| View previous topic :: View next topic |
| Author |
Message |
LJM9000
Tux's lil' helper
Joined: 31 Aug 2006
Posts: 76
Location: United States
|
 Posted: Wed Oct 31, 2007 4:25 pm Post subject: HP tx1308nr (tx1000 series) laptop help |
 |
|
I have been messing with this laptop for about a week trying to get everything set up. I am having a few problems.
I will list them out since its easier to see that way
*Sound - ALSA compiled into kernel, but muted and cannot be unmuted. The laptop has a sound mute button, but that does not function (maybe ACPI Problem?)
*TouchScreen - I have the proprietary Xorg touchscreen driver installed. The screen is working but I think the screen size is wrong.
*Multifunction Buttons - Haven't messed with these at all, maybe if someone could just point me in the right direction.
Here is all the useful outputs I figured would be needed.
LSPCI
| Code: | 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51 PCI Express Bridge (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 Network controller: Broadcom Corporation Unknown device 4311 (rev 02)
|
DMESG
| Code: | Linux version 2.6.22-gentoo-r8 (root@lisa) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #13 SMP Tue Oct 30 23:08:41 CDT 2007
Command line: root=/dev/sda3 noapic acpi_irq_balance irqfixup irqdebug pci=biosirq pci=nomsi acpi_osi="!Linux" acpi_os_name="Windows 2006"
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf00000 (usable)
BIOS-e820: 000000003bf00000 - 000000003bf14000 (ACPI data)
BIOS-e820: 000000003bf14000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
PCI: Unknown option `biosirq'
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 245504) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F8940, 0014 (r0 HP )
ACPI: RSDT 3BF0AE39, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 3BF13B16, 0074 (r1 HP MCP51M 6040000 PTL_ F4240)
ACPI: DSDT 3BF0AE79, 8C9D (r1 HP MCP51M 6040000 MSFT 3000000)
ACPI: FACS 3BF14FC0, 0040
ACPI: SSDT 3BF13B8A, 0206 (r1 HP POWERNOW 6040000 LTP 1)
ACPI: MCFG 3BF13D90, 003C (r1 HP MCFG 6040000 LTP 0)
ACPI: HPET 3BF13DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC 3BF13E04, 005E (r1 HP APIC 6040000 LTP 0)
ACPI: BOOT 3BF13E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 3BF13E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003bf00000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 245504) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003bf00000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 245504
On node 0 totalpages: 245405
DMA zone: 56 pages used for memmap
DMA zone: 1870 pages reserved
DMA zone: 2071 pages, LIFO batch:0
DMA32 zone: 3300 pages used for memmap
DMA32 zone: 238108 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51 MPTABLE: APIC at: 0xFEE00000
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to flat
Processors: 2
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37872 bytes of per cpu data
Built 1 zonelists. Total pages: 240179
Kernel command line: root=/dev/sda3 noapic acpi_irq_balance irqfixup irqdebug pci=biosirq pci=nomsi acpi_osi="!Linux" acpi_os_name="Windows 2006"
Misrouted IRQ fixup support enabled.
This may impact system performance.
ACPI: Disabled _OSI(Linux)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 797.853 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ 17f0000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 960284k/982016k available (3984k kernel code, 21336k reserved, 2209k data, 348k init)
Calibrating delay using timer specific routine.. 1597.33 BogoMIPS (lpj=3194662)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI: Overriding _OS definition to 'Windows 2006'
ACPI: setting ELCR to 0200 (from 0ca0)
Using local APIC timer interrupts.
result 12466465
Detected 12.466 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 1598.94 BogoMIPS (lpj=3197881)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
Brought up 2 CPUs
migration_cost=490
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e06fffff
PCI: No mmconfig possible on device 00:18
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 10 11 14 15) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 23
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:04: ioport range 0x1000-0x107f has been reserved
pnp: 00:04: ioport range 0x1080-0x10ff has been reserved
pnp: 00:04: ioport range 0x1400-0x147f has been reserved
Time: hpet clocksource has been installed.
pnp: 00:04: ioport range 0x1480-0x14ff has been reserved
pnp: 00:04: ioport range 0x1800-0x187f has been reserved
pnp: 00:04: ioport range 0x1880-0x18ff has been reserved
pnp: 00:04: ioport range 0x2000-0x203f has been reserved
PCI: Bridge: 0000:00:02.0
IO window: 4000-4fff
MEM window: c4000000-c7ffffff
PREFETCH window: c9000000-c91fffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: c8000000-c8ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:10.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: Thermal Zone [THRM] (46 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
usbcore: registered new interface driver ub
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 0103c:30bf bound to 0000:00:14.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
netconsole: not configured, aborting
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 241
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: Slimtype DVD A DS8A1H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
sata_nv 0000:00:0e.0: version 3.4
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x00000000000130b0 ctl 0x00000000000130a6 bmdma 0x0000000000013090 irq 10
ata2: SATA max UDMA/133 cmd 0x00000000000130a8 ctl 0x00000000000130a2 bmdma 0x0000000000013098 irq 10
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 891F PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 11, io mem 0xc0005000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 10, io mem 0xc0004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new high speed USB device using ehci_hcd and address 3
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.3: new full speed USB device using ehci_hcd and address 4
usb 1-2.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver berry_charge
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
i2c /dev entries driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Bluetooth: Broadcom Blutonium firmware driver ver 1.1
usbcore: registered new interface driver bcm203x
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
input: eGalax INC. USB TouchController as /class/input/input5
input: USB HID v2.10 Pointer [eGalax INC. USB TouchController] on usb-0000:00:0b.1-2.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:10.1 to 64
hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
ALSA device list:
#0: HDA NVidia at 0xc0000000 irq 9
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (version 2.00.00)
powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x11
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input6
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 348k freed
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:05.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.09 Sat May 26 00:43:07 PDT 2007
ndiswrapper version 1.49rc4 loaded (smp=yes, preempt=no)
ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:03:00.0 to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:1a:73:9d:5b:57 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
eth0: no link during initialization.
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
|
LSMOD
| Code: | Module Size Used by
ndiswrapper 185728 0
nvidia 8107704 26
uvcvideo 43908 0
|
XORG.CONF
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "EETI" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "xtrap"
Load "glx"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "EETI"
Driver "egalax"
Option "Device" "/dev/input/event5"
Option "Parameters" "/etc/egalax.cal"
Option "ScreenNo" "0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "C51 PCI Express Bridge"
BusID "PCI:0:5:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "MCP51 PMU"
# BusID "PCI:0:10:3"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
grub.conf
Saw the second one on a forum and they said those kernel options fixed their problems.
| Code: |
title Gentoo
title Gentoo
root (hd0,0)
kernel /boot/kernel-2.6.22-r8-2 root=/dev/sda3
title=Test
title=Test
root (hd0,0)
kernel /boot/kernel-2.6.22-r8-2 root=/dev/sda3 noapic acpi_irq_balance irqfixup irqdebug pci=biosirq pci=nomsi acpi_osi="!Linux" acpi_os_name="Windows 2006"
|
|
|
| Back to top |
|
 |
LJM9000
Tux's lil' helper
Joined: 31 Aug 2006
Posts: 76
Location: United States
|
| Posted: Wed Oct 31, 2007 4:29 pm Post subject: |
|
|
.config that was not working removed.
Last edited by LJM9000 on Thu Nov 01, 2007 7:03 pm; edited 1 time in total |
|
| Back to top |
|
|
LJM9000
Tux's lil' helper
Joined: 31 Aug 2006
Posts: 76
Location: United States
|
| Posted: Thu Nov 01, 2007 7:02 pm Post subject: |
|
|
| Sound Issue has been solved. I compiled a new kernel without alsa support and masked the current alsa-driver-1.0.14-r1 package and emerged alsa-driver-1.0.15 which has the needed support built in. Once I get the touchscreen working I will post a guide with the steps needed to get all the functionality. |
|
| Back to top |
|
|
LJM9000
Tux's lil' helper
Joined: 31 Aug 2006
Posts: 76
Location: United States
|
| Posted: Wed Nov 07, 2007 5:47 pm Post subject: |
|
|
Forgot to post that I have the touchscreen working like a charm. It works a million times better in Gentoo than it did in Vista (not a suprise).
I downloaded the EETI drivers from here: http://210.64.17.161:1182/web20/TouckDriver/linuxDriver.htm
Note: Don't waste your time with the evtouch drivers. I couldn't get them to compile under 64bit at all.
Some notes about the EETI drivers, make sure you have EventInterface built into the kernel as well as hiddev. Although the drivers support other forms of input, the only one that results in a working touchpad is when you use the hiddev driver. After that is built into the kernel and you have the drivers installed and xorg edited everything else works like a charm.
I have yet to have time to work on the multifunction keyboard parts.
Let me know if anyone needs help with the audio or touchscreen |
|
| Back to top |
|
|
Vineus
n00b
Joined: 23 Mar 2006
Posts: 42
Location: Paris, France
|
| Posted: Thu Dec 06, 2007 9:55 pm Post subject: |
|
|
| LJM9000 wrote: | Forgot to post that I have the touchscreen working like a charm. It works a million times better in Gentoo than it did in Vista (not a suprise).
Some notes about the EETI drivers, make sure you have EventInterface built into the kernel as well as hiddev. Although the drivers support other forms of input, the only one that results in a working touchpad is when you use the hiddev driver. After that is built into the kernel and you have the drivers installed and xorg edited everything else works like a charm.
|
You saved my life on that 
I have noticed 2 problems:
* when you rotate the screen you have to recalibrate it
* on software like xjournal, the screen is absolutely not calibrated. I suppose xjournal take coordinates directly from the driver when Touchkit only configure a virtual mouse and just add differences acquiered during calibration to what the driver actually returns to generate mouse coordinates.
The last thing is very annoying, does this happened with evtouch ?
_________________
Vineus |
|
| Back to top |
|
|
Vineus
n00b
Joined: 23 Mar 2006
Posts: 42
Location: Paris, France
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
