| View previous topic :: View next topic |
| Author |
Message |
reksav
Apprentice
Joined: 09 Mar 2005
Posts: 165
Location: rochester, ny
|
 Posted: Sat Sep 29, 2007 10:45 pm Post subject: dual screen and beryl... |
 |
|
well this might get complicated so sorry in advance if it makes no sense... at the moment i have a dual screen setup (monitor and tv across the room) for some reason i cant drag anything to the tv and when i move my mouse over to it, it wont let the mouse come back, this is both with and without beryl running. the configuration im looking for is so that i can have a movie playing on the tv and still have the monitor useable. but id like to see whats on the tv from the monitor, yano like setup the monitor as 1 workspace and have the tv the other or something to that effect. reason being i dont want to play 'the mouse game' of someone sitting on the other side of the room where i cant see the tv yelling "little bit to the left, nono the other left, ok click" and someone on the mouse being aggrivated. also id like this to work with beryl so that i could rotate between the tv and the monitor... any ideas? hope that wasnt too confusing 
heres my xorg, whys the tv steal my mouse?!
| Code: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC FE700+"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
Option "AddARGBGLXVisuals" "true"
Screen 0
BusID "PCI:2:0:0"
Option "RenderAccel" "true"
Option "TripleBuffer" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
Option "AddARGBGLXVisuals" "true"
Screen 1
BusID "PCI:2:0:0"
Option "RenderAccel" "true"
Option "TripleBuffer" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1280x1024 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection |
|
|
| Back to top |
|
 |
blubbi
Guru
Joined: 27 Apr 2003
Posts: 564
Location: Halle (Saale), Germany
|
| Posted: Sun Sep 30, 2007 12:22 am Post subject: |
|
|
How is your TV connected?
Anyway, here's my Dual-Monitor Setup with TwinView works like a charm with compiz-fusion (http://omploader.org/vNG90)
Maybe it helps:
| Code: | Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
# Load "v4l"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "blank time" "1"
Option "standby time" "2"
Option "suspend time" "3"
Option "off time" "4"
# SELECT YOUR PREFERRED LAYOUT HERE
Option "DefaultServerLayout" "twinview"
EndSection
Section "InputDevice"
Identifier "DiNovoEDGE"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbVariant" "nodeadkeys"
Option "XkbModel" "logidmd"
Option "XkbLayout" "de"
EndSection
#Section "InputDevice"
# Identifier "DeskPro"
# Driver "kbd"
# Option "AutoRepeat" "500 30"
# Option "XkbVariant" "nodeadkeys"
# Option "XkbModel" "logidmd"
# Option "XkbLayout" "de"
#EndSection
Section "InputDevice"
Identifier "MXRevolution"
Driver "evdev"
Option "Protocol" "auto"
Option "Name" "Logitech USB Receiver" # cat /proc/bus/input/devices
Option "Phys" "usb-*/input0" # cat /proc/bus/input/devices
Option "HWHEELRelativeAxisButtons" "7 6"
# Option "Device" "/dev/input/mice" # (/dev/input/mice also appears to work)
# Option "Buttons" "12"
# Option "ZAxisMapping" "4 5"
# Option "Resolution" "1000"
# Option "Emulate3Buttons" "false"
EndSection
Section "InputDevice"
Identifier "MX1000"
Driver "mouse"
Option "Protocol" "auto"
Option "Name" "Logitech USB RECEIVER" # cat /proc/bus/input/devices
Option "Phys" "usb-*/input0" # cat /proc/bus/input/devices
Option "Device" "/dev/input/mice" # (/dev/input/mice also appears to work)
Option "Buttons" "12"
Option "ZAxisMapping" "4 5"
Option "HWHEELRelativeAxisButtons" "7 6"
Option "Resolution" "1000"
Option "Emulate3Buttons" "false"
EndSection
Section "InputDevice"
Identifier "TouchDisc"
Driver "mouse"
# Driver "synaptics"
# Option "Phys" "usb-*/input5" # cat /proc/bus/input/devices
# Option "SHMconfig" "on"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse1"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "IBM"
Option "dpms"
HorizSync 30.0-107.0
VertRefresh 48-170
DisplaySize 376 301
EndSection
Section "Monitor"
Identifier "IIYAMA"
Option "dpms"
HorizSync 27.0-115.0
VertRefresh 50-160
# DisplaySize 360 270
EndSection
Section "Monitor"
Identifier "TwinMoni"
Option "dpms"
HorizSync 30.0-81.0
VertRefresh 56-60
DisplaySize 752 301 #IBM horizontal size *2 to get 86*86 dpi
EndSection
# #----- Single BEGIN ------------------------------------------------------------------------------
# Section "ServerLayout"
# Identifier "single"
# Screen 0 "Screen0"
# InputDevice "MXRevolution" "CorePointer"
# InputDevice "TouchDisc" "SendCoreEvents"
# InputDevice "DiNovoEDGE" "CoreKeyboard"
# EndSection
# #----- Single END --------------------------------------------------------------------------------
#----- Twinview BEGIN ----------------------------------------------------------------------------
Section "Device"
Identifier "NvidiaTwin"
VendorName "Asus"
BoardName "EN-7600 GT"
Driver "nvidia"
# BusID "PCI:1:0:0"
Option "AddARGBGLXVisuals" "true"
Option "HWcursor"
Option "CursorShadow"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "3"
Option "NoLogo" "True"
Option "Coolbits" "1"
Option "TwinView"
# Option "DynamicTwinView"
Option "MetaModes" "1280x1024,1280x1024; 1280x1024; 1024x768,1024x768; 1024x768; 800x600,800x600; 800x600"
Option "TwinViewOrientation" "CRT-1 RightOf CRT-0"
Option "HorizSync" "CRT-0: 30-107; CRT-1: 27-115"
Option "VertRefresh" "CRT-0: 85; CRT-1: 85"
Option "ConnectedMonitor" "CRT-0,CRT-1"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "UseEdidDpi" "FALSE"
EndSection
Section "Screen"
Identifier "ScreenTwin"
Device "NvidiaTwin"
Monitor "IIYAMA"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "twinview"
Screen 0 "ScreenTwin"
InputDevice "MXRevolution" "CorePointer"
InputDevice "MX1000" "SendCoreEvents"
InputDevice "TouchDisc" "SendCoreEvents"
# InputDevice "DeskPro" "SendCoreEvents"
InputDevice "DiNovoEDGE" "CoreKeyboard"
Option "Xinerama" "0"
EndSection
#----- Twinview END ------------------------------------------------------------------------------
# #----- Xinerama BEGIN ----------------------------------------------------------------------------
# Section "Device"
# Identifier "Nvidia0"
# VendorName "Gainward"
# BoardName "Ultra/1960 Golden Sample"
# Driver "nvidia"
# # BusID "PCI:1:0:0"
# Screen 0
# Option "UseDisplayDevice" "DFP"
# Option "NoLogo" "1"
# Option "RenderAccel" "true"
# Option "AllowGLXWithComposite" "true"
# Option "UseEdidDpi" "FALSE"
# EndSection
#
# Section "Device"
# Identifier "Nvidia1"
# VendorName "Gainward"
# BoardName "Ultra/1960 Golden Sample"
# Driver "nvidia"
# # BusID "PCI:1:0:0"
# Screen 1
# Option "UseDisplayDevice" "CRT"
# Option "NoLogo" "1"
# Option "RenderAccel" "true"
# Option "AllowGLXWithComposite" "true"
# Option "UseEdidDpi" "FALSE"
# EndSection
#
# Section "Screen"
# Identifier "Screen0"
# Device "Nvidia0"
# Monitor "IBM"
# DefaultDepth 24
# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600"
# EndSubsection
# EndSection
#
# Section "Screen"
# Identifier "Screen1"
# Device "Nvidia1"
# Monitor "IIYAMA"
# DefaultDepth 24
# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600"
# EndSubsection
# EndSection
#
# Section "ServerLayout"
# Identifier "xinerama"
# Screen 0 "Screen0"
# Screen 1 "Screen1" RightOf "Screen0"
# InputDevice "MXRevolution" "CorePointer"
# InputDevice "TouchDisc" "SendCoreEvents"
# InputDevice "DiNovoEDGE" "CoreKeyboard"
# Option "Xinerama" "1"
# EndSection
# #----- Xinerama END ------------------------------------------------------------------------------ |
|
|
| Back to top |
|
|
reksav
Apprentice
Joined: 09 Mar 2005
Posts: 165
Location: rochester, ny
|
| Posted: Sun Sep 30, 2007 3:07 am Post subject: |
|
|
| thanks ill take a deep look at that in the morning. the tv is linked via a svideo cable |
|
| Back to top |
|
|
SiberianSniper
Guru
Joined: 06 Apr 2006
Posts: 378
Location: Dayton, OH, USA
|
| Posted: Mon Oct 01, 2007 12:33 am Post subject: |
|
|
I'm pretty sure it's an X.org 7.3 issue, as the same thing happens to me in fluxbox. I move the mouse to the second monitor and can't drag it back. Plus the new X.org has destroyed menu transparency in flux  Yeah, I have nothing good to say about 7.3 and it's a pain in the butt to downgrade back to a working version. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
