Gentoo Forums :: View topic - Problems with ipw3945 and wpa

Problems with ipw3945 and wpa_supplicant

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

Networking & Security

View previous topic :: View next topic

Author

Message

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 03, 2008 6:29 am Post subject: Problems with ipw3945 and wpa_supplicant

Hi!

I want to work with wpa_supplicant, networkmanager and knetworkmanager, so a installed them, but knetworkmanager say me that "There is not active device", then I try with wpa_gui, but in device field there is empty so I can't select any device.

here you have my config files:

/etc/conf.d/net output:

Code:

neobalam neoriddle # cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).

modules_eth0=( "dhcpcd" )
config_eth0=( "dhcp" )

modules_eth2=( "wpa_supplicant" )
wpa_supplicant_eth2="-Dwext"
neobalam neoriddle #

then /etc/wpa_supplicant/wpa_supplicant.conf output:

Code:

neoriddle # cat /etc/wpa_supplicant/wpa_supplicant.conf
update_config=1
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
fast_reauth=1
dot11RSNAConfigPMKLifetime=43200
dot11RSNAConfigPMKReauthThreshold=70
dot11RSNAConfigSATimeout=60

network={
ssid="BalamNet"
key_mgmt=NONE
wep_key0=19C0B6DB32C6C28F344A62BE52
wep_tx_keyidx=0
priority=5
auth_alg=OPEN
}

neobalam neoriddle #

then a lspci output:

Code:

neobalam neoriddle # lspci
...
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
neobalam neoriddle #

I tried with wpa_supplicant command:

Code:

neobalam neoriddle # wpa_supplicant -Dwext -ieth2 -c /etc/wpa_supplicant/wpa_supplicant.conf
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 5 value 0x1 - ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Resource temporarily unavailable
Failed to initiate AP scan.
^CCTRL-EVENT-TERMINATING - signal 2 received
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Resource temporarily unavailable
neobalam neoriddle #

What can I do to solve it?

Thank you

mikegpitt
Advocate

Joined: 22 May 2004
Posts: 3224

Posted: Fri Mar 07, 2008 6:20 am Post subject:

Is your interface up? Try running:

Code:

ifconfig up eth2

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 3:29 am Post subject:

of course is up:

Code:

neobalam linux # /etc/init.d/net.eth2 restart --verbose
* Stopping eth2
* Loading networking modules for eth2
* modules: apipa arping ccwgroup clip tuntap macchanger macnet rename ifplugd iwconfig wpa_supplicant essidnet iptunnel ifconfig iproute2 pppd system dhclient dhcpcd ip6to4
* Bringing down eth2
* Shutting down eth2 ... [ ok ]
* Stopping wpa_cli on eth2 ... [ ok ]
* Stopping wpa_supplicant on eth2 ... [ ok ]
* Starting eth2
* Loading networking modules for eth2
* modules: apipa arping ccwgroup clip tuntap macchanger macnet rename ifplugd wpa_supplicant essidnet iptunnel iproute2 pppd system dhcpcd ip6to4
* ifplugd provides plug
* wpa_supplicant provides wireless
* iproute2 provides interface
* pppd provides ppp
* dhcpcd provides dhcp
* Configuring eth2 for MAC address 00:13:02:E0:49:47 ... [ ok ]
* ifplugd does not work on wireless interfaces
* Starting wpa_supplicant on eth2 ...
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily unavailable [ ok ]th param 5 value 0x1 -
* Starting wpa_cli on eth2 ... [ ok ]
* Waiting for association [ ok ]
* Backgrounding ...
neobalam linux #

d2_racing
Bodhisattva

Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

Posted: Mon Mar 10, 2008 3:44 am Post subject:

What kernel version are you using ?

d2_racing
Bodhisattva

Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

Posted: Mon Mar 10, 2008 3:46 am Post subject:

Without touching anything, what do you see when you lunch this command :

Code:

#iwlist scan

Do you see your AP ?

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 3:49 am Post subject:

here you have a iwlist output:

Code:

neobalam linux # iwlist scan
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

tunl0 Interface doesn't support scanning.

sit0 Interface doesn't support scanning.

ip6tnl0 Interface doesn't support scanning.

eth2 Scan completed :
Cell 01 - Address: 00:18:4D:99:67:EE
ESSID:"BalamNet"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 9 Mb/s; 11 Mb/s
6 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=92/100 Signal level=-35 dBm Noise level=-39 dBm
Extra: Last beacon: 596ms ago

neobalam linux #

d2_racing
Bodhisattva

Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

Posted: Mon Mar 10, 2008 3:50 am Post subject:

Code:

network={
ssid="BalamNet"
key_mgmt=NONE
wep_key0=19C0B6DB32C6C28F344A62BE52
wep_tx_keyidx=0
priority=5
auth_alg=OPEN
}

Are you sure that theses setting are good, because I see a wep_key...so I think that you need something like this :

Code:

network={
ssid="BalamNet"
psk=19C0B6DB32C6C28F344A62BE52
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
priority=5
}

I never used WPA, but I think that your /etc/wpa_supplicant/wpa_supplicant.conf is not right.

d2_racing
Bodhisattva

Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

Posted: Mon Mar 10, 2008 3:51 am Post subject:

So your driver is working, good, so there only a config that is not correctly set.

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 3:59 am Post subject:

here you have mu wpa_supplicant.conf:

Code:

update_config=1
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
fast_reauth=1
dot11RSNAConfigPMKLifetime=43200
dot11RSNAConfigPMKReauthThreshold=70
dot11RSNAConfigSATimeout=60
network={
ssid="BalamNet"
psk=19C0B6DB32C6C28F344A62BE52
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
priority=5
}

and run it:

Code:

neobalam linux # /etc/init.d/net.eth2 restart --verbose
* Caching service dependencies ... [ ok ]
* Stopping eth2
* Loading networking modules for eth2
* modules: apipa arping ccwgroup clip tuntap macchanger macnet rename ifplugd iwconfig wpa_supplicant essidnet iptunnel ifconfig iproute2 pppd system dhclient dhcpcd ip6to4
* Bringing down eth2
* Shutting down eth2 ... [ ok ]
* Stopping wpa_cli on eth2 ... [ ok ]
* Stopping wpa_supplicant on eth2 ... [ ok ]
* Starting eth2
* Loading networking modules for eth2
* modules: apipa arping ccwgroup clip tuntap macchanger macnet rename ifplugd wpa_supplicant essidnet iptunnel iproute2 pppd system dhcpcd ip6to4
* ifplugd provides plug
* wpa_supplicant provides wireless
* iproute2 provides interface
* pppd provides ppp
* dhcpcd provides dhcp
* Configuring eth2 for MAC address 00:13:02:E0:49:47 ... [ ok ]
* ifplugd does not work on wireless interfaces
* Starting wpa_supplicant on eth2 ...
ioctl[SIOCSIWMODE]: Resource temporarily unavailable
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWENCODEEXT]: Resource temporarily unavailable
ioctl[SIOCSIWAUTH]: Resource temporarily unavailable
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Resource temporarily unavailable [ ok ]th param 5 value 0x1 -
* Starting wpa_cli on eth2 ... [ ok ]
* Waiting for association [ ok ]
* Backgrounding ...
neobalam linux #

jeanfrancis
Veteran
Veteran

Joined: 17 Dec 2005
Posts: 1482
Location: Québec, Canada

Posted: Mon Mar 10, 2008 2:46 pm Post subject:

Hi there !

First of all, some questions

Are you using the ipw3945* packages, or iwlwifi ?
What networking stack are you using ? ieee802.11 or mac802.11 ?

lsmod will answer those two questions

Then, if you are using ipw3945, try this :

Code:

# /etc/init.d/net.eth1 stop
# /etc/init.d/ipw3945d stop
# killall wpa_supplicant
# killall ipw3945d
# modprobe -r ipw3945
# modprobe ipw3945

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 3:28 pm Post subject:

Hi
Thank you very much for your answers.

I use ipw3945:

Code:

neobalam linux # emerge -vp ipw3945

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] net-wireless/ipw3945-1.2.2-r1 USE="-debug" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB
neobalam linux #

and i'm using ieee802.11:

Code:

neobalam linux # cat .config | grep -i "^config.*ieee"
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_RAWIO=y
neobalam linux #

Here you have an lsmod output:

Code:

neobalam linux # lsmod
Module Size Used by
rfcomm 33168 7
hidp 14208 2
l2cap 20096 10 rfcomm,hidp
hci_usb 13212 6
bluetooth 49892 16 rfcomm,hidp,l2cap,hci_usb
snd_hda_intel 280092 3
rng_core 4100 0
ipw3945 102688 0
neobalam linux #

and the commands output:

Code:

neobalam linux # moprobe wpa_supplicant
bash: moprobe: command not found
neobalam linux # modprobe wpa_supplicant
FATAL: Module wpa_supplicant not found.
neobalam linux # /etc/init.d/net.eth1 stop
bash: /etc/init.d/net.eth1: No such file or directory
neobalam linux # # /etc/init.d/ipw3945d stop
neobalam linux # # killall wpa_supplicant
neobalam linux # # killall ipw3945d
neobalam linux # # modprobe -r ipw3945
neobalam linux # # modprobe ipw3945
neobalam linux #

Thank you

jeanfrancis
Veteran
Veteran

Joined: 17 Dec 2005
Posts: 1482
Location: Québec, Canada

Posted: Mon Mar 10, 2008 3:38 pm Post subject:

Oh, sorry, yours wasn't eth1 but eth2.

Also, the commands you did, done nothing, don't have the # in front of the lines, I only have put it to represent the command line invite of the root user

Try it again and post the results

Code:

/etc/init.d/net.eth2 stop
/etc/init.d/ipw3945d stop
killall wpa_supplicant
killall ipw3945d
modprobe -r ipw3945
modprobe ipw3945

Edit :

If I'm right, the network should start by itself using wpa_supplicant, you can verify if you get an IP address with ifconfig...
You can also use wpa_gui to connect to your network, if it don't seem to work...[/i]

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 3:55 pm Post subject:

jaja excume i only copy and paste because am hurry

Code:

neobalam linux # /etc/init.d/net.eth2 stop
* Caching service dependencies ... [ ok ]
* Stopping eth2
* Bringing down eth2
* Shutting down eth2 ... [ ok ]
* Stopping wpa_cli on eth2 ... [ ok ]
* Stopping wpa_supplicant on eth2 ... [ ok ]
neobalam linux # /etc/init.d/ipw3945d stop
* Stopping ipw3945d ... [ ok ]
neobalam linux # killall wpa_supplicant
wpa_supplicant: no process killed
neobalam linux # killall ipw3945d
ipw3945d: no process killed
neobalam linux # modprobe -r ipw3945
* WARNING: ipw3945d has not yet been started.
neobalam linux # modprobe ipw3945
* Starting ipw3945d ... [ ok ]
neobalam linux #

and an ifconfig output:

Code:

neobalam linux # ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:C5:42:B2:91
inet addr:10.0.0.6 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:fe42:b291/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:505389 errors:0 dropped:0 overruns:0 frame:0
TX packets:456754 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:445877886 (425.2 Mb) TX bytes:82428562 (78.6 Mb)
Interrupt:17

eth2 Link encap:Ethernet HWaddr 00:13:02:E0:49:47
inet6 addr: fe80::213:2ff:fee0:4947/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:7 errors:2 dropped:227 overruns:0 frame:0
TX packets:0 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:306046 (298.8 Kb) TX bytes:1332 (1.3 Kb)
Interrupt:17 Base address:0xe000 Memory:efdff000-efdfffff

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:42164 errors:0 dropped:0 overruns:0 frame:0
TX packets:42164 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24710089 (23.5 Mb) TX bytes:24710089 (23.5 Mb)

neobalam linux #

jeanfrancis
Veteran
Veteran

Joined: 17 Dec 2005
Posts: 1482
Location: Québec, Canada

Posted: Mon Mar 10, 2008 4:01 pm Post subject:

Could you then post the output of :

Code:

dmesg | tail

And then try wpa_gui to connect to your network ? You can use the SCAN button, double-click on your access point, it should detect the needed configuration (encryption type, WPA2, etc). Enter your key and try to connect !

IsraelBuitronD
Guru
Guru

Joined: 24 Jun 2005
Posts: 344
Location: México

Posted: Mon Mar 10, 2008 4:57 pm Post subject:

here you have a dmesg tail:

Code:

neobalam neoriddle # dmesg | tail -n 100
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
usbcore: registered new interface driver ipaq
usbcore: registered new interface driver berry_charge
usbcore: registered new interface driver usblcd
usbcore: registered new interface driver usbled
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
No soundcards found.
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Starting balanced_irq
input: AT Translated Set 2 keyboard as /class/input/input3
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Clocksource tsc unstable (delta = -201850193 ns)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 340k freed
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
intel_rng: FWH not detected
FAT: "posix" option is obsolete, not supported now
Adding 995988k swap on /dev/sda6. Priority:-1 extents:1 across:995988k
ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
udev: renamed network interface eth1 to eth2
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth2: no IPv6 routers present
eth0: no IPv6 routers present
neobalam neoriddle #

Display posts from previous:

	Gentoo Forums Forum Index Networking & Security	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy