| View previous topic :: View next topic |
| Author |
Message |
wyvern
Tux's lil' helper
Joined: 04 Apr 2003
Posts: 99
Location: Victoria, B.C.
|
 Posted: Wed Jun 18, 2003 5:09 pm Post subject: Xcdroast problem: cannot format medium? (solved) |
 |
|
I trying to burn a CD remotely for a user that's having difficulty with xcdroast. The setup and burn process starts normally but aborts when trying to write the data. This has happened with multiple blank CDs, so it's not intermittent.
Any burning gurus out there? Here's the error output from xcdroast:
| Code: |
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" fs=4096k driveropts=burnproof -v -useinfo s
peed=1 -dao -eject -pad -data "/usr/cdimage/run021-023-01.img" ...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
pregap1: -1
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J<F6>rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX185E3 '
Revision : 'L08f'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
FIFO size : 4194304 = 4096 KB
Track 01: data 347 MB padsize: 30 KB
Total size: 399 MB (39:33.32) = 177999 sectors
Lout start: 399 MB (39:35/24) = 177999 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 181846
Starting to write CD/DVD at speed 8 in write mode for single session.
0 seconds. Operation starts.
cdrecord: Turning BURN-Proof on
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 2E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.578s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 1142784 bytes
Writing time: 38.621s
Fixating...
Fixating time: 0.001s
|
It claims the medium is incompatible, but the user claims that he was able to burn CD's before he moved the machine off-island. the CD's he's using are 700MB CD-RWs. He's using a different user accout, but xcdroast is configured to give all users permission to it.
Any help would be appreciated!
_________________
---
ex nihilo nihil fit
Last edited by wyvern on Sat Jun 21, 2003 7:11 pm; edited 1 time in total |
|
| Back to top |
|
 |
wyvern
Tux's lil' helper
Joined: 04 Apr 2003
Posts: 99
Location: Victoria, B.C.
|
| Posted: Sat Jun 21, 2003 7:11 pm Post subject: *solved* |
|
|
Strangely enough, removing the cd-rw drive and putting it back fixed the problem. 
_________________
---
ex nihilo nihil fit |
|
| Back to top |
|
|
Hypnos
Advocate
Joined: 18 Jul 2002
Posts: 2889
Location: Omnipresent
|
| Posted: Thu Jun 26, 2003 10:32 am Post subject: |
|
|
I'm having a similar problem; cold reboots (or even hot swaps) don't help:
| Code: | Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=ATAPI:0,0,0 gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=4 -dao -eject -pad -data "/tmp/home.iso" ...
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
pregap1: -1
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identifikation : 'DW-28E '
Revision : 'A.0B'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1441792 = 1408 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 581 MB padsize: 30 KB
Total size: 668 MB (66:10.97) = 297823 sectors
Lout start: 668 MB (66:12/73) = 297823 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 5
A1 values: 02 4C D0
A2 values: 4A D8 5A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 62026
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 FF D2 27 0A 00 00 00 00 0C 00 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 16765479 (valid)
cmd finished after 1.103s timeout 200s
Writing pregap for track 1 at -150
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
write track pad data: error after 0 bytes
CDB: 2A 00 00 00 00 00 00 00 1F 00
BFree: 1617 K BSize: 1617 K
status: 0x2 (CHECK CONDITION)
Starting new track at sector: 0
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 16.840s
Average write speed 648.2x.
Fixating...
Fixating time: 0.000s
BURN-Free was never needed.
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
|
The output for "track-at-once" instead of "disc-at-once" looks similar.
I am using CDRW media (Memorex); CD-R media in the past has worked fine.
Any ideas?
_________________
Personal overlay | Simple backup scheme |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
