| View previous topic :: View next topic |
| Author |
Message |
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
 Posted: Mon Jul 07, 2003 5:09 pm Post subject: TwinView failures (stumped) |
 |
|
Ok, after reading the Nvidia FAQ, and browsing these forums, I must have tried about 30 different possibilities and spent at least 10 hours trying to get this to work with no luck. I have a Chaintech GeForce4 Ti4200 card that I want to feed both my 14" CRT and my TV. I have successfully been able to output video to both separately, but not at the same time. When trying different possibilities with Twinview, I can ONLY get video output on the TV, and the CRT remains blank. Below are the applicable parts of my XF86Config.
| Code: |
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-48
VertRefresh 50-100
EndSection
Section "Device"
Identifier "Ti4200"
Driver "nvidia"
Option "NoLogo" "True"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,null;null,800x600;1024x768,1024x768;800x600,800x600"
Option "TwinViewOrientation" "Clone"
Option "ConnectedMonitor" "CRT,TV"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Ti4200"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
#Option "backingstore"
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
|
|
| Back to top |
|
 |
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Mon Jul 07, 2003 5:27 pm Post subject: Almost forgot.... |
|
|
Here is the output from my XFree86.0.log when I try the above configuration (sorry for posting the whole thing, I hope it doesn't piss anyone off):
| Code: |
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gaming-r1 i686 [ELF]
Build Date: 22 April 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 7 13:23:03 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Ti4200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "logicordless"
(**) XKB: model: "logicordless"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/
:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/
,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80001044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0735 card 0000,0000 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:02:2: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:3: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:02:7: chip 1039,7012 card 1019,0a14 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,0900 card 1019,0a14 rev 90 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 1106,3065 card 1186,1400 rev 43 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0253 card 0000,0000 rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xcde00000 - 0xcfefffff (0x2100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbdb00000 - 0xcdcfffff (0x10200000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200]
rev 163, Mem @ 0xce000000/24, 0xc0000000/27,
0xcdc80000/19, BIOS @ 0xcfee0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[1] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[2] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[3] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[5] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[6] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[7] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[1] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[2] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[3] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[5] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[6] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[7] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[6] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[11] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4363
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4363
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-4363 Sat Apr 19 17:49:42 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[6] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[11] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[6] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[11] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[21] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[23] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(--) NVIDIA(0): Linear framebuffer at 0xC0000000
(--) NVIDIA(0): MMIO registers at 0xCE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200
(--) NVIDIA(0): VideoBIOS: 04.25.00.36.00
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1, TV-0
(--) NVIDIA(0): Detected TV Encoder: Philips 7102
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NVIDIA(0): Monitor0: Using hsync range of 31.00-48.00 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "400x300" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (hsync out of range)
(II) NVIDIA(0): Not using default mode "416x312" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (250, 190) mm
(--) NVIDIA(0): DPI set to (104, 102)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B]
[1] 0 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] 0 0 0xce000000 - 0xceffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xcfffcf00 - 0xcfffcfff (0x100) MX[B]
[9] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[10] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B]
[11] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[14] -1 0 0xcdc80000 - 0xcdcfffff (0x80000) MX[B](B)
[15] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[23] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[24] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[26] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) [GLX]: Initializing GLX extension
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "Resolution" "1200"
(**) Mouse1: Resolution: 1200
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
|
|
|
| Back to top |
|
|
Seoushi
Tux's lil' helper
Joined: 04 Feb 2003
Posts: 117
Location: Salt Lake City
|
| Posted: Mon Jul 07, 2003 10:42 pm Post subject: |
|
|
I'm just using dual monitors.. haven't used my tv out yet but one thing I did notice is that you don't have a boolean after twinview.. it should be
| Code: | | Option "TwinView" "true" |
hopefully that works.
_________________
-Seoushi |
|
| Back to top |
|
|
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Mon Jul 07, 2003 11:24 pm Post subject: Tried it... |
|
|
Yeah, I went through a few combinations in my early struggles. I tried:
Option "TwinView" "True"
Option "TwinView" "1"
and then just
Option "TwinView"
All did the same thing. TV works on it's own, monitor is blank. |
|
| Back to top |
|
|
Peach
Advocate
Joined: 08 Mar 2003
Posts: 3686
Location: London, UK
|
| Posted: Mon Jul 07, 2003 11:54 pm Post subject: |
|
|
as you already noticed on your XFree86.0.log
| Code: | (WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
|
that is the same problem I have... only nvtv can give me a chance to use both, but unfortunately there's no PAL-B/G in it so I can't use it, apart from b/n 
try to use that
| Code: | # emerge -p nvtv
...
# emerge nvtv |
hope it can help you
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom |
|
| Back to top |
|
|
nameless
n00b
Joined: 17 Jun 2003
Posts: 12
|
| Posted: Tue Jul 08, 2003 8:20 am Post subject: |
|
|
I'm using a CRT and a TV with PAL, and it works fine with my GeForce4, the only different to your configuration I noticed was:
your config file:
| Code: | Option "ConnectedMonitor" "CRT,TV"
Option "TVStandard" "NTSC-M"
|
I use
| Code: | Option "ConnectedMonitor" "TV"
Option "TVStandard" "PAL-B"
|
my MetaModes:
| Code: | Option "MetaModes" "1600x1200, 800x600; 1600x1200, 1024x768; 1200x1024 800x600; 1024x768 800x600; 800x600, 800x600; 640x480, 640x480"
|
hope this will help you |
|
| Back to top |
|
|
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Tue Jul 08, 2003 6:11 pm Post subject: Nope, but.... |
|
|
No, I tried all of the above with no luck. I still get the error in my XFree86.0.log "Two displays detected, but only one display allowed". However, after reading over the Nvidia FAQ, i came across a possible solution and I tried the following and was able to get two separate screens set up on both displays at once, but, one is not a clone of the other. They look like two different X sessions. Maybe someone with a little more knowledge can take a look at what I did and modify it to work as a clone, because I no longer have any faith in getting the regular TwinView Clone option to work.
| Code: |
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-48
VertRefresh 50-100
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "PTS"
ModelName "3da"
HorizSync 30.0 - 50.0
VertRefresh 60
EndSection
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
VendorName "NVidia"
BoardName "GeForce2 MX"
BusID "PCI:1:0:0"
Option "NvAGP" "1"
Option "ConnectedMonitor" "TV"
Option "TVStandard" "NTSC-M"
Screen 1
EndSection
Section "Device"
Identifier "nvidia0"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "nvidia0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "nvidia1"
Monitor "Monitor1"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen 0 "Screen0"
Screen 1 "Screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
|
|
| Back to top |
|
|
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Tue Jul 08, 2003 7:48 pm Post subject: It's working??????? |
|
|
Ok, those who are having the same problem as me are now going to kill me. After finally giving up on trying to get this to work, I loaded up X using the EXACT same XF86Config file as I posted at the beginning just to get a verbose XFree86.0.log and much to my surprise, it worked! Now whenever I load up X, I get output on both my monitor and my TV (depending on which MetaMode I choose).
So you're probably saying to yourself <great, now what am I supposed to do?> Well, the only suggestion I have is to try what I did to get it working, simply load X using the following command
| Code: |
startx -- -logverbose 5
|
Oh, and while I'm now not using the EXACT same XF86Config as posted above, feel free to try the one I am using now:
| Code: | Section "dri"
Mode 0666
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "logicordless"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
# Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "1200"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-48
VertRefresh 50-100
EndSection
Section "Device"
Identifier "Ti4200"
Driver "nvidia"
Option "NoLogo" "True"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,;1024x768,1024x768;1024x768,800x600;,800x600;800x600,800x600"
Option "TwinViewOrientation" "Clone"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Ti4200"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
#Option "backingstore"
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
