| View previous topic :: View next topic |
| Author |
Message |
SiRuS
n00b
Joined: 05 Sep 2006
Posts: 45
Location: California,USA
|
 Posted: Thu Dec 13, 2007 8:57 am Post subject: Ntop segmentation fault |
 |
|
I am trying to get some network monitoring set up using ntop but unfortunately I do not know why ntop is running a segmentation fault.
Here is the output from ntop:
| Code: |
Thu Dec 13 00:51:32 2007 NOTE: Interface merge enabled by default
Thu Dec 13 00:51:32 2007 Initializing gdbm databases
Thu Dec 13 00:51:32 2007 ntop will be started as user nobody
Thu Dec 13 00:51:32 2007 ntop v.3.3
Thu Dec 13 00:51:32 2007 Configured on Dec 13 2007 0:36:03, built on Dec 13 2007 00:37:21.
Thu Dec 13 00:51:32 2007 Copyright 1998-2007 by Luca Deri <deri@ntop.org>
Thu Dec 13 00:51:32 2007 Get the freshest ntop from http://www.ntop.org/
Thu Dec 13 00:51:32 2007 NOTE: ntop is running from 'ntop'
Thu Dec 13 00:51:32 2007 NOTE: (but see warning on man page for the --instance parameter)
Thu Dec 13 00:51:32 2007 NOTE: ntop libraries are in '/usr/lib'
Thu Dec 13 00:51:32 2007 Initializing ntop
Thu Dec 13 00:51:32 2007 Checking eth0 for additional devices
Thu Dec 13 00:51:32 2007 Resetting traffic statistics for device eth0
Thu Dec 13 00:51:32 2007 Initializing device eth0 (0)
Thu Dec 13 00:51:32 2007 DLT: Device 0 [eth0] is 1, mtu 1514, header 14
Thu Dec 13 00:51:32 2007 Initializing gdbm databases
Thu Dec 13 00:51:32 2007 VENDOR: Loading MAC address table.
Thu Dec 13 00:51:32 2007 VENDOR: Checking for MAC address table file
Thu Dec 13 00:51:32 2007 VENDOR: File '/etc/ntop/specialMAC.txt.gz' does not need to be reloaded
Thu Dec 13 00:51:32 2007 VENDOR: ntop continues ok
Thu Dec 13 00:51:32 2007 VENDOR: Checking for MAC address table file
Thu Dec 13 00:51:32 2007 VENDOR: File '/etc/ntop/oui.txt.gz' does not need to be reloaded
Thu Dec 13 00:51:32 2007 VENDOR: ntop continues ok
Thu Dec 13 00:51:32 2007 Fingerprint: Loading signature file
Thu Dec 13 00:51:32 2007 Fingerprint: Checking for Fingerprint file... file
Thu Dec 13 00:51:32 2007 Fingerprint: Loading file '/etc/ntop/etter.finger.os.gz'
Thu Dec 13 00:51:32 2007 Fingerprint: ...loaded 1765 records
Thu Dec 13 00:51:32 2007 ASN: Checking for Autonomous System Number table file
Thu Dec 13 00:51:32 2007 **WARNING** ASN: Unable to open file 'AS-list.txt'
Thu Dec 13 00:51:32 2007 I18N: Default language (from ntop host) is unspecified
Segmentation fault
|
Its probably something very small but I just cannot figure it out...
Sincerely,
Sirus
Last edited by SiRuS on Wed Jan 16, 2008 5:53 am; edited 1 time in total |
|
| Back to top |
|
 |
Veldrin
Veteran
Joined: 27 Jul 2004
Posts: 1945
Location: Zurich, Switzerland
|
| Posted: Thu Dec 13, 2007 9:39 am Post subject: |
|
|
I don't know the program... but I standard procedure seems in order: emerge --info, and some config-files plz
cheers
V. |
|
| Back to top |
|
|
SiRuS
n00b
Joined: 05 Sep 2006
Posts: 45
Location: California,USA
|
| Posted: Wed Jan 16, 2008 5:56 am Post subject: |
|
|
Here is some updated info:
/etc/conf.d/ntop
| Code: |
# Config file for /etc/init.d/ntop
# Set preferred options here
#NTOP_OPTS="--http-server 3000 --https-server 0 --interface eth0,eth1"
# suggestions from bug #136983 (use it in case you experience ntop hangs)
#NTOP_OPTS="u ntop -P /var/lib/ntop --disable-schedyield --http-server 3000 --https-server 3001"
NTOP_OPTS="-u ntop -P /var/lib/ntop --http-server 3000 --https-server 0 --interface eth0,eth1"
|
emerge --info
| Code: | Portage 2.1.3.19 (default-linux/x86/2007.0, gcc-4.1.1, glibc-2.5-r0, 2.6.23-gentoo-r3 i686)
=================================================================
System uname: 2.6.23-gentoo-r3 i686 AMD Athlon(tm) XP 1500+
Timestamp of tree: Wed, 16 Jan 2008 03:30:01 +0000
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [enabled]
app-shells/bash: 3.2_p17
dev-lang/python: 2.4.4-r6
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.9
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.61
sys-devel/automake: 1.10
sys-devel/binutils: 2.16.1-r3
sys-devel/gcc-config: 1.3.14
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.17-r2
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distcc distlocks metadata-transfer parallel-fetch sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://distro.ibiblio.org/pub/linux/distributions/gentoo/ "
LANG="en_US ISO-8859-1"
LC_ALL="en_US ISO-8859-1"
LINGUAS="en"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext acl berkdb bitmap-fonts cli cracklib crypt cups dri fortran gdbm gpm iconv ipv6 isdnlog midi mmx mudflap ncurses nls nptl nptlonly openmp pam pcre perl pppd python readline reflection session spl sse ssl tcpd truetype-fonts type1-fonts unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint i128 i740 i810 imstt mach64 mga neomagic nsc nv r128 radeon rendition s3 s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa vga via vmware voodoo"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
|
Something with ntop is not configured properly... |
|
| Back to top |
|
|
loopx
Advocate
Joined: 01 Apr 2005
Posts: 2787
Location: Belgium / Liège
|
| Posted: Wed Dec 03, 2008 8:30 am Post subject: |
|
|
I got a segfault too ... and I don't know what to do 
Version 3.2.x is working but is realy old and the new 3.3.x are all segfault.
I've tried 3 versions : one worked for me, the old one :s
ntop-3.2-r3.ebuild ntop-3.3.6.ebuild ntop-3.3.8.ebuild
I've opened a thread (french section) : https://forums.gentoo.org/viewtopic-p-5298677.html#5298677
_________________
Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
| Back to top |
|
|
col
l33t
Joined: 08 May 2002
Posts: 820
Location: Melbourne - Australia
|
| Posted: Sun Jan 04, 2009 10:22 pm Post subject: |
|
|
yeah it is segfaulting for me to.....
edit: install version 3.3.8 which seems to work
None of the RRD directory structure existed. You will have to manually create it & set permissions. (see your ntop logs) |
|
| Back to top |
|
|
Napalm Llama
Guru
Joined: 04 Jun 2005
Posts: 533
Location: Cardiff, UK
|
| Posted: Mon Jan 05, 2009 10:04 pm Post subject: |
|
|
I suggest you have a look in Gentoo's Bugzilla for this. If you can't find anything, file a new bug. Don't forget to specify the exact sequence of steps needed to trigger this bug, and also give them your emerge --info .
_________________
Ryzen 5600x; Asus TUF Gaming B550-Plus; Geforce 1660 Super
Registered Linux User #381314
# killall humans |
|
| Back to top |
|
|
|
Networking & Security
