usb mouse, usbpen

[mimo]

hey all

I'm having problems with[/b] my usb mouse after er compiled support for my usbpen in to my kernel. I compiled this settings in

Usb Support

[*] Preliminary USB device filesystem
<*> OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support
<*> USB Mass Storage support

SCSI Support

<*> SCSI disk support
<*> SCSI generic support

And that did make my usbpen work.. but after that, have my mouse not worked.

I'm running with kernerl version 2.4.20-gentoo-r2.
I have disconnected my usbpen, and it still dont work, but it do find my under /proc/bus/usb/devcies

mimo linux # cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=e2817000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=e2815000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c002 Rev= 1.10
S: Manufacturer=Logitech
S: Product=USB-PS/2 Mouse M-BA47
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
mimo linux #

its all so finds it under my demsg

mimo linux # dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe2815000, IRQ 10
usb-ohci.c: usb-00:0f.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
usb-ohci.c: USB OHCI at membase 0xe2817000, IRQ 11
usb-ohci.c: usb-00:14.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: registered new driver hid
usb.c: registered new driver usb-storage
input0: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on usb1:2.0
mimo linux #[/b]

so if anyone have a sulution to this problem.. I would be realy happy

//mimo

[Sir Al]

What if you disconnect the mouse?
_________________
Athlon XP 2000+ Palomino @ 1.667ghz
Asus A7V333 Revision 1.02 w/ Promise RAID
512mb PC2700-1.5-2-2.0 @ 333mhz
MSI Geforce4 Ti4200-TD 250/446 mhz
MSI TV@nywhere TV Tuner
Antec SX1040BII Case + SL400 400W PSU
Logitech Z-540 4.1 Speakers