| View previous topic :: View next topic |
| Author |
Message |
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
 Posted: Thu Nov 01, 2007 12:54 pm Post subject: |
 |
|
| Hi, sorry about being off topic, but you have the same video card/monitor that i have, and I have no idea how to get it running, I have followed the page about setting up Xorg, but it keeps telling me that it can't find the drivers, what should I do? Thanks. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Thu Nov 01, 2007 7:54 pm Post subject: |
|
|
ocean,
Please show us the output of lspci, so we can see what Video card you have. Exact error messages also help to home in on your problem.
Xorg needs a minumum of three drivers.
One each for your Video card, pointer device (mouse, touchpad, tablet ...) and keyboard.
From the generic nature of your error report, we can't tell which driver is missing, it could be any or all of those, which points to you not setting VIDEO_CARDS and INPUT_DEVICES in make.conf. It could also be just that you have not yet configured Xorg.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Fri Nov 02, 2007 3:35 pm Post subject: |
|
|
| when I tried to use the lspci command, it tells me that it does not recognize it, what package should I download to get this tool? I know that my video card is intel 945GM, infact, I'm pretty sure that this is what my computer have. In my make.conf I have INPUT_DEVICES="keyboard mouse" and VIDEO_CARDS="i810" |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Fri Nov 02, 2007 4:21 pm Post subject: |
|
|
ocean,
You need to to get lspci.
When you post the output of lspci, also include your xorg.conf, so we can see what you have asked xorg to do and the /var/log/Xorg.0.log file, which tells what Xorg actually did when it started.
Those three items should provide all the data we need to fix your issue.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Fri Nov 02, 2007 5:12 pm Post subject: |
|
|
here's my lspci output
| Code: |
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
07:06.0 CardBus bridge: Texas Instruments Unknown device 8039
07:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a
07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
07:06.3 Generic system peripheral [0805]: Texas Instruments Unknown device 803c
07:08.0 Ethernet controller: Intel Corporation Intel(R) PRO/100 VE Network Connection (rev 02)
|
and here's my xorg.conf file
| Code: |
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Intel"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 100
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
Modeline "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
Option "PreferedMode" "1280x800"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "Intel 945GM"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "i810"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "Intel 945GM"
VendorName "Intel Corp."
BoardName "Intel 945GM"
Driver "i810"
VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Standard VGA"
Monitor "Intel"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
hopefully this'll help solving the problem, thanks.
*EDIT*
forgot about the log file, here it is
| Code: |
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/gentoolappy:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux gentoolappy 2.6.22-gentoo-r9 #1 SMP Tue Oct 30 21:40:51 GMT 2007 i686
Build Date: 01 November 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 2 12:48:48 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Intel"
(**) | |-->Device "Standard VGA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e55c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1179,ff10 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1179,ff10 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1179,ff10 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1179,ff10 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1179,ff10 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1179,ff10 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1179,ff10 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1179,ff10 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1179,ff10 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1040 rev 02 class 02,80,00 hdr 00
(II) PCI: 07:06:0: chip 104c,8039 card 4400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 07:06:1: chip 104c,803a card 1179,ff10 rev 00 class 0c,00,10 hdr 80
(II) PCI: 07:06:2: chip 104c,803b card 1179,ff10 rev 00 class 01,80,00 hdr 80
(II) PCI: 07:06:3: chip 104c,803c card 1179,ff10 rev 00 class 08,05,01 hdr 80
(II) PCI: 07:08:0: chip 8086,1092 card 1179,ff10 rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd3ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:2), (0,5,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:30:0), (0,7,11), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xdc0fffff (0x100000) MX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 8: bridge is at (7:6:0), (7,8,11), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[1] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/19, 0xc0000000/28, 0xdc200000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(EE) No drivers available.
Fatal server error:
no screens found
|
Thanks. |
|
| Back to top |
|
|
albright
Advocate
Joined: 16 Nov 2003
Posts: 2588
Location: Near Toronto
|
| Posted: Fri Nov 02, 2007 6:30 pm Post subject: |
|
|
It looks like you have not emerged xf86-video-i810.
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Fri Nov 02, 2007 7:23 pm Post subject: |
|
|
ok, so after I have emerged the i810 driver, and tried startx again, it failed yet again, this is the log file it created
| Code: |
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux gentoolappy 2.6.22-gentoo-r9 #1 SMP Tue Oct 30 21:40:51 GMT 2007 i686
Build Date: 01 November 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 2 15:12:02 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Intel"
(**) | |-->Device "Standard VGA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e55c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1179,ff10 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1179,ff10 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1179,ff10 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1179,ff10 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1179,ff10 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1179,ff10 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1179,ff10 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1179,ff10 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1179,ff10 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1040 rev 02 class 02,80,00 hdr 00
(II) PCI: 07:06:0: chip 104c,8039 card 4400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 07:06:1: chip 104c,803a card 1179,ff10 rev 00 class 0c,00,10 hdr 80
(II) PCI: 07:06:2: chip 104c,803b card 1179,ff10 rev 00 class 01,80,00 hdr 80
(II) PCI: 07:06:3: chip 104c,803c card 1179,ff10 rev 00 class 08,05,01 hdr 80
(II) PCI: 07:08:0: chip 8086,1092 card 1179,ff10 rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd3ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:2), (0,5,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:30:0), (0,7,11), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xdc0fffff (0x100000) MX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 8: bridge is at (7:6:0), (7,8,11), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[1] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/19, 0xc0000000/28, 0xdc200000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[22] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[23] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[29] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[30] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[31] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[32] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDC100000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section Intel
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC Model: 3633 Serial#: 0
(II) intel(0): Year: 2005 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): SAMSUNG
(II) intel(0): LTN154X3-L06
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3333600000000
(II) intel(0): 000f0103802115780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101ee1a0080502010301030
(II) intel(0): 13004bcf100000190000000f00000000
(II) intel(0): 00000000002387026402000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31353458332d4c30360a0070
(II) intel(0): EDID vendor "SEC", prod id 13875
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(EE) intel(0): unknown type(0xffffffff)=0xff
(II) intel(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000
(II) intel(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000
(II) intel(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000
(II) intel(0): EIP=0x00000014, EFLAGS=0x00003200
(II) intel(0): code at 0x000c0014:
e9 2d 20 af 40 00 e0 0a 30 30 49 42 4d 20 56 47
41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f
(II) stack at 0x00001ffa:
00 06 00 00 00 32
(II) intel(0): VESA BIOS not detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC Model: 3633 Serial#: 0
(II) intel(0): Year: 2005 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): SAMSUNG
(II) intel(0): LTN154X3-L06
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3333600000000
(II) intel(0): 000f0103802115780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101ee1a0080502010301030
(II) intel(0): 13004bcf100000190000000f00000000
(II) intel(0): 00000000002387026402000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31353458332d4c30360a0070
(II) intel(0): EDID vendor "SEC", prod id 13875
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdc200000 - 0xdc23ffff (0x40000) MS[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[B]
[2] 0 0 0xdc100000 - 0xdc17ffff (0x80000) MS[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[8] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[9] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[10] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[11] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[12] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[13] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[14] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[15] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[16] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[18] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[22] 0 0 0x00001800 - 0x00001807 (0x8) IS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[26] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[27] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(WW) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Using pre-allocated memory only.
(==) intel(0): VideoRam: 7932 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 4860 scanlines for pixmap cache
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Attempting memory allocation with tiled buffers and
small DRI memory manager reservation:
(II) intel(0): Allocating 4860 scanlines for pixmap cache
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Attempting memory allocation with untiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 306 scanlines for pixmap cache
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(II) intel(0): Attempting memory allocation with untiled buffers and
small DRI memory manager reservation:
(II) intel(0): Allocating 306 scanlines for pixmap cache
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(WW) intel(0): Not enough video memory. Disabling DRI.
(II) intel(0): Allocating 306 scanlines for pixmap cache
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(EE) intel(0): Couldn't allocate video memory
Fatal server error:
AddScreen/ScreenInit failed for driver 0
|
What should I do?
Thanks for helping. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Fri Nov 02, 2007 10:25 pm Post subject: |
|
|
ocean,
You are getting the hang of posting the information needed to fix your problem.
Your first error is here:- | Code: | (II) intel(0): EDID vendor "SEC", prod id 13875
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(EE) intel(0): unknown type(0xffffffff)=0xff |
That indicates your kernel is missing
| Code: | Processor type and features --->
[*] Enable VM86 support |
while you are looking at your kernel, check the same menu for
| Code: | <M> /dev/cpu/*/msr - Model-specific register support
[*] MTRR (Memory Type Range Register) support. Those options must be on. |
The second error | Code: | (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(WW) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Using pre-allocated memory only.
(==) intel(0): VideoRam: 7932 KB |
Indicates you need to look at
| Code: | Device Drivers --->
Character devices --->
<M> /dev/agpgart (AGP Support)
<M> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
<M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
<M> Intel 830M, 845G, 852GM, 855GM, 865G
<M> i915 driver |
You may use either <M> or <*> here.
I guess you used genkernel to make your kernel, as it leaves these options off. The suit your chipset.
You can still use genkernel to rebuild your kernel but you must add the --menuconfig option and check/set these options yourself.
Boot into your new kernel, test Xorg and post your new log.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Sat Nov 03, 2007 12:00 am Post subject: |
|
|
after changing the kernel setting, I can finally get into the X window, but I am still getting some warnings and errors, what do they mean?
| Code: |
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux gentoolappy 2.6.22-gentoo-r9 #1 SMP Fri Nov 2 19:34:14 GMT 2007 i686
Build Date: 01 November 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 2 19:44:17 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Intel"
(**) | |-->Device "Standard VGA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e55c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1179,ff10 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1179,ff10 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1179,ff10 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1179,ff10 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1179,ff10 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1179,ff10 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1179,ff10 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1179,ff10 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1179,ff10 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1179,ff10 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1040 rev 02 class 02,80,00 hdr 00
(II) PCI: 07:06:0: chip 104c,8039 card 4400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 07:06:1: chip 104c,803a card 1179,ff10 rev 00 class 0c,00,10 hdr 80
(II) PCI: 07:06:2: chip 104c,803b card 1179,ff10 rev 00 class 01,80,00 hdr 80
(II) PCI: 07:06:3: chip 104c,803c card 1179,ff10 rev 00 class 08,05,01 hdr 80
(II) PCI: 07:08:0: chip 8086,1092 card 1179,ff10 rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd3ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:2), (0,5,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:30:0), (0,7,11), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xdc0fffff (0x100000) MX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 8: bridge is at (7:6:0), (7,8,11), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[1] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0x68000000 - 0x6bffffff (0x4000000) MX[B]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/19, 0xc0000000/28, 0xdc200000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[1] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[2] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[3] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[4] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[5] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[6] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[7] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[8] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[9] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[12] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[13] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[21] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[5] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[6] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[7] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[8] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[9] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[10] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[11] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[12] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[13] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[22] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[23] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[29] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[30] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[31] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[32] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDC100000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section Intel
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC Model: 3633 Serial#: 0
(II) intel(0): Year: 2005 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): SAMSUNG
(II) intel(0): LTN154X3-L06
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3333600000000
(II) intel(0): 000f0103802115780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101ee1a0080502010301030
(II) intel(0): 13004bcf100000190000000f00000000
(II) intel(0): 00000000002387026402000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31353458332d4c30360a0070
(II) intel(0): EDID vendor "SEC", prod id 13875
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC Model: 3633 Serial#: 0
(II) intel(0): Year: 2005 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): SAMSUNG
(II) intel(0): LTN154X3-L06
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3333600000000
(II) intel(0): 000f0103802115780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101ee1a0080502010301030
(II) intel(0): 13004bcf100000190000000f00000000
(II) intel(0): 00000000002387026402000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31353458332d4c30360a0070
(II) intel(0): EDID vendor "SEC", prod id 13875
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdc200000 - 0xdc23ffff (0x40000) MS[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[B]
[2] 0 0 0xdc100000 - 0xdc17ffff (0x80000) MS[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdc005000 - 0xdc005fff (0x1000) MX[B]
[8] -1 0 0xdc006800 - 0xdc0068ff (0x100) MX[B]
[9] -1 0 0xdc004000 - 0xdc004fff (0x1000) MX[B]
[10] -1 0 0xdc000000 - 0xdc003fff (0x4000) MX[B]
[11] -1 0 0xdc006000 - 0xdc0067ff (0x800) MX[B]
[12] -1 0 0xda000000 - 0xda000fff (0x1000) MX[B]
[13] -1 0 0xdc444000 - 0xdc4443ff (0x400) MX[B]
[14] -1 0 0xdc240000 - 0xdc243fff (0x4000) MX[B]
[15] -1 0 0xdc180000 - 0xdc1fffff (0x80000) MX[B](B)
[16] -1 0 0xdc200000 - 0xdc23ffff (0x40000) MX[B](B)
[17] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[18] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[22] 0 0 0x00001800 - 0x00001807 (0x8) IS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x00004000 - 0x0000403f (0x40) IX[B]
[26] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[27] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 4860 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x5f820000 physical)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB, 0x5f832000 physical)
(II) intel(0): 0x00040000-0x03037fff: front buffer (49120 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x03038000-0x03047fff: xaa scratch (64 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB)
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB)
(II) intel(0): 0x06000000-0x07ffffff: DRI memory manager (32768 kB)
(II) intel(0): 0x08000000-0x09ffffff: textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [drm] loaded kernel module for "i915" driver
(II) intel(0): [drm] DRM interface version 1.3
(II) intel(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) intel(0): [drm] added 8192 byte SAREA at 0xf8e7c000
(II) intel(0): [drm] mapped SAREA 0xf8e7c000 to 0xb7b32000
(II) intel(0): [drm] framebuffer handle = 0xc0040000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xdc100000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] init sarea width,height = 1280 x 1280 (pitch 2048)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x28008000
(II) intel(0): [drm] Back Buffer = 0xc4000000
(II) intel(0): [drm] Depth Buffer = 0xc5000000
(II) intel(0): [drm] textures = 0xc8000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x03038000 (pgoffset 12344)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x08000000 (pgoffset 32768)
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 17
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) intel(0): Option "PreferedMode" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(EE) AIGLX error: dlopen of /usr/lib/dri/i915_dri.so failed (/usr/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8e7c000 at 0xb7b32000
(EE) intel(0): I830 Vblank Pipe Setup Failed 0
(EE) intel(0): I830 Vblank Pipe Setup Failed 0
(EE) intel(0): I830 Vblank Pipe Setup Failed 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
|
Thanks. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Sat Nov 03, 2007 12:33 am Post subject: |
|
|
ocean,
Heres your list of warnings an errors. I don't know them all.
| Code: | | (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) |
Xorg can communicate with your acpi directly using this socket. Its not essential but may be useful for power savinings. The system may work around it too, my laptop is too old so I can't test.
| Code: | | (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found |
Your graphics chip can control two independant displays but you have only configured one. If you add another display, you need to extend your xorg.conf to describe how to control it. This is normal for a single display set up.
| Code: | | (WW) intel(0): Bad V_BIOS checksum |
Your BIOS checksum failed - this seems to be normal on Intel integrated chipsets.
| Code: | | (WW) intel(0): Option "PreferedMode" is not used |
You have a n option in your Section "Device" that the driver does not understand and its been ignored.
| Code: | (EE) AIGLX error: dlopen of /usr/lib/dri/i915_dri.so failed (/usr/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering |
The system tried to open a file that you need for AIGLX. AIGLX suggests you are trying to use compiz. Get everything else working before you try that.
| Code: | | (EE) intel(0): I830 Vblank Pipe Setup Failed 0 |
I don't know this one. From Vblank, I guess it has something to do with frame switching during the Vertical Blanking interval.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Sat Nov 03, 2007 1:28 am Post subject: |
|
|
I guess the X server is pretty much done, now I am trying to emerge gnome, but for some reason it keeps failing on me, here's what it outputs when i emerge:
| Code: | Calculating dependencies ..... ..... ..... ..... ....... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 248) dev-util/intltool-0.35.5 to /
* intltool-0.35.5.tar.bz2 RMD160 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA1 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA256 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking intltool-0.35.5.tar.bz2 ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking intltool-0.35.5.tar.bz2 to /var/tmp/portage/dev-util/intltool-0.35.5/work
* Applying intltool-0.35.5-update.patch ...
[ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5 ...
./configure --prefix=/usr --host=i486-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --build=i486-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for perl... /usr/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5/config.log
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
* Messages for package dev-util/intltool-0.35.5:
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
Calculating dependencies ..... ..... ..... ..... ....... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 248) dev-util/intltool-0.35.5 to /
* intltool-0.35.5.tar.bz2 RMD160 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA1 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA256 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking intltool-0.35.5.tar.bz2 ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking intltool-0.35.5.tar.bz2 to /var/tmp/portage/dev-util/intltool-0.35.5/work
* Applying intltool-0.35.5-update.patch ...
[ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5 ...
./configure --prefix=/usr --host=i486-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --build=i486-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for perl... /usr/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5/config.log
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
* Messages for package dev-util/intltool-0.35.5:
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
|
Thanks. |
|
| Back to top |
|
|
tylerwylie
Guru
Joined: 19 Sep 2004
Posts: 458
Location: /US/Georgia/Atlanta
|
| Posted: Sat Nov 03, 2007 4:51 am Post subject: |
|
|
| ocean wrote: | I guess the X server is pretty much done, now I am trying to emerge gnome, but for some reason it keeps failing on me, here's what it outputs when i emerge:
| Code: | Calculating dependencies ..... ..... ..... ..... ....... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 248) dev-util/intltool-0.35.5 to /
* intltool-0.35.5.tar.bz2 RMD160 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA1 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA256 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking intltool-0.35.5.tar.bz2 ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking intltool-0.35.5.tar.bz2 to /var/tmp/portage/dev-util/intltool-0.35.5/work
* Applying intltool-0.35.5-update.patch ...
[ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5 ...
./configure --prefix=/usr --host=i486-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --build=i486-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for perl... /usr/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5/config.log
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
* Messages for package dev-util/intltool-0.35.5:
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
Calculating dependencies ..... ..... ..... ..... ....... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 248) dev-util/intltool-0.35.5 to /
* intltool-0.35.5.tar.bz2 RMD160 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA1 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 SHA256 ;-) ... [ ok ]
* intltool-0.35.5.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking intltool-0.35.5.tar.bz2 ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking intltool-0.35.5.tar.bz2 to /var/tmp/portage/dev-util/intltool-0.35.5/work
* Applying intltool-0.35.5-update.patch ...
[ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5 ...
./configure --prefix=/usr --host=i486-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --build=i486-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for perl... /usr/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/dev-util/intltool-0.35.5/work/intltool-0.35.5/config.log
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
* Messages for package dev-util/intltool-0.35.5:
*
* ERROR: dev-util/intltool-0.35.5 failed.
* Call stack:
* ebuild.sh, line 1695: Called dyn_compile
* ebuild.sh, line 1033: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 700: Called econf
* ebuild.sh, line 632: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/dev-util/intltool-0.35.5/temp/build.log'.
*
|
Thanks. |
Here's your error: | Code: | checking for perl... /usr/bin/perl
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool |
You will need to install the XML parser perl module it seems, I am not sure which package that is exactly as I do not have a gentoo system with me right now. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Sat Nov 03, 2007 11:07 am Post subject: |
|
|
ocean,
| Code: | | emerge dev-perl/XML-Parser |
is your workaround.
You have found a bug. The package dev-util/intltool-0.35.5 needs dev-perl/XML-Parser but emerge has not worked out that its needed.
Thats not supposed to happen. Please check bugs.gentoo.org for a prior report. If you are first, please create a new bug report.
That way it will get fixed for people that come after you. Welcome to the Open Source Community.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
albright
Advocate
Joined: 16 Nov 2003
Posts: 2588
Location: Near Toronto
|
| Posted: Sat Nov 03, 2007 12:57 pm Post subject: |
|
|
I think "preferedmode" should be "preferredmode"
(Note 2 r's).
As for the i915_dri error, have you selected the kernel
drm modules for you video chip?
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Sat Nov 03, 2007 4:27 pm Post subject: |
|
|
after trying to emerge the XML parser, it works until I get to this pango file, it keeps saying there's a make error
| Code: | >>> Unpacking source...
>>> Unpacking pango-1.16.5.tar.bz2 to /var/tmp/portage/x11-libs/pango-1.16.5/work
[32;01m*[0m Fixing OMF Makefiles ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Running elibtoolize in: pango-1.16.5
[32;01m*[0m Applying portage-1.5.10.patch ...
[32;01m*[0m Applying sed-1.5.6.patch ...
[32;01m*[0m Removing useless C++ checks ...
[A[72C [34;01m[ [32;01mok[34;01m ][0m
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5 ...
* econf: updating pango-1.16.5/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating pango-1.16.5/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i486-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-gtk-doc --build=i486-pc-linux-gnu
|
lots of junk follows that, and this is the end of the log file.
| Code: | libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libgobject-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libgmodule-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libglib-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libgobject-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libgmodule-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libglib-2.0.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libfontconfig.la' seems to be moved
libtool: link: warning: `/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../..//libfreetype.la' seems to be moved
generating symbol list for `pango-tibetan-fc.la'
/usr/bin/nm -B .libs/tibetan-fc.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/pango-tibetan-fc.exp
/bin/grep -E -e "^script_engine_.*" ".libs/pango-tibetan-fc.exp" > ".libs/pango-tibetan-fc.expT"
mv -f ".libs/pango-tibetan-fc.expT" ".libs/pango-tibetan-fc.exp"
echo "{ global:" > .libs/pango-tibetan-fc.ver
cat .libs/pango-tibetan-fc.exp | sed -e "s/\(.*\)/\1;/" >> .libs/pango-tibetan-fc.ver
echo "local: *; };" >> .libs/pango-tibetan-fc.ver
i486-pc-linux-gnu-gcc -shared .libs/tibetan-fc.o -Wl,--rpath -Wl,/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/pango/.libs -L/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/pango/.libs /usr/lib/libgobject-2.0.so -L/usr/lib /usr/lib/libgmodule-2.0.so -ldl /usr/lib/libglib-2.0.so ../../pango/.libs/libpango-1.0.so -L/usr/lib/gcc/i486-pc-linux-gnu/4.1.2/../../../ ../../pango/.libs/libpangoft2-1.0.so /usr/lib/libfontconfig.so /usr/lib/libfreetype.so -lz -mtune=i686 -Wl,-soname -Wl,pango-tibetan-fc.so -Wl,-version-script -Wl,.libs/pango-tibetan-fc.ver -o .libs/pango-tibetan-fc.so
creating pango-tibetan-fc.la
(cd .libs && rm -f pango-tibetan-fc.la && ln -s ../pango-tibetan-fc.la pango-tibetan-fc.la)
make[3]: Leaving directory `/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/modules/tibetan'
make[3]: Entering directory `/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/modules'
Writing a pango.modules file to use with tests/examples.
/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/pango/.libs/lt-pango-querymodules: error while loading shared libraries: libexpat.so.0: cannot open shared object file: No such file or directory
make[3]: *** [pango.modules] Error 127
make[3]: Leaving directory `/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/modules'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5/modules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/x11-libs/pango-1.16.5/work/pango-1.16.5'
make: *** [all] Error 2
[31;01m*[0m
[31;01m*[0m ERROR: x11-libs/pango-1.16.5 failed.
[31;01m*[0m Call stack:
[31;01m*[0m ebuild.sh, line 1695: Called dyn_compile
[31;01m*[0m ebuild.sh, line 1033: Called qa_call 'src_compile'
[31;01m*[0m ebuild.sh, line 44: Called src_compile
[31;01m*[0m ebuild.sh, line 1377: Called gnome2_src_compile
[31;01m*[0m gnome2.eclass, line 71: Called die
[31;01m*[0m The specific snippet of code:
[31;01m*[0m emake || die "compile failure"
[31;01m*[0m The die message:
[31;01m*[0m compile failure
[31;01m*[0m
[31;01m*[0m If you need support, post the topmost build error, and the call stack if relevant.
[31;01m*[0m A complete build log is located at '/var/tmp/portage/x11-libs/pango-1.16.5/temp/build.log'.
[31;01m*[0m
|
the only thing I can see is
| Code: | | error while loading shared libraries: libexpat.so.0: cannot open shared object file: No such file or directory |
which probably means something is missing, but I have no clue what to emerge to fix this.
Thanks. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Sat Nov 03, 2007 5:22 pm Post subject: |
|
|
ocean,
This error happens because you have a stage tarball built for the old expat library and the expat part has been updated to use a new interface.
This breaks everything that depends on the old expat interface as the two are not compatible.
Proceed as follows.
emerge gentoolkit if you don't already have it. mzbot in #gentoo says | Quote: | | expat-2.0.1 is not ABI compatible with earlier versions. Run the following in bash to fix: "emerge -n1 '>=portage-2.1.2.12' portage-utils && emerge -qep world | grep --color=never -oFf <(scanelf -plRBF '%F %n' | awk '/libexpat.so.0/{print $1}' | xargs qfile -qC | sort -u; echo -e "libtool\ncurl") | xargs emerge -1". If a specific package fails, "/msg mzbot faq remerge-deep" for advice (gtk+/pango are common) |
and | Code: | | If, while trying to fix the expat mess, a package won't build then run the following (substituting "gtk+" with the name of whichever package that failed): "emerge -n portage-utils && grep -vxFf <(emerge -qep system) <(emerge -qep gtk+) | sed -rne '/^\[ebuild/{s/(^| )\[[^]]*\]( |$)//gp}' | xargs qatom | awk '{print $1"/"$2}' | xargs emerge -1". Afterwards, run "emerge --resume" to continue. |
tat seems to fix it for most users.
Copy and paste the commands.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Sun Nov 04, 2007 2:16 am Post subject: |
|
|
ok, I have tried the commands that you give me, I don't really understand what exactly it does, but now I get a new error when I tried to emerge gnome, I even tried emerge -e system and emerge -e world, but the error is still there, here's the output from emerge gnome:
| Code: | Calculating dependencies ..... ..... ..... ....... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 135) x11-libs/gtk+-2.10.14 to /
* gtk+-2.10.14.tar.bz2 RMD160 ;-) ... [ ok ]
* gtk+-2.10.14.tar.bz2 SHA1 ;-) ... [ ok ]
* gtk+-2.10.14.tar.bz2 SHA256 ;-) ... [ ok ]
* gtk+-2.10.14.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking gtk+-2.10.14.tar.bz2 ;-) ... [ ok ]
* Please re-emerge x11-libs/cairo with the X USE flag set
*
* ERROR: x11-libs/gtk+-2.10.14 failed.
* Call stack:
* ebuild.sh, line 1711: Called dyn_setup
* ebuild.sh, line 762: Called qa_call 'pkg_setup'
* ebuild.sh, line 44: Called pkg_setup
* gtk+-2.10.14.ebuild, line 50: Called die
* The specific snippet of code:
* die "cairo needs the X flag set"
* The die message:
* cairo needs the X flag set
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-libs/gtk+-2.10.14/temp/build.log'.
*
* Messages for package x11-libs/gtk+-2.10.14:
*
* ERROR: x11-libs/gtk+-2.10.14 failed.
* Call stack:
* ebuild.sh, line 1711: Called dyn_setup
* ebuild.sh, line 762: Called qa_call 'pkg_setup'
* ebuild.sh, line 44: Called pkg_setup
* gtk+-2.10.14.ebuild, line 50: Called die
* The specific snippet of code:
* die "cairo needs the X flag set"
* The die message:
* cairo needs the X flag set
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-libs/gtk+-2.10.14/temp/build.log'.
*
|
Thanks.
*EDIT*
I have also added X to the USE flag, but that didn't help either, I guess X flag means somethingelse. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Sun Nov 04, 2007 11:58 am Post subject: |
|
|
ocean,
Close. | Code: | | Please re-emerge x11-libs/cairo with the X USE flag set |
Add X to your USE=" " in /etc/make.conf (not x, its case sensitive)
Now | Code: | | emerge -1 x11-libs/cairo |
so cairo is made with its optional support for Xorg.
When that completes, contine with Gnome.
The commands I gave you above build a list of the packages broken by the expat update then emerge them against the new expat so that they work again.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
ocean
n00b
Joined: 29 Oct 2007
Posts: 41
|
| Posted: Sun Nov 04, 2007 9:09 pm Post subject: |
|
|
Now I can finally get into a graphical interface, thank you very much NeddySeagoon, I still have a few questions left, first does
| Code: | | emerge -1 <package> |
means to re-emerge the package again?
and also I have a few more question not related to Desktop Environments, such as I still need to get my wireless working, and my speaker as well, should I ask here?
Thanks. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54391
Location: 56N 3W
|
| Posted: Sun Nov 04, 2007 10:18 pm Post subject: |
|
|
ocean,
| Code: | | emerge -1 <package> |
is shorthand for emerge --oneshot.
That option does not add the package to your world file, which contains a list of all the packages you have emerged with commands like but it does not list all the packages that emerge has calculated you need to support your request.
cario is always installed as a supporting package. Its just untidy if it gets into the world file. No long term harm is done.
Start a new thread to ask about wireless networking in Kernel and Hardware. If you post it here many possible helpers will miss it.
Search first, your questions may already be answered. Use google and put after your search terms, so google on searches gentoo.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
otisranson
Apprentice
Joined: 17 May 2007
Posts: 188
|
| Posted: Tue Nov 13, 2007 3:23 am Post subject: |
|
|
If you have a WXGA, then the max resolution for the screen is 1280x800. The card itself can do higher resolutions, but the screen won't work with higher resolutions. I have tried.  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
