View previous topic :: View next topic |
Author |
Message |
RalfW n00b
Joined: 02 Jan 2008 Posts: 3
|
Posted: Wed Jan 02, 2008 12:54 pm Post subject: Tastaurproblem unter X Alles wird 30 x wiederholt. |
|
|
Ich suche schon seit Tagen nach einer Lösung, komme aber absolut nicht weiter. Wenn ich unter X z.b. D drücke kommt D pause DDDDDDDDDDDDDDDDDDDD
Ich finde aber nicht mal einen Lösungsanstaz wo ich suchen soll. Ich habe reichlich mit den AutoRepeat Parameter rumgespielt. Alles was ich erreicht habe, ist das es mall schneller und mal langsamer geht.
Dann mal noch meine xorg.conf
Code: |
Section "ServerLayout"
Identifier "X.Org Configured"
Screen 0 "Screen0" 0 0
InputDevice "KeyboardDe" "CoreKeyboard"
InputDevice "PS/2 Mouse" "AlwaysCore"
# Serial Mouse not detected
# USB Mouse not detected
#No Synaptics touchpad found
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts/default"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/arphicfonts"
FontPath "/usr/share/fonts/jisx0213"
FontPath "/usr/share/fonts/shinonome"
FontPath "/usr/share/fonts/baekmuk-fonts"
FontPath "/usr/share/fonts/kacst-fonts"
FontPath "/usr/share/fonts/sgi-fonts"
FontPath "/usr/share/fonts/unfonts"
FontPath "/usr/share/fonts/default/ghostscript"
FontPath "/usr/share/fonts/xfonts-cronyx-100dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-75dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-misc:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-100dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-75dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-misc"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-100dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-75dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-misc:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-100dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-75dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-cp1251-misc"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-100dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-75dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-misc:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-100dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-75dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-isocyr-misc"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-100dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-75dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-misc:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-100dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-75dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8r-misc"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-100dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-75dpi:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-misc:unscaled"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-100dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-75dpi"
FontPath "/usr/share/fonts/xfonts-cronyx-koi8u-misc"
EndSection
Section "Module"
Load "ddc"
Load "vbe"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
# Option "XkbOptions" "grp:toggle,grp_led:scroll"
Option "XkbVariant" ",winkeys"
Option "XkbLayout" ""
EndSection
#Section "InputDevice"
# Identifier "Serial Mouse"
# Driver "mouse"
# Option "Protocol" "Microsoft"
# Option "Device" "/dev/ttyS0"
# Option "Emulate3Buttons" "true"
# Option "Emulate3Timeout" "70"
# Option "SendCoreEvents" "true"
#EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/misc/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
Option "ZAxisMapping" "4 5"
EndSection
#Section "InputDevice"
# Identifier "USB Mouse"
# Driver "mouse"
# Option "Device" "/dev/input/mice"
# Option "SendCoreEvents" "true"
# Option "Protocol" "IMPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Buttons" "5"
#EndSection
#Section "InputDevice"
# Identifier "Synaptics"
# Driver "synaptics"
# Option "Protocol" "event"
# Option "Device" ""
# Option "LeftEdge" "1900"
# Option "RightEdge" "5400"
# Option "TopEdge" "1900"
# Option "BottomEdge" "4000"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.02"
# Option "MaxSpeed" "0.10"
# Option "AccelFactor" "0.0010"
# Option "SHMConfig" "on"
#EndSection
# Auto-generated by mkxf86config
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by x11-misc/mkxf86config
Driver "nvidia"
#"vesa"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "InputDevice"
Identifier "KeyboardDe"
Driver "keyboard"
Option "AutoRepeat" "250 1"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "KeyboardUS"
Driver "keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "RandR" "on"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
|
Jetzt will ich mal hoffen, das mir hier jemand helfen kann
Gruss
Ralf |
|
Back to top |
|
|
musv Advocate
Joined: 01 Dec 2002 Posts: 3359 Location: de
|
Posted: Wed Jan 02, 2008 2:15 pm Post subject: |
|
|
Zumindest die Problembeschreibung kommt mir bekannt vor:
https://forums.gentoo.org/viewtopic-t-587720.html
Bei mir lags damals an Kernel-2.6.22. Bis einschließlich 2.6.21 gabs keine Probleme, und ab 2.6.23 funktionierts auch wieder problemlos.
Um den Fehlerraum noch etwas einzugrenzen:
Auf meinem Notebook (Pentium3) hatte ich die Probleme nicht. Nur auf meinem AthlonXP.
Ursache könnte das "Tickless System (Dynamic Ticks)" sein. Siehe dazu hier:
http://de.gentoo-wiki.com/Kernel_manuell_kompilieren/x86_2.6.22-gentoo#Processor_type_and_features
Bei 2.6.23 hab ich's allerdings aktiviert und hab keine Probleme damit.
Lösungsansätze:
Wenn du 2.6.22 fährst, dann Update auf 2.6.23.
Im Bios mit den "keyboard repeat"-Werten etwas rumspielen. |
|
Back to top |
|
|
RalfW n00b
Joined: 02 Jan 2008 Posts: 3
|
Posted: Wed Jan 02, 2008 2:57 pm Post subject: |
|
|
Hallo musv
Danke für die Links,
da ich kernel 2.6.23 habe, habe ich einfach die Tastatur von meinem anderen Rechner genommen.
Siehe da es geht.
Da ich in der Console keine Probleme habe, wäre ich da nie drauf gekommen, das es an der Tastatur liegen könnte.
Danke und Gruss
Ralf |
|
Back to top |
|
|
ChrisJumper Advocate
Joined: 12 Mar 2005 Posts: 2396 Location: Germany
|
Posted: Wed Jan 02, 2008 4:29 pm Post subject: |
|
|
Hi RalfW!
Sagmal verwendest du eine Kabellose Tastatur?
Ich hatte ähnliche Probleme einmal mit einer Funktastatur.. und sie funktionierte bei mir nicht.. wohl aber bei einem Freund (ich hab sie irgendwann verschenkt). Nichts ist schlimmer als wenn man mit 10 Finger tippt und man "vertippt" sich immer.
Bei mir waren es (im Nachhinein betrachtet) wohl Komplikationen bei der Funkübertragung, mit anderen Geräten.
Grüße |
|
Back to top |
|
|
RalfW n00b
Joined: 02 Jan 2008 Posts: 3
|
Posted: Wed Jan 02, 2008 5:04 pm Post subject: |
|
|
Hallo Chris
ja ich verwende eine Funktastatur.
Gruss
Ralf |
|
Back to top |
|
|
|