bobber205 Guru
Joined: 23 Aug 2006 Posts: 561 Location: Oregon
|
Posted: Fri Aug 24, 2007 12:57 am Post subject: 7600 Acer20"W LCD and X11 = Not the Best of Friends |
|
|
I have compiled xorg-server with VIDEO_CARDS="nvidia" in my make.conf file.
Below is both my error log file for xorg and my xorg.conf
I have no idea what to do. Thanks for any help!
EDIT:
Now it seems all I need to know how to do it make xorg use CRT-1 instead of my CRT-0 port on my video card.
I tried using the "Standard VGA" drivers and I got kde to come up albeit ugly as all out.
Hour 9: I've discovered that if I add Screen 1 or Screen 0 to my config file where my vid card is, when I try to startx it says "screen 0 deleted because of no matching config section"
Code: |
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "ACER"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 31.5 - 64.3
HorizSync 30-35
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 60
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "7600gt"
Driver "nvidia"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "7600gt"
Monitor "ACER"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "800x600" "640x400"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection |
Code: |
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.6.22-gentoo-r2 i686
Current Operating System: Linux gentoo 2.6.22-gentoo-r2 #5 SMP Wed Aug 22 19:55:39 GMT 2007 i686
Build Date: 23 August 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 23 17:23:49 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "ACER"
(**) | |-->Device "7600gt"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2970 card 8086,5354 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2971 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 8086,a201 rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 8086,5354 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 8086,5354 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 8086,5354 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 8086,5354 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 8086,5354 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b8 card 8086,5354 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 8086,5354 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c0 card 8086,5354 rev 01 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 8086,5354 rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0391 card 3842,c615 rev a1 class 03,00,00 hdr 00
(II) PCI: 05:08:0: chip 8086,1094 card 8086,0001 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0018 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x90000000 - 0x91ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x92200000 - 0x922fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0x92300000 - 0x923fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:3), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0x92400000 - 0x924fffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[3] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0x92000000 - 0x920fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7600 GT] rev 161, Mem @ 0x91000000/24, 0x80000000/28, 0x90000000/24, I/O @ 0x2000/7, BIOS @ 0xfffe0000/0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[1] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[2] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[3] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[4] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[5] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[6] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[7] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[8] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[9] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[10] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[11] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[12] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[13] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[14] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[15] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[21] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[22] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[23] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[24] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[1] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[2] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[3] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[4] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[5] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[6] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[7] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[8] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[9] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[10] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[11] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[12] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[13] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[14] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[15] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[21] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[22] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[23] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[24] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[5] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[6] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[7] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[8] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[9] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[10] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[11] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[15] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[16] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[17] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[18] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[19] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[20] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[21] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[27] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[28] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[29] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[30] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 100.14.09 Sat May 26 01:22:44 PDT 2007
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) NVIDIA dlloader X Driver 100.14.09 Sat May 26 00:49:01 PDT 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/extensions//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[5] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[6] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[7] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[8] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[9] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[10] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[11] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[15] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[16] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[17] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[18] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[19] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[20] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[21] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[27] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[28] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[29] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[30] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[5] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[6] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[7] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[8] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[9] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[10] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[11] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[18] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[19] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[20] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[21] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[22] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[23] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[24] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[29] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[30] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[31] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[32] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[33] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GT (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.51.05
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): Acer AL2016W (CRT-1)
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Acer AL2016W (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x1024"; removing.
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x90ffffff (0x1000000) MX[B]
[1] 0 0 0x80000000 - 0x8fffffff (0x10000000) MX[B]
[2] 0 0 0x91000000 - 0x91ffffff (0x1000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0x92000000 - 0x92000fff (0x1000) MX[B]
[8] -1 0 0x92104000 - 0x921043ff (0x400) MX[B]
[9] -1 0 0x92104400 - 0x921047ff (0x400) MX[B]
[10] -1 0 0x92100000 - 0x92103fff (0x4000) MX[B]
[11] -1 0 0xfffe0000 - 0xfffe0000 (0x1) MX[B](B)
[12] -1 0 0x90000000 - 0x90ffffff (0x1000000) MX[B](B)
[13] -1 0 0x80000000 - 0x8fffffff (0x10000000) MX[B](B)
[14] -1 0 0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[18] 0 0 0x00002000 - 0x0000207f (0x80) IX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]
[22] -1 0 0x00003000 - 0x0000301f (0x20) IX[B]
[23] -1 0 0x000030a0 - 0x000030af (0x10) IX[B]
[24] -1 0 0x000030e0 - 0x000030e3 (0x4) IX[B]
[25] -1 0 0x000030c0 - 0x000030c7 (0x8) IX[B]
[26] -1 0 0x000030e4 - 0x000030e7 (0x4) IX[B]
[27] -1 0 0x000030c8 - 0x000030cf (0x8) IX[B]
[28] -1 0 0x000030b0 - 0x000030bf (0x10) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[33] -1 0 0x00003020 - 0x0000303f (0x20) IX[B]
[34] -1 0 0x00003040 - 0x0000305f (0x20) IX[B]
[35] -1 0 0x00003060 - 0x0000307f (0x20) IX[B]
[36] -1 0 0x00003080 - 0x0000309f (0x20) IX[B]
[37] -1 0 0x00002000 - 0x0000207f (0x80) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "640x480"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing. |
|
|