # CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_ACPI=y
|
Nu hab ich den SATA dingens aktiviert.
| Code: |
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_ACPI=y
|
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
nikaya
Veteran
Joined: 13 May 2006
Posts: 1471
Location: Germany
|
| Posted: Sat Aug 04, 2007 5:11 pm Post subject: |
|
|
| Code: | | CONFIG_BLK_DEV_IDE_SATA is not set |
imho muß das aktiviert sein.Ich bewege mich aber auf dünnem Eis da ich das Problem nur vom lesen im Forum kenne und selber kein scsi/sata habe.
Vielleicht kann da jemand kompetenterer mehr zu sagen. 
_________________
Notes on Dhamma
How to waste your time: look for an explanation of consciousness, ask to know what feeling is. (Nanavira Thera) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 5:35 pm Post subject: |
|
|
Hmm okay, werd ich auch noch machen, und dan kontrollieren,
auf alle Fälle sach ich mal danke.
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 5:53 pm Post subject: |
|
|
Nen geht immer noch nicht
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 6:40 pm Post subject: |
|
|
HAt keiner eine Idee mehr?
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
saturday
Apprentice
Joined: 20 Dec 2004
Posts: 246
Location: de/munich/home
|
| Posted: Sat Aug 04, 2007 8:04 pm Post subject: |
|
|
| Was ist denn für ein Chipsatz verbaut? (Hilft dir da evtl. lspci weiter?) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 8:07 pm Post subject: |
|
|
Also, hier mal ein paar Zusatzinfos:
lspci
| Code: |
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0f.0 VGA compatible controller: VMware Inc [VMware SVGA II] PCI Display Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
00:12.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
|
dmesg | grep scsi
| Code: | scsi0 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=17
scsi 0:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
sd 0:0:1:0: Attached scsi disk sdb
scsi 0:0:2:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
sd 0:0:2:0: Attached scsi disk sdc
|
lsmod
| Code: | Module Size Used by
sworks_agp 13472 0
nvidia_agp 12316 0
ati_agp 13068 0
amd64_agp 16772 0
ali_agp 11136 0
dm_mod 60440 0
ipv6 279616 14
af_packet 29960 0
snd_ens1371 28960 1
gameport 19848 1 snd_ens1371
snd_rawmidi 28064 1 snd_ens1371
parport_pc 43492 0
snd_seq_device 12044 1 snd_rawmidi
snd_ac97_codec 97188 1 snd_ens1371
snd_ac97_bus 6528 1 snd_ac97_codec
snd_pcm_oss 45728 0
snd_mixer_oss 20224 1 snd_pcm_oss
snd_pcm 80004 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
8250_pnp 13440 0
8250 28164 1 8250_pnp
serial_core 25216 1 8250
parport 40008 1 parport_pc
snd_timer 26500 1 snd_pcm
snd 55396 10 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12512 1 snd
snd_page_alloc 13960 1 snd_pcm
shpchp 41380 0
pcnet32 36740 0
mii 9728 1 pcnet32
mptspi 20744 9
mptscsih 27392 1 mptspi
mptbase 54880 2 mptspi,mptscsih
i2c_piix4 12684 0
pci_hotplug 36424 1 shpchp
intel_agp 27420 1
agpgart 36044 6 sworks_agp,nvidia_agp,ati_agp,amd64_agp,ali_agp,intel_agp
tsdev 11840 0
evdev 14208 1
pcmcia 41132 0
firmware_class 14208 1 pcmcia
yenta_socket 30220 0
rsrc_nonstatic 17408 1 yenta_socket
pcmcia_core 43800 3 pcmcia,yenta_socket,rsrc_nonstatic
cpufreq_ondemand 12300 0
speedstep_lib 8836 0
freq_table 9088 1 cpufreq_ondemand
video 19460 0
thermal 17928 0
sbs 18856 0
processor 36200 1 thermal
i2c_ec 9216 1 sbs
i2c_core 25984 2 i2c_piix4,i2c_ec
fan 8836 0
container 8576 0
button 10768 0
battery 14084 0
ac 9348 0
aufs 88244 1
cloop 18208 1
sbp2 28292 0
ohci1394 38960 0
ieee1394 300760 2 sbp2,ohci1394
usb_storage 73408 0
usbhid 56928 0
ff_memless 9992 1 usbhid
libusual 20624 1 usb_storage
ohci_hcd 24580 0
uhci_hcd 27788 0
ehci_hcd 35848 0
usbcore 135812 7 usb_storage,usbhid,libusual,ohci_hcd,uhci_hcd,ehci_hcd
|
Alle Befehle unter Knoppix ausgeführt
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
saturday
Apprentice
Joined: 20 Dec 2004
Posts: 246
Location: de/munich/home
|
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sat Aug 04, 2007 9:49 pm Post subject: |
|
|
So jetz hab ich ein Kerneldowngrade gemacht, aber naja, ich weiß nich was ich fürn Fehler gemacht hab.
normales System:
lsmod
| Code: | Module Size Used by
snd_seq_midi 6048 0
snd_pcm_oss 34080 0
snd_mixer_oss 13504 1 snd_pcm_oss
snd_seq_oss 25152 0
snd_seq_midi_event 4544 2 snd_seq_midi,snd_seq_oss
snd_seq 37328 5 snd_seq_midi,snd_seq_oss,snd_seq_midi_event
nfsd 79528 13
exportfs 4672 1 nfsd
vmhgfs 37328 4
snd_ens1371 16576 1
snd_rawmidi 16416 2 snd_seq_midi,snd_ens1371
snd_seq_device 5260 4 snd_seq_midi,snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec 73760 1 snd_ens1371
ac97_bus 1664 1 snd_ac97_codec
snd_pcm 50628 3 snd_pcm_oss,snd_ens1371,snd_ac97_codec
snd_timer 16324 2 snd_seq,snd_pcm
snd 33764 12 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 6856 1 snd_pcm
pcspkr 2304 0
vmxnet 9856 0
pcnet32 26564 0
mii 3712 1 pcnet32
i2c_piix4 6604 0
i2c_core 13056 1 i2c_piix4
mousedev 8996 1
mptsas 21512 0
scsi_transport_sas 17344 1 mptsas
mptfc 12420 0
scsi_transport_fc 24644 1 mptfc
mptspi 12808 9
mptscsih 16512 3 mptsas,mptfc,mptspi
mptbase 41504 4 mptsas,mptfc,mptspi,mptscsih
sym53c8xx 64532 0
scsi_transport_spi 16064 2 mptspi,sym53c8xx
sg 25564 0
nfs 103356 1
lockd 50952 3 nfsd,nfs
sunrpc 119164 10 nfsd,nfs,lockd
dm_mod 42636 0
sbp2 18180 0
ohci1394 30576 0
ieee1394 66872 2 sbp2,ohci1394
usbhid 20768 0
ohci_hcd 17284 0
uhci_hcd 19852 0
usb_storage 25796 0
ehci_hcd 25740 0
usbcore 95688 6 usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
|
So.
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
nikaya
Veteran
Joined: 13 May 2006
Posts: 1471
Location: Germany
|
| Posted: Sun Aug 05, 2007 12:00 pm Post subject: |
|
|
Hast Du vielleicht eine /boot Partition mit ext2?
_________________
Notes on Dhamma
How to waste your time: look for an explanation of consciousness, ask to know what feeling is. (Nanavira Thera) |
|
| Back to top |
|
|
Max Steel
Advocate
Joined: 12 Feb 2007
Posts: 2236
Location: My own world! I and Gentoo!
|
| Posted: Sun Aug 05, 2007 12:27 pm Post subject: |
|
|
Na fast mit ext3, warum?
/dev/sda1 ext3 /boot
/dev/sda2 reiserfs /
/dev/sdc2 reiserfs /usr
/dev/sda4 rieserfs /usr/portage
/dev/sdb2 reiserfs /var
/dev/sdc3 reiserfs /vol1
cat /boot/grub/grub.conf
| Code: | default 0
timeout 8
splashimage=(hd0,0)/grub/splash.xpm.gz
title=Gentoo Linux
root (hd0,0)
kernel /kernel root=/dev/ram0 ramdisk=8192 real_root=/dev/sda2 doscsi
initrd /initramfs |
Und ja der Symlink menu.lst > grub.conf ist da.
ls -la /boot
| Code: | lrwxrwxrwx 1 root root 1 2. Feb 2007 boot -> .
drwxr-xr-x 2 root root 1024 4. Aug 20:36 grub
drwx------ 2 root root 12288 2. Feb 2007 lost+found
lrwxrwxrwx 1 root root 23 4. Aug 23:22 .config -> config-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 41940 31. Jul 00:40 config-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 39500 4. Aug 22:20 config-2.6.21-gentoo-r4
lrwxrwxrwx 1 root root 26 4. Aug 23:22 initramfs -> initramfs-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 1455718 4. Aug 23:25 initramfs-2.6.20-gentoo-r7
lrwxrwxrwx 1 root root 23 4. Aug 23:22 kernel -> kernel-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 1590968 31. Jul 16:02 kernel-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 1668632 4. Aug 22:38 kernel-2.6.21-gentoo-r4
lrwxrwxrwx 1 root root 27 4. Aug 23:22 System.map -> System.map-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 778129 31. Jul 16:02 System.map-2.6.20-gentoo-r7
-rw-r--r-- 1 root root 814591 4. Aug 22:38 System.map-2.6.21-gentoo-r4
|
_________________
mfg
Steel
___________________
Heim-PC: AMD Ryzen 5950X, 64GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-1145G7, 16GB RAM, Intel Iris Xe Graphic (leider WSL2) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
