Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
X not starting up with configured (and supported) mode
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Chriske
Tux's lil' helper
Tux's lil' helper


Joined: 09 Apr 2004
Posts: 86
Location: Belgium (Antwerp)

PostPosted: Thu Aug 16, 2007 12:11 am    Post subject: X not starting up with configured (and supported) mode Reply with quote

I've configured X-servers before and never had much problems. I don't know a lot about it, however.

With my new PC, i can't get X started with the screen resolution i want.

This is my xorg.conf:
Code:
Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Philips"
        ModelName    "Brilliance 201B"
        Option          "DPMS"
        HorizSync       30-107
        VertRefresh     65-160
        ModeLine        "1280x960" 148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "82945G/GZ Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth    24
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes   "1280x960"
        EndSubSection
EndSection


As you can see i want 1280x960 as resolution. But when i start x with this config, it displays 1024x768. The log file:
Code:

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux pcswa 2.6.22-gentoo-r2 #69 PREEMPT Fri Aug 17 00:39:51 CEST 2007 i686
Build Date: 16 August 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 17 01:36:25 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
        Entry deleted from font path.
(**) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81f4540
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.2
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2770 card 1458,5000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2772 card 1458,d000 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1b:0: chip 8086,27d8 card 1458,a002 rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1458,5004 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1458,5004 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1458,5004 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1458,5004 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1458,5006 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b8 card 1458,5001 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c0 card 1458,b002 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1458,5001 rev 01 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 10ec,8168 card 1458,e000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 1 I/O range:
        [0] -1  0       0x00009000 - 0x000090ff (0x100) IX[B]
        [1] -1  0       0x00009400 - 0x000094ff (0x100) IX[B]
        [2] -1  0       0x00009800 - 0x000098ff (0x100) IX[B]
        [3] -1  0       0x00009c00 - 0x00009cff (0x100) IX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:1), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1  0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [1] -1  0       0x0000a400 - 0x0000a4ff (0x100) IX[B]
        [2] -1  0       0x0000a800 - 0x0000a8ff (0x100) IX[B]
        [3] -1  0       0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
        [0] -1  0       0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
        [0] -1  0       0x40000000 - 0x400fffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
        [0] -1  0       0x00008000 - 0x000080ff (0x100) IX[B]
        [1] -1  0       0x00008400 - 0x000084ff (0x100) IX[B]
        [2] -1  0       0x00008800 - 0x000088ff (0x100) IX[B]
        [3] -1  0       0x00008c00 - 0x00008cff (0x100) IX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xe2000000/19, 0xd0000000/28, 0xe2080000/18, I/O @ 0xb000/3
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [1] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [2] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [3] -1  0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [4] -1  0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [5] -1  0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [6] -1  0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [7] -1  0       0x00000500 - 0x0000051f (0x20) IX[B]
        [8] -1  0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [9] -1  0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [10] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [11] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [12] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [13] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [14] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [15] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [16] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [17] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [1] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [2] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [3] -1  0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [4] -1  0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [5] -1  0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [6] -1  0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [7] -1  0       0x00000500 - 0x0000051f (0x20) IX[B]
        [8] -1  0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [9] -1  0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [10] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [11] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [12] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [13] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [14] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [15] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [16] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [17] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [5] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [6] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [7] -1  0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [8] -1  0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [9] -1  0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [10] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [13] -1 0       0x00000500 - 0x0000051f (0x20) IX[B]
        [14] -1 0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [15] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [16] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [17] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [18] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [19] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [20] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [21] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [22] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [23] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.3.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 2.1.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
        965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Chipset 945G found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [5] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [6] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [7] -1  0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [8] -1  0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [9] -1  0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [10] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [13] -1 0       0x00000500 - 0x0000051f (0x20) IX[B]
        [14] -1 0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [15] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [16] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [17] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [18] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [19] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [20] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [21] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [22] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [23] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
(II) resource ranges after probing:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [5] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [6] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [7] -1  0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [8] -1  0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [9] -1  0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [10] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [11] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [12] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [13] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [14] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [15] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [16] -1 0       0x00000500 - 0x0000051f (0x20) IX[B]
        [17] -1 0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [18] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [19] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [20] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [21] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [23] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [24] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [25] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [26] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
        [27] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [28] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xE2000000
(WW) System lacks support for changing MTRRs
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
        for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output VGA connected
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1792x1344"x75.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
(II) intel(0): Modeline "1600x1200"x85.0  229.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (106.2 kHz)
(II) intel(0): Modeline "1600x1200"x75.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz)
(II) intel(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
(II) intel(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xe2080000 - 0xe20bffff (0x40000) MS[B]
        [1] 0   0       0xd0000000 - 0xdfffffff (0x10000000) MS[B]
        [2] 0   0       0xe2000000 - 0xe207ffff (0x80000) MS[B]
        [3] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [4] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [5] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [6] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [7] -1  0       0xe1000000 - 0xe1000fff (0x1000) MX[B]
        [8] -1  0       0xe20c4000 - 0xe20c43ff (0x400) MX[B]
        [9] -1  0       0xe20c0000 - 0xe20c3fff (0x4000) MX[B]
        [10] -1 0       0xe2080000 - 0xe20bffff (0x40000) MX[B](B)
        [11] -1 0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [12] -1 0       0xe2000000 - 0xe207ffff (0x80000) MX[B](B)
        [13] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [14] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [15] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [16] 0  0       0x0000b000 - 0x0000b007 (0x8) IS[B]
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [18] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [19] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [20] -1 0       0x00000500 - 0x0000051f (0x20) IX[B]
        [21] -1 0       0x0000f000 - 0x0000f00f (0x10) IX[B]
        [22] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [23] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [24] -1 0       0x000001f0 - 0x000001f0 (0x1) IX[B]
        [25] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [26] -1 0       0x0000c000 - 0x0000c01f (0x20) IX[B]
        [27] -1 0       0x0000bc00 - 0x0000bc1f (0x20) IX[B]
        [28] -1 0       0x0000b800 - 0x0000b81f (0x20) IX[B]
        [29] -1 0       0x0000b400 - 0x0000b41f (0x20) IX[B]
        [30] -1 0       0x0000b000 - 0x0000b007 (0x8) IX[B](B)
        [31] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [32] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
               large DRI memory manager reservation:
(II) intel(0): Allocating 6396 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1792 -> 2048).
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x3f820000 physical)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB, 0x3f832000 physical)
(II) intel(0): 0x00040000-0x04037fff: front buffer (65504 kB)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x04038000-0x04047fff: xaa scratch (64 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (14336 kB)
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (14336 kB)
(II) intel(0): 0x07000000-0x08ffffff: DRI memory manager (32768 kB)
(II) intel(0): 0x09000000-0x0affffff: textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [drm] DRM interface version 1.3
(II) intel(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) intel(0): [drm] added 8192 byte SAREA at 0xf887d000
(II) intel(0): [drm] mapped SAREA 0xf887d000 to 0xb7e0c000
(II) intel(0): [drm] framebuffer handle = 0xd0040000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xe2000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] init sarea width,height = 1792 x 1792 (pitch 2048)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x2a008000
(II) intel(0): [drm] Back Buffer = 0xd5000000
(II) intel(0): [drm] Depth Buffer = 0xd6000000
(II) intel(0): [drm] textures = 0xd9000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04038000 (pgoffset 16440)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x09000000 (pgoffset 36864)
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 5
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
(II) Mouse autoprobe: Disabling secondary wheel


So as far as i understand, the vertical refresh rate is out of range:
Code:
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
But what confuses me, is that in the probed modes, 1280x960 is listed, with a refresh rate well in the rang i defined:
Code:
(II) intel(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)


Furthermore, when X is started, i can change the mode with xrandr without any problem:
Code:
pcswa ~ # xrandr -s 1280x960
pcswa ~ # xrandr
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 1792 x 1792
VGA connected 1280x960+0+0 (normal left inverted right) 0mm x 0mm
   1792x1344      75.0
   1600x1200      85.0     75.0     70.0     65.0
   1400x1050      74.8
   1280x1024      85.0     75.0
   1280x960       85.0*
   1152x864       75.0
   1024x768       85.0     75.0     70.1
   832x624        74.6
   800x600        85.1     72.2     75.0
   640x480        85.0     72.8     75.0
   720x400        85.0
   640x400        85.1
   640x350        85.1
pcswa ~ #     


So my question is: why, if i can change my display mode to 1280x960 when X is started, does X not use the mode 1280x960 at startup?

Thanks.
_________________
In a world without fences and walls, who needs Gates and Windows?
Back to top
View user's profile Send private message
didymos
Advocate
Advocate


Joined: 10 Oct 2005
Posts: 4798
Location: California

PostPosted: Thu Aug 16, 2007 3:17 am    Post subject: Reply with quote

OK, have you tried removing the ModeLine from xorg.conf?
_________________
Thomas S. Howard
Back to top
View user's profile Send private message
Chriske
Tux's lil' helper
Tux's lil' helper


Joined: 09 Apr 2004
Posts: 86
Location: Belgium (Antwerp)

PostPosted: Thu Aug 16, 2007 8:46 am    Post subject: Reply with quote

Yeps.

Actually, i first tried without it. But when i saw the logfile, i added it, to see if it would make a difference, which it appearantly doesn't. :-)
_________________
In a world without fences and walls, who needs Gates and Windows?
Back to top
View user's profile Send private message
didymos
Advocate
Advocate


Joined: 10 Oct 2005
Posts: 4798
Location: California

PostPosted: Thu Aug 16, 2007 8:57 am    Post subject: Reply with quote

Hmm. Well if this were Windows, I'd just tell you do it, like, 5 more times, and then it would work. What about commenting out HorizSync and VertRefresh? Does X correctly deduce the ranges?
_________________
Thomas S. Howard
Back to top
View user's profile Send private message
Chriske
Tux's lil' helper
Tux's lil' helper


Joined: 09 Apr 2004
Posts: 86
Location: Belgium (Antwerp)

PostPosted: Fri Aug 17, 2007 1:31 am    Post subject: Reply with quote

Without HorizSync and Vertrefresh, it only detects 3 available modes, and not the ones i want.

Now i've tried with VertRefresh 10-800 (to avoid out of range), and what happens is very strange:
Code:
(II) intel(0): EDID for output VGA
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
(II) intel(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz)
(II) intel(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz)
(II) intel(0): Modeline "1792x1344"x75.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
(II) intel(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz)
(II) intel(0): Modeline "1600x1200"x85.0  229.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (106.2 kHz)
(II) intel(0): Modeline "1600x1200"x75.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz)
(II) intel(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1600x1024"x60.0  106.91  1600 1620 1640 1670  1024 1027 1030 1067 -hsync -vsync (64.0 kHz)
(II) intel(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
(II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(II) intel(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x768"x54.8   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync (44.2 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1152x768

The mode is no longer listed as unavailable due to 'vrefresh out of range' (which is logical), it is still listed in the probed modes, but still doesn't get selected.
As the log indicates, it starts up with 1152x768. Which is already better than 1024x768, but still not quite what i want.

Anyone an idea why he still refuses to select the 1280x960? I'm lost here...
_________________
In a world without fences and walls, who needs Gates and Windows?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum