| View previous topic :: View next topic |
| Author |
Message |
thelinuxfr
Tux's lil' helper
Joined: 15 Oct 2006
Posts: 122
Location: FRANCE (Orleans 45)
|
 Posted: Mon Dec 17, 2007 6:03 pm Post subject: [Configuration] Pulseaudio besoin d'aide ! |
 |
|
Bonsoir,
Je voulais tester Pulseaudio dont on parle beaucoup depuis peux. J'ai donc installé la dernière version stable dans portage pulseaudio-0.9.7 avec les petits outils pour gérer tous ça. Jusque là pas de problème. C'est après que ça ce complique.
Une fois compilé j'ai été comme dit sur http://www.pulseaudio.org/wiki/PerfectSetup pour ajouter dans :
/etc/pulse/default.pa
| Code: | load-module module-esound-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16
load-module module-zeroconf-publish |
J'ai essayé avec chacune des lignes rien à faire /etc/init.pulseaudio start ne démarre pas
J'ai aussi ajouté mon user dans pulse, pulse-access et realtime. Après j'ai essayé de forcer les choses avec toujours dans default.pa :
| Code: | load-module module-alsa-sink device=hw:0
load-module module-alsa-source device=hw:0 |
et
| Code: | load-module module-alsa-sink device=hw:0,1
load-module module-alsa-source device=hw:0,1 |
En tapant simplement pulseaudio j'obtiens respectivement :
| Code: | W: main.c: This program is not intended to be run as root (unless --system is specified).
W: alsa-util.c: Device hw:0 doesn't support 44100 Hz, changed to 48000 Hz.
W: alsa-util.c: Cannot find mixer control "Master".
W: alsa-util.c: Cannot find fallback mixer control "PCM".
W: alsa-util.c: Cannot find mixer control "Capture".
E: module-alsa-sink.c: Error opening PCM device hw:0: Périphérique ou ressource occupé
E: module.c: Failed to load module "module-alsa-sink" (argument: "device=hw:0 sink_name=alsa_output.pci_1102_7_alsa_playback_0"): initialization failed.
E: module-alsa-source.c: Error opening PCM device hw:0: Périphérique ou ressource occupé
E: module.c: Failed to load module "module-alsa-source" (argument: "device=hw:0 source_name=alsa_input.pci_1102_7_alsa_capture_0"): initialization failed.
Welcome to PulseAudio! Use "help" for usage information.
>>> |
| Code: |
W: main.c: This program is not intended to be run as root (unless --system is specified).
W: alsa-util.c: Device hw:0,1 doesn't support 44100 Hz, changed to 48000 Hz.
ALSA lib conf.c:3840:(parse_args) Unknown parameter 1
ALSA lib conf.c:3966:(snd_config_expand) Parse arguments error: Aucun fichier ou répertoire de ce type
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0,1
W: alsa-util.c: Unable to attach to mixer hw:0,1: Aucun fichier ou répertoire de ce type
ALSA lib conf.c:3840:(parse_args) Unknown parameter 1
ALSA lib conf.c:3966:(snd_config_expand) Parse arguments error: Aucun fichier ou répertoire de ce type
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0,1
W: alsa-util.c: Unable to attach to mixer hw:0,1: Aucun fichier ou répertoire de ce type
W: alsa-util.c: Device hw:0 doesn't support 44100 Hz, changed to 48000 Hz.
W: alsa-util.c: Cannot find mixer control "Master".
W: alsa-util.c: Cannot find fallback mixer control "PCM".
W: alsa-util.c: Cannot find mixer control "Capture".
Welcome to PulseAudio! Use "help" for usage information.
>>> |
Et avec le fichier par défaut:
| Code: | W: main.c: This program is not intended to be run as root (unless --system is specified).
W: alsa-util.c: Device hw:0 doesn't support 44100 Hz, changed to 48000 Hz.
W: alsa-util.c: Cannot find mixer control "Master".
W: alsa-util.c: Cannot find fallback mixer control "PCM".
W: alsa-util.c: Cannot find mixer control "Capture". |
J'ai aussi ajouté dans ~/.asoundrc:
| Code: | pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
} |
Voilà je ne sais plus trop quoi faire à partir d'ici si quelqu'un pouvait m'aider SVP 
| Code: |
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
.fail
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
load-module module-alsa-sink device=hw:0
load-module module-alsa-source device=hw:0
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:0,1
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists /usr/lib/pulse-0.9/modules//module-hal-detect.so
load-module module-hal-detect
.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
load-module module-detect
.endif
### Load several protocols
load-module module-esound-protocol-unix
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
#load-module module-esound-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16
load-module module-zeroconf-publish
### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor
### Automatically restore the volume of playback streams
load-module module-volume-restore
### Automatically restore the default sink/source when changed by the user during runtime
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Load X11 bell module
load-module module-x11-bell sample=x11-bell
### Publish connection data in the X11 root window
.ifexists /usr/lib/pulse-0.9/modules//module-x11-publish.so
load-module module-x11-publish
.endif
### Register ourselves in the X11 session manager
# Deactivated by default, to avoid deadlock when PA is started as esd from gnome-session
# Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
# load-module module-x11-xsmp
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists /usr/lib/pulse-0.9/modules//module-gconf.so
load-module module-gconf
.endif
### Make some devices default
#set-default-sink output
#set-default-source input
# Load the CLI module
load-module module-cli
|
_________________
TheLinuxFr.Org
Blog: http://thelinuxfr.org/
Ebuild Gentoo: http://overlays.thelinuxfr.org/ |
|
| Back to top |
|
 |
NEOxAKIRA
Guru
Joined: 20 May 2007
Posts: 302
Location: France
|
| Posted: Sat Jan 05, 2008 2:35 pm Post subject: |
|
|
Moi j'arrive pas à lancer le deamon...
| Code: | Jan 5 16:03:35 Genova pulseaudio[25865]: pid.c: Stale PID file, overwriting.
Jan 5 16:03:35 Genova pulseaudio[25865]: shm.c: shm_open() failed: Permission non accordée
Jan 5 16:03:35 Genova pulseaudio[25865]: core.c: failed to allocate shared memory pool. Falling back to a normal memory pool.
Jan 5 16:03:35 Genova pulseaudio[25865]: alsa-util.c: Cannot find mixer control "Capture".
Jan 5 16:03:35 Genova pulseaudio[25865]: x11wrap.c: XOpenDisplay() failed
Jan 5 16:03:35 Genova pulseaudio[25865]: module.c: Failed to load module "module-x11-publish" (argument: ""): initialization failed.
Jan 5 16:03:35 Genova pulseaudio[25865]: main.c: Module load failed.
Jan 5 16:03:35 Genova pulseaudio[25865]: main.c: failed to initialize daemon.
Jan 5 16:03:35 Genova pulseaudio[25864]: main.c: daemon startup failed.
Jan 5 16:03:35 Genova rc-scripts: ERROR: pulseaudio failed to start |
|
|
| Back to top |
|
|
thelinuxfr
Tux's lil' helper
Joined: 15 Oct 2006
Posts: 122
Location: FRANCE (Orleans 45)
|
| Posted: Mon Jan 07, 2008 6:38 pm Post subject: |
|
|
Bonsoir,
J'ai réussi à faire marcher ça je sais pas trop comment mais bon :p
Ajout des groupes suivant à mon user:
| Code: | | 452(realtime),453(pulse-access),454(pulse) |
Dans ~/.asoundrc:
| Code: | pcm.!default {
type pulse
}
ctl.!default {
type pulse
} |
Dans /etc/conf.d/pulseaudio:
| Code: | | PA_OPTS="--log-target=syslog --disallow-module-loading=0" |
J'ai modifié le 1 par 0.
Puis dans /etc/pulse/default.pa:
| Code: | ### Publish connection data in the X11 root window
#.ifexists /usr/lib/pulse-0.9/modules//module-x11-publish.so
#load-module module-x11-publish
#.endif |
J'ai commenté ces lignes car pulse ne démarré pas. Comme toi NEOxAKIRA
A ce niveau on peux tester si tout ce passe bien en exécutant:
Sous root. S'il n'y a pas d'erreurs et si la cartes son est bien détectée on peut espérer que le demon démarre :p
Sinon on peut essayer avec ça:
| Code: | load-module module-alsa-sink device=hw:0
load-module module-alsa-source device=hw:0 |
Et voili chez moi ça marche impec  . J'espère que ça pourra en aider certains :p
_________________
TheLinuxFr.Org
Blog: http://thelinuxfr.org/
Ebuild Gentoo: http://overlays.thelinuxfr.org/ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
