| View previous topic :: View next topic |
| Author |
Message |
daktak
Tux's lil' helper
Joined: 18 Oct 2002
Posts: 142
Location: Melbourne, Victoria
|
 Posted: Sun May 04, 2008 11:53 am Post subject: |
 |
|
I've tried out openrc 2.2 on my mythbox, i got the following error when running mythbackend
| Code: | 2008-05-04 21:22:23.957 Using runtime prefix = /usr
2008-05-04 21:22:23.960 Unable to read configuration file mysql.txt
2008-05-04 21:22:23.961 Trying to create a basic mysql.txt file
2008-05-04 21:22:23.962 Could not create /dev/null/.mythtv
2008-05-04 21:22:23.963 Failed to init MythContext, exiting.
|
Does this kick off the service under a different user or environment? |
|
| Back to top |
|
 |
makism
Tux's lil' helper
Joined: 24 Oct 2007
Posts: 85
|
| Posted: Sun May 04, 2008 8:30 pm Post subject: |
|
|
thanks uberlord! everything worked fine =)
just some, usual issues like reiser4, some xsession-related etc... |
|
| Back to top |
|
|
imesg
Guru
Joined: 12 Jul 2002
Posts: 445
|
| Posted: Mon May 05, 2008 11:53 pm Post subject: net.* and modules |
|
|
When I stop net.wlan0 this appears:
* Bringing down interface wlan0
* Loaded modules: ip6to4 dhcpcd udhcpc dhclient system pppd iproute2 ifconfig ssidnet wpa_supplicant iwconfig ipppd ifplugd netplugd macnet macchanger ccwgroup tuntap br2684ctl arping apipa
Where does this stuff come from? I have this line in /etc/conf.d/net:
modules_wlan0="ifconfig iwconfig !dhclient !wpa_supplicant !apipa !arping !tuntap !ccwgroup !macchanger !macnet ssidnet !iproute2 !pppd system dhcpcd !ip6to4"
Seems to work alright though.
Thanks,
Gene |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
| Posted: Tue May 06, 2008 9:08 am Post subject: Re: net.* and modules |
|
|
| imesg wrote: | When I stop net.wlan0 this appears:
* Bringing down interface wlan0
* Loaded modules: ip6to4 dhcpcd udhcpc dhclient system pppd iproute2 ifconfig ssidnet wpa_supplicant iwconfig ipppd ifplugd netplugd macnet macchanger ccwgroup tuntap br2684ctl arping apipa
Where does this stuff come from? |
OpenRC ships with support for all of that. If you're seeing this then you have that software installed. Or at least, OpenRC thinks you have.
| Quote: | I have this line in /etc/conf.d/net:
modules_wlan0="ifconfig iwconfig !dhclient !wpa_supplicant !apipa !arping !tuntap !ccwgroup !macchanger !macnet ssidnet !iproute2 !pppd system dhcpcd !ip6to4"
|
modules_wlan0="ifconfig iwconfig"
Should be all you need. You could also get away with dropping ifconfig from that depending on your setup.
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool |
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 9:12 am Post subject: |
|
|
hello everybody.
ive got lots of errors now that i have upgraded to openrc/baselayout2.
can anyone tell me why why machine is erroring like this?
cat /var/log/rc.log
rc boot logging started at Wed May 7 08:59:42 2008
hwclock |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
hwclock | * Setting system clock using the hardware clock [Local Time] ...
[ ok ]
hwclock |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
hostname |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
hostname | * Setting hostname to localhost ...
modules |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
termencoding |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
termencoding | * Setting terminal encoding [UTF-8] ...
[ ok ]
[ ok ]
hostname |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
modules | * Autoloaded 0 module(s)
termencoding |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
modules |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
sysctl |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
sysctl | * Configuring kernel parameters ...
device-mapper |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
device-mapper |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
sysctl |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
fsck |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
fsck | * Checking local filesystems ...
fsck |/dev/sda5: clean, 39675/244320 files, 361623/487966 blocks
fsck |/boot: clean, 110/48192 files, 58347/192748 blocks
fsck |/dev/sda3: clean, 12/244320 files, 8396/487974 blocks
fsck |/dev/sda6: clean, 164388/2443200 files, 987545/4883752 blocks
fsck |/dev/sda7: clean, 306537/2443200 files, 1701827/4883752 blocks
fsck |/usr/portage: clean, 159155/2443200 files, 3521994/4883752 blocks
fsck |/usr/src: clean, 342597/2443200 files, 2234428/4883752 blocks
fsck |/home: clean, 33685/2443200 files, 2100970/4883752 blocks
fsck |Reiserfs super block in block 16 on 0x80b of format 3.6 with standard journal
fsck |Blocks (total/free): 48827536/22133959 by 4096 bytes
fsck |Filesystem is clean
fsck |Replaying journal..
fsck |Reiserfs journal '/dev/sda11' in blocks [18..8211]: 0 transactions replayed
fsck |Checking internal tree..finished
fsck |Reiserfs super block in block 16 on 0x80c of format 3.6 with standard journal
fsck |Blocks (total/free): 47580496/23994350 by 4096 bytes
fsck |Filesystem is clean
fsck |Replaying journal..
fsck |Reiserfs journal '/dev/sda12' in blocks [18..8211]: 0 transactions replayed
fsck |Checking internal tree..finished
fsck |/sbin/fsck.xfs: XFS file system.
fsck |/sbin/fsck.xfs: XFS file system.
fsck |Reiserfs super block in block 16 on 0x1604 of format 3.6 with standard journal
fsck |Blocks (total/free): 24414768/17284765 by 4096 bytes
fsck |Filesystem is clean
fsck |Replaying journal..
fsck |Reiserfs journal '/dev/hdc4' in blocks [18..8211]: 0 transactions replayed
fsck |Checking internal tree..finished
fsck |/sbin/fsck.xfs: XFS file system.
fsck |/sbin/fsck.xfs: XFS file system.
[ ok ]
fsck |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
root |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
root | * Remounting root filesystem read/write ...
[ ok ]
root |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
mtab |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
mtab | * Updating /etc/mtab ...
[ ok ]
mtab |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
localmount |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
localmount | * Mounting local filesystems ...
[ ok ]
localmount |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not fond
udev-postmount |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
swap |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
urandom |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
procfs |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
urandom | * Initializing random number generator ...
bootmisc |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
swap | * Activating swap devices ...
procfs | * Mounting USB device filesystem [usbfs] ...
consolefont |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
keymaps |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
keymaps | * Loading key mappings [us] ...
udev-postmount |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
consolefont | * Setting console font [default8x16] ...
[ ok ]
swap |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
procfs |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
bootmisc | * Creating user login records ...
keymaps | * Setting keyboard mode [UTF-8] ...
urandom |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
consolefont |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
bootmisc | * Cleaning /var/run ...
[ ok ]
keymaps |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
bootmisc | * Wiping /tmp directory ...
[ ok ]
bootmisc |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
net.lo |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
net.lo | * Bringing up interface lo
net.lo |/etc/init.d/net.lo: line 347: command: iwconfig_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: iwconfig_post_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: wpa_supplicant_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: wpa_supplicant_post_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: ifconfig_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: ifconfig_post_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: iproute2_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: pppd_post_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: dhclient_pre_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: dhclient_post_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: dhcpcd_pre_start: not found
net.lo |/etc/init.d/net.lo: line 347: command: dhcpcd_post_start: not found
net.lo |/etc/init.d/net.lo: line 465: command: preup: not found
net.lo |/etc/init.d/net.lo: line 476: command: apipa_pre_start: not found
net.lo |/etc/init.d/net.lo: line 476: command: arping_pre_start: not found
net.lo |/etc/init.d/net.lo: line 476: command: dhcpcd_pre_start: not found
net.lo |/etc/init.d/net.lo: line 476: command: ip6to4_pre_start: not found
net.lo | * 127.0.0.1/8 ...
[ ok ]
net.lo | * Adding routes
net.lo | * 127.0.0.0/8 via 127.0.0.1 ...
[ ok ]
net.lo |/etc/init.d/net.lo: line 603: command: apipa_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: arping_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: tuntap_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: bridge_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: ccwgroup_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: macchanger_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: macnet_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: wpa_supplicant_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: ssidnet_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: pppd_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: system_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: dhcpcd_post_start: not found
net.lo |/etc/init.d/net.lo: line 603: command: ip6to4_post_start: not found
net.lo |/etc/init.d/net.lo: line 608: command: postup: not found
net.lo |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
net.eth0 |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
net.eth0 | * Bringing up interface eth0
net.eth0 |/etc/init.d/net.eth0: line 347: command: iwconfig_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: iwconfig_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: wpa_supplicant_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: wpa_supplicant_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: ifconfig_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: ifconfig_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: iproute2_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: pppd_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: dhclient_pre_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: dhclient_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: dhcpcd_pre_start: not found
net.eth0 |/etc/init.d/net.eth0: line 347: command: dhcpcd_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 465: command: preup: not found
net.eth0 |/etc/init.d/net.eth0: line 476: command: apipa_pre_start: not found
net.eth0 |/etc/init.d/net.eth0: line 476: command: arping_pre_start: not found
net.eth0 |/etc/init.d/net.eth0: line 476: command: dhcpcd_pre_start: not found
net.eth0 |/etc/init.d/net.eth0: line 476: command: ip6to4_pre_start: not found
net.eth0 | * dhcp ...
net.eth0 | * Running dhcpcd ...
[ ok ]
net.eth0 | * received address 10.0.0.1/8
[ ok ]
net.eth0 |/etc/init.d/net.eth0: line 603: command: apipa_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: arping_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: tuntap_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: bridge_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: ccwgroup_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: macchanger_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: macnet_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: wpa_supplicant_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: ssidnet_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: pppd_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: system_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: dhcpcd_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 603: command: ip6to4_post_start: not found
net.eth0 |/etc/init.d/net.eth0: line 608: command: postup: not found
net.eth0 |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
rc boot logging stopped at Tue May 6 21:00:23 2008
rc default logging started at Tue May 6 21:00:23 2008
dbus |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
dbus | * Starting D-BUS system messagebus ...
alsasound |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
alsasound | * Loading ALSA modules ...
alsasound | * Loading: snd-card-0 ...
sysklogd |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
sysklogd | * sysklogd -> start: syslogd ...
[ ok ]
alsasound | * Loading: snd-card-1 ...
[ ok ]
alsasound | * Loading: snd-mixer-oss ...
[ ok ]
alsasound | * Loading: snd-pcm-oss ...
[ ok ]
alsasound | * Loading: snd-seq-oss ...
[ ok ]
alsasound | * Loading: snd-seq-midi ...
[ ok ]
[ ok ]
[ ok ]
alsasound | * Restoring Mixer Levels ...
alsasound |alsactl: set_control:1300: incompatible field type for control #6
alsasound |alsactl: set_control:1300: incompatible field type for control #35
[ ok ]
alsasound |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
dbus |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
system-tools-backends |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
system-tools-backends | * Starting system-tools-backend ...
[ ok ]
system-tools-backends |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
sysklogd | * sysklogd -> start: klogd ...
[ ok ]
sysklogd |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
acpid |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
acpid | * Starting acpid ...
ntp-client |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
ntp-client | * Setting clock via the NTP client 'ntpdate' ...
[ ok ]
acpid |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
hald |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
hald | * Starting Hardware Abstraction Layer daemon ...
[ ok ]
ntp-client |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
[ ok ]
hald |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
local |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
local | * Starting local ...
[ ok ]
local |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
rc default logging stopped at Tue May 6 21:00:27 2008 |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 11:46 am Post subject: |
|
|
is this what u mean?
/bin/sh --help
GNU bash, version 3.00.16(1)-release-(x86_64-pc-linux-gnu)
Usage: /bin/sh [GNU long option] [option] ...
/bin/sh [GNU long option] [option] script-file ...
GNU long options:
--debug
--debugger
--dump-po-strings
--dump-strings
--help
--init-file
--login
--noediting
--noprofile
--norc
--posix
--protected
--rcfile
--restricted
--verbose
--version
--wordexp
Shell options:
-irsD or -c command or -O shopt_option (invocation only)
-abefhkmnptuvxBCHP or -o option
Type `/bin/sh -c "help set"' for more information about shell options.
Type `/bin/sh -c help' for more information about shell builtin commands.
Use the `bashbug' command to report bugs. |
|
| Back to top |
|
|
Theimon
Tux's lil' helper
Joined: 16 Mar 2007
Posts: 99
Location: Netherlands
|
| Posted: Tue May 06, 2008 12:01 pm Post subject: |
|
|
So far, Openrc has worked fine for me. Bootup seems faster, but since it's new I'd like to "see" what it's doing. Perhaps I overlooked something or searched with the wrong keywords, but how do I get Openrc to log it's output? And can I get Openrc to log by default?
All messages scroll by so fast, I can't tell if everything boots up according to plan.
_________________
It doesn't matter what's right, it's only wrong if you get caught. |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
Theimon
Tux's lil' helper
Joined: 16 Mar 2007
Posts: 99
Location: Netherlands
|
| Posted: Tue May 06, 2008 12:09 pm Post subject: |
|
|
| UberLord wrote: | | Enable rc_logger in /etc/rc.conf and then look in /var/log/rc.log |
Darn, I can't believe I didn't see that  Thank you for your (extremely) quick response 
_________________
It doesn't matter what's right, it's only wrong if you get caught. |
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 12:16 pm Post subject: |
|
|
satellite r1h # (foo(){ :; }; command -v foo;)
foo
satellite r1h #
it appears to echo foo to stdout
satellite r1h # rc-service local stop; rc-service local -- --debug start
local | * Caching service dependencies ...
/etc/init.d/net.eth0: line 31: command: depend_eth0: not found
/etc/init.d/net.lo: line 31: command: depend_lo: not found [ ok ]
local |/lib64/rc/sh/runscript.sh: line 165: command: stop_pre: not found
local | * Stopping local ... [ ok ]
local |/lib64/rc/sh/runscript.sh: line 169: command: stop_post: not found
local |+ _conf_d=/etc/init.d/../conf.d
local |+ _c=local
local |+ '[' -n local -a local '!=' local ']'
local |+ unset _c
local |+ '[' -e /etc/init.d/../conf.d/local.default ']'
local |+ '[' -e /etc/init.d/../conf.d/local ']'
local |+ . /etc/init.d/../conf.d/local
local |+ unset _conf_d
local |+ '[' -e /etc/rc.conf ']'
local |+ . /etc/rc.conf
local |++ rc_parallel=YES
local |++ rc_interactive=NO
local |++ rc_depend_strict=YES
local |++ rc_hotplug=YES
local |++ rc_coldplug=YES
local |++ rc_plug_services=
local |++ rc_logger=YES
local |++ unicode=YES
local |++ net_fs_list='cifs smbfs'
local |++ rc_tty_number=12
local |++ rc_devices=udev
local |++ rc_device_tarball=NO
local |++ dmesg_level=1
local |++ rc_verbose=NO
local |+ '[' -n '' ']'
local |+ . /etc/init.d/local
local |++ description='Executes user commands in /etc/conf.d/local'
local |+ unset _d
local |+ unset _f
local |+ '[' -n start ']'
local |+ for _cmd in describe start stop '${extra_commands:-${opts}}' '${extra_started_commands}'
local |+ '[' describe = start ']'
local |+ for _cmd in describe start stop '${extra_commands:-${opts}}' '${extra_started_commands}'
local |+ '[' start = start ']'
local |++ command -v start
local |+ '[' start = start ']'
local |+ yesno
local |+ '[' -z '' ']'
local |+ return 1
local |+ unset _cmd
local |++ command -v start_pre
local |/lib64/rc/sh/runscript.sh: line 165: command: start_pre: not found
local |+ '[' '' = start_pre ']'
local |+ start
local |+ ebegin 'Starting local'
local | * Starting local ...
local |+ type local_start
local |+ local_start
local |+ return 0
local |+ '[' -e /etc/conf.d/local.start ']'
local |+ . /etc/conf.d/local.start
local |++ sensors -s
local |++ logitech_applet -s 800
local |++ chmod 644 /dev/input/event0 /dev/input/event1 /dev/input/event2 /dev/input/event3
local |++ echo 1500
local |++ echo 1
local |++ echo nameserver 202.27.156.72
local |++ echo nameserver 202.27.158.40
local |+ eend 0 'Failed to start local' [ ok ]
local |++ command -v start_post
local |/lib64/rc/sh/runscript.sh: line 169: command: start_post: not found
local |+ '[' '' = start_post ']'
local |+ shift
local |+ continue 2
local |+ '[' -n '' ']'
satellite r1h # |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 12:22 pm Post subject: |
|
|
satellite r1h # command -v thisshoulderror
satellite r1h #
came back with nothing.
thank u for helping btw. |
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 12:23 pm Post subject: |
|
|
err , i may have don that wrong first time
satellite r1h # command -v thisshoulderror
satellite r1h # type command
command is a shell builtin |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
jimhend~1
Tux's lil' helper
Joined: 20 Nov 2003
Posts: 89
|
| Posted: Tue May 06, 2008 12:58 pm Post subject: |
|
|
ok , i gave it ago.
first time ive ever submitted a bug.
let me know if my bug report sucks or is missing something.
cheers |
|
| Back to top |
|
|
imesg
Guru
Joined: 12 Jul 2002
Posts: 445
|
| Posted: Tue May 06, 2008 1:06 pm Post subject: connect by MAC address |
|
|
Not sure if the applies to openrc but here goes:
I uses several linksys routers with dd-wrt and wds. They all have the same ssid. However the main router is the only one that is full speed whereas the others are half speed because of wds. Is there a way to connect to a preferred MAC and fall back in the preffered one is not in range? Right now it looks like the behavior is to connect with the first in numerical order.
Sorry is this is off topic.
Thanks,
Gene |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
|
| Back to top |
|
|
aTan
Tux's lil' helper
Joined: 06 Jan 2007
Posts: 134
Location: Czech Republic (Ukraine)
|
| Posted: Tue May 06, 2008 6:22 pm Post subject: |
|
|
Hi. I'm trying to update openrc-9999 and since maybe hole last week it fails with this error:
===> init.d (install)
make[1]: Entering directory `/var/tmp/portage/portage/sys-apps/openrc-9999/work/openrc-9999/init.d'
install -m 0755 net.lo /var/tmp/portage/portage/sys-apps/openrc-9999/image///etc/init.d/net.lo
install: cannot create regular file `/var/tmp/portage/portage/sys-apps/openrc-9999/image///etc/init.d/net.lo': No such file or directory
install -d /var/tmp/portage/portage/sys-apps/openrc-9999/image///etc/init.d
make[1]: *** [_installafter] Error 1
make[1]: *** Waiting for unfinished jobs....
install -m 0755 bootmisc fsck halt.sh hostname local localmount netmount root swap sysctl urandom hwclock consolefont keymaps modules mtab numlock procfs termencoding /var/tmp/portage/portage/sys-apps/openrc-9999/image///etc/init.d
make[1]: Leaving directory `/var/tmp/portage/portage/sys-apps/openrc-9999/work/openrc-9999/init.d'
make: *** [realinstall] Error 2 |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
| Posted: Tue May 06, 2008 8:00 pm Post subject: Re: connect by MAC address |
|
|
| imesg wrote: | | I uses several linksys routers with dd-wrt and wds. They all have the same ssid. However the main router is the only one that is full speed whereas the others are half speed because of wds. Is there a way to connect to a preferred MAC and fall back in the preffered one is not in range? Right now it looks like the behavior is to connect with the first in numerical order. |
The iwconfig script sorts by signal quality, and chooses the highest quality. I suppose we could sort by speed, then by quality.
I don't know if you can do similar with wpa_supplicant. Which do you use?
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool |
|
| Back to top |
|
|
|
Other Things Gentoo
