| View previous topic :: View next topic |
| Author |
Message |
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
 Posted: Sat Oct 20, 2007 7:07 am Post subject: DOOM 3 will not run. SOLVED |
 |
|
I'm running the latest Gentoo sources (2.6.22-r and for some reason Doom 3 will not run. I'm using nVidia drivers/card and Doom3 has worked with this setup before on an earlier kernel/configuration. Below is output from running Doom 3 from the terminal:
tylerm@gentoo_sulaco ~ $ doom3
DOOM 1.3.1.1304 linux-x86 Jan 16 2007 21:58:02
found interface eth0 - 192.168.0.103/255.255.255.0
found interface lo - loopback
------ Initializing File System ------
Loaded pk4 /usr/local/games/doom3/base/game01.pk4 with checksum 0x51c6981f
Loaded pk4 /usr/local/games/doom3/base/game02.pk4 with checksum 0xf3ec6f7
Loaded pk4 /usr/local/games/doom3/base/game03.pk4 with checksum 0x5d4230ea
Loaded pk4 /usr/local/games/doom3/base/pak000.pk4 with checksum 0x28d208f1
Loaded pk4 /usr/local/games/doom3/base/pak001.pk4 with checksum 0x40244be0
Loaded pk4 /usr/local/games/doom3/base/pak002.pk4 with checksum 0xc51ecdcd
Loaded pk4 /usr/local/games/doom3/base/pak003.pk4 with checksum 0xcd79d028
Loaded pk4 /usr/local/games/doom3/base/pak004.pk4 with checksum 0x765e4f8b
Loaded pk4 /usr/local/games/doom3/base/pak005.pk4 with checksum 0x8ffc3621
Loaded pk4 /usr/local/games/doom3/base/pak006.pk4 with checksum 0x95b65ab
Loaded pk4 /usr/local/games/doom3/base/pak007.pk4 with checksum 0x666bdb3c
Loaded pk4 /usr/local/games/doom3/base/pak008.pk4 with checksum 0x23ae5993
Current search path:
/home/tylerm/.doom3/base
/usr/local/games/doom3/base
/usr/local/games/doom3/base/pak008.pk4 (3 files)
/usr/local/games/doom3/base/pak007.pk4 (38 files)
/usr/local/games/doom3/base/pak006.pk4 (48 files)
/usr/local/games/doom3/base/pak005.pk4 (63 files)
/usr/local/games/doom3/base/pak004.pk4 (5137 files)
/usr/local/games/doom3/base/pak003.pk4 (4676 files)
/usr/local/games/doom3/base/pak002.pk4 (6120 files)
/usr/local/games/doom3/base/pak001.pk4 (8972 files)
/usr/local/games/doom3/base/pak000.pk4 (2698 files)
/usr/local/games/doom3/base/game03.pk4 (2 files)
/usr/local/games/doom3/base/game02.pk4 (2 files)
/usr/local/games/doom3/base/game01.pk4 (2 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
--------------------------------------
----- Initializing Decls -----
------------------------------
------- Initializing renderSystem --------
using ARB renderSystem
renderSystem initialized.
--------------------------------------
5206 strings read from strings/english.lang
Couldn't open journal files
execing editor.cfg
execing default.cfg
couldn't exec DoomConfig.cfg
couldn't exec autoexec.cfg
5206 strings read from strings/english.lang
----- Initializing Sound System ------
sound system initialized.
--------------------------------------
----- R_InitOpenGL -----
Setup X display connection
dlopen(libGL.so.1)
Initializing OpenGL display
Using XFree86-VidModeExtension Version 2.2
DGA DirectVideo Mouse (Version 2.0) initialized
Free86-VidModeExtension Activated at 640x480
Using 8/8/8 Color bits, 8 Alpha bits, 24 depth, 8 stencil display.
NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering.
GL_RENDERER: Quadro FX 1000/AGP/SSE2
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_imaging GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_vertex_program GL_ARB_window_pos GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_paletted_texture GL_EXT_pixel_buffer_object GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_shared_texture_palette GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_sRGB GL_EXT_timer_query GL_EXT_vertex_array GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_copy_depth_to_color GL_NV_depth_clamp GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program_option GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_packed_depth_stencil GL_NV_texgen_reflection GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_vertex_program2_option GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
------- Input Initialization -------
XKB extension: compile time 0x1:0x0, runtime 0x1:0x0: OK
XKB extension present on server ( 0x1:0x0 )
------------------------------------
dlopen(libasound.so.2)
asoundlib version: 1.0.14a
Alsa is available
------ Alsa Sound Initialization -----
opened Alsa PCM device default for playback
device buffer size: 5461 frames ( 21844 bytes )
allocated a mix buffer of 16384 bytes
--------------------------------------
...using GL_ARB_multitexture
...using GL_ARB_texture_env_combine
...using GL_ARB_texture_cube_map
...using GL_ARB_texture_env_dot3
...using GL_ARB_texture_env_add
X..GL_ARB_texture_non_power_of_two not found
...using GL_ARB_texture_compression
...using GL_EXT_texture_compression_s3tc
...using GL_EXT_texture_filter_anisotropic
maxTextureAnisotropy: 8.000000
...using GL_1.4_texture_lod_bias
...using GL_EXT_shared_texture_palette
...using GL_EXT_texture3D
...using GL_EXT_stencil_wrap
X..GL_NV_register_combiners not found
X..GL_EXT_stencil_two_side not found
X..GL_ATI_separate_stencil not found
X..GL_ATI_fragment_shader not found
X..GL_ATI_text_fragment_shader not found
X..GL_ARB_vertex_buffer_object not found
...using GL_ARB_vertex_program
...using GL_ARB_fragment_program
X..EXT_depth_bounds_test not found
---------- R_NV20_Init ----------
Not available.
----------- R200_Init -----------
Not available.
---------- R_ARB2_Init ----------
Available.
---------------------------------
----- R_ReloadARBPrograms -----
glprogs/test.vfp
glprogs/test.vfp
glprogs/interaction.vfp
glprogs/interaction.vfp
glprogs/bumpyEnvironment.vfp
glprogs/bumpyEnvironment.vfp
glprogs/ambientLight.vfp
glprogs/ambientLight.vfp
glprogs/shadow.vp
glprogs/R200_interaction.vp
glprogs/nv20_bumpAndLight.vp
glprogs/nv20_diffuseColor.vp
glprogs/nv20_specularColor.vp
glprogs/nv20_diffuseAndSpecularColor.vp
glprogs/environment.vfp
glprogs/environment.vfp
glprogs/arbVP_glasswarp.txt: File not found
glprogs/arbFP_glasswarp.txt: File not found
-------------------------------
WARNING: vertex array range in virtual memory (SLOW)
signal caught: Segmentation fault
si_code 1
Trying to exit gracefully..
Shutting down sound hardware
----------- Alsa Shutdown ------------
close pcm
dlclose
--------------------------------------
idRenderSystem::Shutdown()
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds
Last edited by Thaidog on Sun Oct 21, 2007 6:01 am; edited 1 time in total |
|
| Back to top |
|
 |
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
| Posted: Sat Oct 20, 2007 9:18 am Post subject: |
|
|
Segfault could mean anything in general. Most common would be faulty hardware - especially memory. Then may be faulty/corrupted libraries.
In your case, direct rendering is not enabled. So better check on that first. (try re-emerging nvidia drivers and do "eselect opengl set nvidia" and run "ldconfig".) Also, which nvidia-driver version are you running and on which card ? (remember that the latest mainstream driver supports gpu's only from geforce fx (5) series onwards. So you may want legacy drivers in that case.)
_________________
Helium Sources || Gentoo Minimal Livecd |
|
| Back to top |
|
|
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
| Posted: Sat Oct 20, 2007 9:23 am Post subject: |
|
|
Ok, I see its a quadro fx 1000 gpu (not much idea about those  ). About permissions to /dev/nvidiactl, I guess try running the game as root and also, try upgrading to latest drivers because of security issues with /dev/nvidia* files (100.14.23 was released today ).
_________________
Helium Sources || Gentoo Minimal Livecd |
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 3:07 am Post subject: |
|
|
| hirakendu wrote: | | Ok, I see its a quadro fx 1000 gpu (not much idea about those ). About permissions to /dev/nvidiactl, I guess try running the game as root and also, try upgrading to latest drivers because of security issues with /dev/nvidia* files (100.14.23 was released today ). |
The game will not run as root. I updated to the latest drivers .23... I've got the following enabled:
nvidia-xconfig --composite
nvidia-xconfig --allow-glx-with-composite
nvidia-xconfig --render-accel
nvidia-xconfig --add-argb-glx-visuals
Still no go. Strange!
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 4:00 am Post subject: |
|
|
I've got a yes for direct rendering. I manually installed the latest .23 drivers. I'll try out that .conf file.
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 4:08 am Post subject: |
|
|
That's a no-go with that .conf file also.
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
| Posted: Sun Oct 21, 2007 4:34 am Post subject: |
|
|
But you get these messages :
| Quote: | NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering. |
May be you can google around that. Example, look at the thread in nvnews forums :
http://www.nvnews.net/vbulletin/showthread.php?t=89965
In short, hopefully you have the line :
| Quote: | | options nvidia NVreg_DeviceFileMode=432 NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=27 NVreg_ModifyDeviceFiles=1 |
in your /etc/modules.d/nvidia (if not, after adding that, do run "update-modules" and reload nvidia module). And also hoping you have the line
| Quote: | | KERNEL=="nvidia*", NAME="%k", GROUP="video" |
in /etc/udev/rules.d/50-udev.rules.
PS : Can you run any opengl application? Say "glxgears" ?
_________________
Helium Sources || Gentoo Minimal Livecd |
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 4:50 am Post subject: |
|
|
| hirakendu wrote: | But you get these messages :
| Quote: | NVIDIA: could not open the device file /dev/nvidiactl (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering. |
May be you can google around that. Example, look at the thread in nvnews forums :
http://www.nvnews.net/vbulletin/showthread.php?t=89965
In short, hopefully you have the line :
| Quote: | | options nvidia NVreg_DeviceFileMode=432 NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=27 NVreg_ModifyDeviceFiles=1 |
in your /etc/modules.d/nvidia (if not, after adding that, do run "update-modules" and reload nvidia module). And also hoping you have the line
| Quote: | | KERNEL=="nvidia*", NAME="%k", GROUP="video" |
in /etc/udev/rules.d/50-udev.rules.
PS : Can you run any opengl application? Say "glxgears" ? |
glxgears runs fine as well as gl screensavers. I'll do a little googling and see what I can find.
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 4:57 am Post subject: |
|
|
PS I've got those lines in both files already.... not sure what's up...
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
| Posted: Sun Oct 21, 2007 5:25 am Post subject: |
|
|
Strange . Btw, hope the user is in video (and games) group. Try fiddling with the permissions of /dev/nvidiactl (try with 777, which is most insecure btw ).
_________________
Helium Sources || Gentoo Minimal Livecd |
|
| Back to top |
|
|
Thaidog
Veteran
Joined: 19 May 2004
Posts: 1053
|
| Posted: Sun Oct 21, 2007 6:00 am Post subject: |
|
|
| hirakendu wrote: | | Strange . Btw, hope the user is in video (and games) group. Try fiddling with the permissions of /dev/nvidiactl (try with 777, which is most insecure btw ). |
Shoot man.... all this and it turns out I was not in the freaking video group after all. Stupid!!! Thanks for the help though... it's now running fine.
_________________
Registered Linux User: 437619
"I'm a big believer in technology over politics" - Linus Torvalds |
|
| Back to top |
|
|
hirakendu
Guru
Joined: 24 Jan 2007
Posts: 386
Location: san diego
|
|
| Back to top |
|
|
|
Unsupported Software
.