| View previous topic :: View next topic |
| Author |
Message |
NiceGuy
Guru
Joined: 12 Jun 2006
Posts: 451
Location: Canada
|
 Posted: Fri Nov 30, 2007 9:59 pm Post subject: How to translate lspci output to kernel config options?? |
 |
|
Hello,
I am not sure how to translate the information that lspci provides ... into understanding which module to configure/load/build.
For example: here is the lspci output for my HP DL320 G5 system:
| Code: |
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev c0)
Subsystem: Hewlett-Packard Company Unknown device 31f9
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev c0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=0
Memory behind bridge: fde00000-fdefffff
Capabilities: [40] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000050000000-0000000050000000
Capabilities: [40] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Capabilities: [40] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1000 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1020 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1040 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1060 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0, IRQ 17
Memory at fdbf0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00003fff
Memory behind bridge: fdc00000-fddfffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dff00000
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, medium devsel, latency 0
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 0500 [size=16]
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 31fe
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 1080 [size=8]
I/O ports at 1088 [size=4]
I/O ports at 1090 [size=8]
I/O ports at 1098 [size=4]
I/O ports at 10a0 [size=16]
Memory at fdbe0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 31fb
Flags: bus master, stepping, medium devsel, latency 64, IRQ 5
Memory at d8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 3305
Flags: medium devsel, IRQ 10
I/O ports at 2800 [size=256]
Memory at fdde0000 (32-bit, non-prefetchable) [size=512]
Capabilities: [f0] Power Management version 3
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 3305
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 3400 [size=256]
Memory at fddd0000 (32-bit, non-prefetchable) [size=2K]
Memory at fddc0000 (32-bit, non-prefetchable) [size=8K]
Memory at fdd00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at fdc20000 [disabled] [size=64K]
Capabilities: [f0] Power Management version 3
01:04.4 USB Controller: Hewlett-Packard Company Unknown device 3300 (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 3305
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at 3800 [size=32]
Capabilities: [f0] Power Management version 3
01:04.6 Class 0c07: Hewlett-Packard Company Unknown device 3302 (prog-if 01)
Subsystem: Hewlett-Packard Company Unknown device 3305
Flags: medium devsel, IRQ 10
Memory at fdcf0000 (32-bit, non-prefetchable) [size=256]
Capabilities: [f0] Power Management version 3
02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=03, subordinate=06, sec-latency=64
Memory behind bridge: fde00000-fdefffff
Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
Capabilities: [90] PCI-X bridge device
Capabilities: [b0] Power Management version 2
03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
Subsystem: Hewlett-Packard Company NC324i PCIe Dual Port Gigabit Server Adapter
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
Memory at fdee0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3)
Subsystem: Hewlett-Packard Company NC324i PCIe Dual Port Gigabit Server Adapter
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at fded0000 (64-bit, non-prefetchable) [size=64K]
Memory at fdec0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
03:08.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b4) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=03, secondary=04, subordinate=06, sec-latency=64
Capabilities: [90] PCI-X bridge device
07:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Hewlett-Packard Company NC360T PCI Express Dual Port Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fdfe0000 (32-bit, non-prefetchable) [size=128K]
Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 4000 [size=32]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint IRQ 0
07:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Hewlett-Packard Company NC360T PCI Express Dual Port Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at fdfa0000 (32-bit, non-prefetchable) [size=128K]
Memory at fdf80000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 4020 [size=32]
[virtual] Expansion ROM at 50020000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint IRQ 0 |
I apologize for the confusion ... and the lengthy post .. just need some clarity
Thanks again
_________________
success is the ability to go from one failure to the next without any loss of enthusiasm |
|
| Back to top |
|
 |
NathanZachary
Moderator
Joined: 30 Jan 2007
Posts: 2609
|
| Posted: Sat Dec 01, 2007 1:19 am Post subject: |
|
|
The best way is to use the help command (by pressing ? while on a kernel option). That way, you will learn which things to compile into your kernel and what is unnecessary. Although, I believe this brief wiki article will give you the kernel modules that you need to include which are not included by default:
http://gentoo-wiki.com/HARDWARE_HP_ProLiant_DL320_G4
Hope that helps.
_________________
“Truth, like infinity, is to be forever approached but never reached.” --Jean Ayres (1972)
---avatar cropped from =AimanStudio--- |
|
| Back to top |
|
|
nixnut
Bodhisattva
Joined: 09 Apr 2004
Posts: 10974
Location: the dutch mountains
|
| Posted: Sat Dec 01, 2007 5:21 pm Post subject: |
|
|
Moved from Installing Gentoo to Kernel & Hardware.
Hardware & Kernel question, so moved here.
_________________
Please add [solved] to the initial post's subject line if you feel your problem is resolved. Help answer the unanswered
talk is cheap. supply exceeds demand |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
