| View previous topic :: View next topic |
| Author |
Message |
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
 Posted: Fri Oct 05, 2007 12:24 pm Post subject: Error with lm_sensors [solved] |
 |
|
hi all!
i recently booted to kernel 2.6.22-gentoo-r8. before building this new kernel i copied the old .config to the new directory and made a "make oldconfig". now after using "sensors" in the command line i get this output:
| Code: |
area52 ~ # sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+24 C
Core1 Temp:
+32 C
it8716-i2c-9191-290
ERROR: Can't get adapter or algorithm?!?
VCore: +1.02 V (min = +0.00 V, max = +4.08 V)
VDDR: +3.23 V (min = +0.00 V, max = +4.08 V)
in2: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
+5V: +4.73 V (min = +0.00 V, max = +6.85 V)
+12V: +11.52 V (min = +0.00 V, max = +16.32 V)
in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
5VSB: +4.68 V (min = +0.00 V, max = +6.85 V)
VBat: +2.96 V
CPU Fan: 1610 RPM (min = 0 RPM)
Case Fan120:
876 RPM (min = 0 RPM)
CPU Temp: +35 C (low = -1 C, high = +127 C) sensor = diode
M/B Temp: +32 C (low = -1 C, high = +127 C) sensor = thermistor
vid: +1.100 V
|
does anyone know what this "ERROR: Can't get adapter or algorithm?!?" message means?? having my former kernel booted displays no such message.
do i have do reinstall lm_sensors or am i missing an option in my kernel config??
restarting lm_sensors returns no error message. everything seems to be ok.
hope someone could help me with this...
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic!
Last edited by snIP3r on Mon Nov 19, 2007 8:44 pm; edited 1 time in total |
|
| Back to top |
|
 |
blueflame
Tux's lil' helper
Joined: 26 Nov 2006
Posts: 107
Location: Singapore
|
| Posted: Fri Oct 05, 2007 1:36 pm Post subject: |
|
|
I get the same error (I'm on a ASUS M2N-E with an Athlon X2 4000+)
I remember checking around and saw a comment that these chips are only fully supported in the latest version of lm_sensors ... which hasn't made it into portage yet  So I'm just waiting for portage...
You mean lm_sensors worked properly before on your M/B? |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Fri Oct 05, 2007 1:42 pm Post subject: |
|
|
| blueflame wrote: | I get the same error (I'm on a ASUS M2N-E with an Athlon X2 4000+)
I remember checking around and saw a comment that these chips are only fully supported in the latest version of lm_sensors ... which hasn't made it into portage yet So I'm just waiting for portage...
You mean lm_sensors worked properly before on your M/B? |
yes. no error message with my former booted kernel ( 2.6.20-gentoo-r8 )
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Fri Oct 05, 2007 7:28 pm Post subject: |
|
|
Hi,
I am trying to install lm_sensors with the same kernel.
I gave up after having read on lm-sensors.org that 2.6.22 is giving problems.
I unmasked 2.10.4 but still no luck.
sensors-detect wants a module w83627ehf to be loaded but this module
doesn't exist.Closest is w83627hf but it won't load.
So I'll wait until this is all sorted.
(I noticed the lm-sensors.org site is almost impossible to reach.)
Gerard.
Edit: I am on Asus P5W DH Deluxe Intel duo2core.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Sat Oct 06, 2007 7:36 am Post subject: |
|
|
hi!
ok, thats good news to read lm_sensors has problems with 2.6.22 kernel... so there is hope that this is fixed.
@Gerard van Vuuren: i think the pw5dh deluxe uses a sensor that is not supported yet by lm_sensors. same here with my new m2n-sli deluxe am2 board - i also have to wait for hw support of my chips...
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Sat Oct 06, 2007 12:19 pm Post subject: |
|
|
@snIP3r,
Sensors-detect finds a Winbond sensor and also i801 (Intel).
But it also wants a module "eeprom"!
If you ask me it is totally screwed up.
Well I'll wait a couple of months.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Sat Oct 06, 2007 12:27 pm Post subject: |
|
|
| Gerard van Vuuren wrote: | @snIP3r,
Sensors-detect finds a Winbond sensor and also i801 (Intel).
But it also wants a module "eeprom"!
If you ask me it is totally screwed up.
Well I'll wait a couple of months.
Gerard. |
hi gerard!
there exists a module named eepom - i have it loaded here in my config:
| Code: |
area52 ~ # lsmod
Module Size Used by
it87 23632 0
k8temp 7296 0
eeprom 8784 0
i2c_nforce2 7552 0
|
the kernel config for this is:
| Code: |
CONFIG_SENSORS_EEPROM=m
|
under "Miscellaneous I2C Chip support" section
HTH
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Sat Oct 06, 2007 12:48 pm Post subject: |
|
|
When I click on Miscellaneous I2C Chip support I get a blank screen.
I tried setting all kinds of things but it refuses to show anything but a blank screen.
I still have all the files of gentoo-sources 2.6.20-r8 I will try that tomorrow.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Sat Oct 06, 2007 12:52 pm Post subject: |
|
|
| Gerard van Vuuren wrote: | When I click on Miscellaneous I2C Chip support I get a blank screen.
I tried setting all kinds of things but it refuses to show anything but a blank screen.
I still have all the files of gentoo-sources 2.6.20-r8 I will try that tomorrow.
Gerard. |
you can also try to modify the .config file with your favourite editor...
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Sat Oct 06, 2007 2:07 pm Post subject: |
|
|
Yes I guess so but then there should be a file called something like eeprom.c
in /usr/src/linux/drivers/hwmon.
I did find w83627hf.c and w83627ehf.c.
Why the latter doesn't show up in menuconfig is beyond me.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
gerard27
Advocate
Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
|
| Posted: Mon Oct 08, 2007 2:55 pm Post subject: |
|
|
Well my problems have been solved,weird story though!
When I upgrade kernels I always use
with the .config file of the older kernel.Saves time.
Today I found the eeprom.c file which is not in hwmon but
in I2C.
I then saved my .config file and did
and started
This time the misc I2C chipsets didn't show up as a blank page!
I also could find the w83627ehf module!
Something must have happened doing oldconfig.
Anyway lm_sensors now works!
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
| Back to top |
|
|
snIP3r
l33t
Joined: 21 May 2004
Posts: 853
Location: germany
|
| Posted: Mon Nov 19, 2007 8:44 pm Post subject: |
|
|
hi all!
after the latest update of lm_sensors to version 2.10.4 the message is gone.
greets
snIP3r
_________________
Intel i3-4130T on ASUS P9D-X
Kernel 5.15.88-gentoo SMP
-----------------------------------------------
if your problem is fixed please add something like [solved] to the topic! |
|
| Back to top |
|
|
|
Kernel & Hardware
