| View previous topic :: View next topic |
| Author |
Message |
josedb
Apprentice
Joined: 03 Nov 2006
Posts: 222
|
 Posted: Tue Feb 19, 2008 2:22 pm Post subject: WLAN Kernel 2.6.24-r2 notworking |
 |
|
i tried kernel modules, and madwifi-ng with no luck
| Code: | dhcppc0 ~ # lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
03:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
|
| Code: |
dhcppc0 ~ # lsmod
Module Size Used by
snd_pcm_oss 34592 0
snd_mixer_oss 13376 1 snd_pcm_oss
snd_seq_oss 28416 0
snd_seq_midi_event 4928 1 snd_seq_oss
snd_seq 41856 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 5396 2 snd_seq_oss,snd_seq
nvidia 8838276 26
snd_hda_intel 356312 1
snd_pcm 57544 2 snd_pcm_oss,snd_hda_intel
snd_timer 16776 2 snd_seq,snd_pcm
snd_page_alloc 7120 2 snd_hda_intel,snd_pcm
snd_hwdep 6856 1 snd_hda_intel
snd 41352 11 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore 7392 1 snd
ath_pci 77808 0
wlan 160288 1 ath_pci
ath_hal 214448 1 ath_pci |
| Code: | dhcppc0 ~ # dmesg
Linux version 2.6.24-gentoo-r2 (root@dhcppc0) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #15 SMP PREEMPT Tue Feb 19 11:15:36 ART 2008
Command line: root=/dev/sda3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077f50000 (usable)
BIOS-e820: 0000000077f50000 - 0000000077f65000 (ACPI data)
BIOS-e820: 0000000077f65000 - 0000000077f66000 (ACPI NVS)
BIOS-e820: 0000000077f66000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 491344) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
ACPI: XSDT 77F5C0FB, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 77F649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
ACPI: DSDT 77F5C167, 87DF (r1 NVIDIA MCP67 6040000 MSFT 3000000)
ACPI: FACS 77F65FC0, 0040
ACPI: TCPA 77F64AAE, 0032 (r1 Phoeni x 6040000 TL 0)
ACPI: SRAT 77F64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
ACPI: SSDT 77F64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: MCFG 77F64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: HPET 77F64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC 77F64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 77F64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 77F64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
ACPI: DMI detected: Hewlett-Packard
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 158) 1 entries of 3200 used
Entering add_active_range(0, 256, 491344) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000077f50000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 158
0: 256 -> 491344
On node 0 totalpages: 491246
DMA zone: 56 pages used for memmap
DMA zone: 2319 pages reserved
DMA zone: 1623 pages, LIFO batch:0
DMA32 zone: 6661 pages used for memmap
DMA32 zone: 480587 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 29984 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 482210
Policy zone: DMA32
Kernel command line: root=/dev/sda3
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2000.186 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
CPU 0: aperture @ b348000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1928388k/1965376k available (5013k kernel code, 36596k reserved, 2799k data, 352k init)
Calibrating delay using timer specific routine.. 4003.44 BogoMIPS (lpj=2001723)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12501179
Detected 12.501 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=2000193)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
AMD C1E detected late. Force timer broadcast.
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e04fffff
PCI: No mmconfig possible on device 00:18
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Time: hpet clocksource has been installed.
ACPI: RTC can wake from S4
system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:03: ioport range 0x1000-0x107f has been reserved
system 00:03: ioport range 0x1080-0x10ff has been reserved
system 00:03: ioport range 0x1400-0x147f has been reserved
system 00:03: ioport range 0x1480-0x14ff has been reserved
system 00:03: ioport range 0x1800-0x187f has been reserved
system 00:03: ioport range 0x1880-0x18ff has been reserved
system 00:04: ioport range 0x360-0x361 has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
system 00:0b: iomem range 0x0-0x0 could not be reserved
system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: f6100000-f61fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 4000-4fff
MEM window: f2000000-f3ffffff
PREFETCH window: f0000000-f1ffffff
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: f6000000-f60fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:12.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1b:24:fc:04:93
forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k
ipw2200: Copyright(c) 2003-2006 Intel Corporation
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
orinoco_tmd 0.15 (Joerg Dorchain <joerg@dorchain.net>)
orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
Loaded prism54 driver, version 1.2
bcm43xx driver
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver usb8xxx
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP67: IDE controller (0x10de:0x0560 rev 0xa1) at PCI slot 0000:00:06.0
NFORCE-MCP67: not 100% native mode: will probe irqs later
NFORCE-MCP67: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP67: 0000:00:06.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0x30c0-0x30c7, BIOS settings: hda:DMA, hdb:pio
NFORCE-MCP67: IDE port disabled
Probing IDE interface ide0...
hda: TSSTcorp CDDVDW TS-L632N, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 381
ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 381
ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 381
ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 381
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHY2250BH, 890B, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2250B 890B PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 7 ports detected
ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
usb 2-2: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
rtc_cmos: probe of 00:07 failed with error -16
pc87360: PC8736x not detected, module not inserted.
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
input: A4Tech PS/2+USB Mouse as /class/input/input5
input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b005869a300]
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input6
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 352k freed
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.9.4
ath_pci: 0.9.4
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:12.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008
EXT3 FS on sda3, internal journal
Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k
eth0: no IPv6 routers present
Clocksource tsc unstable (delta = -299909291 ns) |
dhcppc0 ~ # emerge --info
Portage 2.1.4.4 (default-linux/amd64/2007.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.24-gentoo-r2 x86_64)
=================================================================
System uname: 2.6.24-gentoo-r2 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-60
Timestamp of tree: Sun, 17 Feb 2008 09:30:01 +0000
app-shells/bash: 3.2_p17-r1
dev-lang/python: 2.4.4-r6
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.9
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.13, 2.61-r1
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.18-r1
sys-devel/gcc-config: 1.3.14
sys-devel/libtool: 1.5.24
virtual/os-headers: 2.6.17-r2
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -march=athlon64 -pipe -fweb -frename-registers -funswitch-loops -fgcse-after-reload "
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=athlon64 -pipe -fweb -frename-registers -funswitch-loops -fgcse-after-reload "
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer parallel-fetch sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.localhost.net.ar/ ftp://mirrors.localhost.net.ar/pub/mirrors/gentoo "
LANG="C"
LINGUAS="es ES en EN es_ES en_EN"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/layman/xeffects"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext X a52 aac aalib acpi additions alsa amd64 amrnb amrwb apm ares arts async atm audacious avi bash-completion bidi bzip2 cairo cdparanoia cdr clucene crypt cxx dbus dga divx4linux dlloader dpms dts dv dvd dvdnav dvdr dvdread enca encode evo exif fame fbcon ffmpeg firefox flac ftp gdbm gif glade glibc-omitfp glitz glsa glut gnome gpgme gpm gstreamer gtk gtk2 gtkhtml hal hda-intel howl iconv ipv6 joystick jpeg kde lame ldap libcaca libnotify live lm-sensors lm_sensors logrotate lzo mad madwifi midi mjpeg mmx mmxext mng mov mp2 mp3 mp4 mpeg mplayer musepack mysql ncurses netcat nls nptl nptonly nsplugin nvidia ogg openal opengl pda pdf perl pmu png pnm posix profile pulseaudio pvr python qemu quicktime rar readline regex rtc ruby samba sdl slang speex spell srt sse sse2 ssl ssse3 streamriper subtitles subversion svg symlink teamarena teletext tga theora threads threadsonly tiff truetype unicode usb v4l v4l2 vcd vid vorbis vorbis-psy wma x xcb xft xine xorg xv xvid zip" ALSA_CARDS="riptide hdsp hdspm" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard synaptics mouse joystick" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="es ES en EN es_ES en_EN" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS |
|
| Back to top |
|
 |
daddio
Tux's lil' helper
Joined: 11 Oct 2003
Posts: 145
Location: Orem, UT
|
| Posted: Tue Feb 19, 2008 3:49 pm Post subject: |
|
|
did you get the madwifi firmware?
you need either the official firmware, or the reverse engineered openbsd firmware... can't remember if there is an ebuild... |
|
| Back to top |
|
|
josedb
Apprentice
Joined: 03 Nov 2006
Posts: 222
|
| Posted: Tue Feb 19, 2008 7:57 pm Post subject: |
|
|
what do you mean?
emerge madwifi-ng? |
|
| Back to top |
|
|
mimosinnet
l33t
Joined: 10 Aug 2006
Posts: 717
Location: Barcelona, Spain
|
| Posted: Fri Mar 21, 2008 10:29 am Post subject: |
|
|
josedb,
Have you been able to solve your issue? I am using madwifi drivers and I am happy to give your my configuration so you can compare.
On the other hand, I have seen in your dmesg the following messages:
| Code: | Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods |
Do you have any idea of their meaning or what needs to be done?
Cheers!
Have you been able to solve your issue? I am using:
| Code: | # uname -a
Linux joanet 2.6.24-gentoo-r3 #1 SMP Thu Mar 20 21:02:17 CET 2008 i686 Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz GenuineIntel GNU/Linux |
On the other hand, I have seen in your dmesg the following messages:
| Code: | Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods |
Do you have any idea of their meaning or what needs to be done?
Cheers!
UPDATE: Gentoo bugzilla says it is a harmless warning. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
