| View previous topic :: View next topic |
| Author |
Message |
Black-Byte
n00b
Joined: 09 May 2003
Posts: 40
Location: Bremen (Germany)
|
 Posted: Thu Nov 22, 2007 11:33 am Post subject: Problems with Hauppauge HVR1300, Analog tuner doesn't work |
 |
|
Hi, i've a problem and doesn't know what now.
I'm using the Gentoo-Sources 2.6.23-r2 with the latest Sources from linuxtv howto
i don't get the tuner for analog working. DVB-T works but i need the analog one.
here are lsmod
| Code: |
Module Size Used by
ir_kbd_i2c 6992 0
tuner 29004 0
tea5767 5444 1 tuner
tda8290 11716 1 tuner
tda18271 10180 1 tda8290
tda827x 8836 1 tda8290
tuner_xc2028 13964 1 tuner
tda9887 8708 1 tuner
tuner_simple 7048 1 tuner
mt20xx 10888 1 tuner
tea5761 3972 1 tuner
cx22702 4932 0
bt865 3748 1
cx88_blackbird 14468 1
cx2341x 9988 1 cx88_blackbird
cx8800 26128 1 cx88_blackbird
cx8802 12804 1 cx88_blackbird
cx88_alsa 8968 0
cx88xx 54696 4 cx88_blackbird,cx8800,cx8802,cx88_alsa
ir_common 29700 2 ir_kbd_i2c,cx88xx
nvidia 4703056 22
em8300 58176 8
tveeprom 13264 1 cx88xx
videodev 23680 4 cx88_blackbird,cx8800,cx88xx
i2c_algo_bit 4932 2 cx88xx,em8300
i2c_viapro 6612 0
compat_ioctl32 960 1 cx8800
v4l1_compat 11588 1 videodev
v4l2_common 14656 6 tuner,cx88_blackbird,cx2341x,cx8800,cx88xx,videodev
videobuf_dma_sg 9540 5 cx88_blackbird,cx8800,cx8802,cx88_alsa,cx88xx
videobuf_core 13124 5 cx88_blackbird,cx8800,cx8802,cx88xx,videobuf_dma_sg
btcx_risc 3592 4 cx8800,cx8802,cx88_alsa,cx88xx
|
here is some dmesg out
| Code: | ...
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
tveeprom 3-0050: Hauppauge model 96019, rev D6D3, serial# 1815474
tveeprom 3-0050: MAC address is 00-0D-FE-1B-B3-B2
tveeprom 3-0050: tuner model is Philips FMD1216MEX (idx 133, type 4)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-0050: audio processor is CX882 (idx 33)
tveeprom 3-0050: decoder processor is CX882 (idx 25)
tveeprom 3-0050: has radio, has IR receiver, has IR transmitter
cx88[0]: hauppauge eeprom: model=96019
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0d.2[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:00:0d.2, rev: 5, irq: 21, latency: 32, mmio: 0xde000000
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 21, latency: 32, mmio: 0xdc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x blackbird driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: blackbird access: shared
cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
cx88[0]/2: registered device video1 [mpeg]
EXT3 FS on hda3, internal journal
i2c-adapter i2c-0: Transaction error!
tuner' 3-0061: chip found @ 0xc2 (cx88[0])
tuner' 3-0063: chip found @ 0xc6 (cx88[0])
input: i2c IR (CX2388x rem as /class/input/input5
ir-kbd-i2c: i2c IR (CX2388x rem detected at i2c-3/3-0071/ir0 [cx88[0]]
cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted
cx88[0]/2-bb: Firmware upload successful.
cx88[0]/2-bb: Firmware version is 0x02060039
tuner' 3-0061: tuner type not set
cx88[0]/2-bb: VIDIOC_S_FMT: w: 720, h: 576, f: 4
cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 576, f: 4
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
cx88[0]/2-bb: VIDIOC_S_FMT: w: 720, h: 576, f: 4
cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 576, f: 4
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
tuner' 3-0061: tuner type not set
adjusting scr: 7932556
|
the detection is right, i checked all with the hardware the tuner from eprom is also correct (FMD1216MEX)
i've tried to tune with tvtime but nothing. even if i send a video on svhs in i see only blue
cat /dev/video1 > test.mpg dosen't work only freezes the prozesss and creates a 0 byte file
_________________
Black-Byte |
|
| Back to top |
|
 |
Black-Byte
n00b
Joined: 09 May 2003
Posts: 40
Location: Bremen (Germany)
|
| Posted: Thu Nov 22, 2007 12:10 pm Post subject: |
|
|
Ok the tuner problem i've found a way
i only patched the linux/drivers/media/video/tveeprom.c
the line
| Code: | | { TUNER_ABSENT, "Philips FMD1216MEX"}, |
to
| Code: | | { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216MEX"}, |
now when i am trying to tune there are no tuner errors ...
| Code: | tveeprom 3-0050: tuner model is Philips FMD1216MEX (idx 133, type 63)
tuner' 3-0061: chip found @ 0xc2 (cx88[0])
tuner-simple 3-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner' 3-0063: chip found @ 0xc6 (cx88[0])
|
This hint i got here -> original
But i have allwas blue screen on tvtime and see nothing  just like before
I tryed a little bit ... looks like then blackbird doesn't work. if i send a signal to the svhs input i could see it with tvtime on /dev/video0
but tuner doesn't work and i found nothing yet with mpeg decoder...
_________________
Black-Byte |
|
| Back to top |
|
|
theotherjoe
Guru
Joined: 22 Nov 2003
Posts: 393
|
| Posted: Thu Nov 22, 2007 2:40 pm Post subject: |
|
|
what about mplayer?
something like
# mplayer tv:// -tvscan autostart
does it find any channels ? |
|
| Back to top |
|
|
Black-Byte
n00b
Joined: 09 May 2003
Posts: 40
Location: Bremen (Germany)
|
| Posted: Thu Nov 22, 2007 4:36 pm Post subject: |
|
|
hmm i'll tried a little bit .. with mplayer tv:// -tvscann autostart -tv driver=v4l2 he tries but i only get ?? at scann
_________________
Black-Byte |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Thu Nov 22, 2007 6:41 pm Post subject: |
|
|
| try kernel 2.6.20. I get much more scanning results in 2.6.20 than in 2.6.23. |
|
| Back to top |
|
|
Black-Byte
n00b
Joined: 09 May 2003
Posts: 40
Location: Bremen (Germany)
|
| Posted: Thu Nov 22, 2007 8:42 pm Post subject: |
|
|
Switch back to an old kernel is no way for me, and the drivers i use are not from the kernel so it makes no difference.
at the moment i'll try to get the mpeg encoder working. some days ago it gives me a noise back but after hdd crash and new install i got nothing it freezes the shell (cat/dev/video1 > test.mpg)
_________________
Black-Byte |
|
| Back to top |
|
|
Black-Byte
n00b
Joined: 09 May 2003
Posts: 40
Location: Bremen (Germany)
|
| Posted: Sat Nov 24, 2007 1:16 pm Post subject: |
|
|
D'oh .. i've forgotten an driver ... -> cx23885 was not loaded.
_________________
Black-Byte |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
