Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Returning to Gentoo
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Other Things Gentoo
View previous topic :: View next topic  
Author Message
FastTurtle
Guru
Guru


Joined: 03 Sep 2002
Posts: 496
Location: Flakey Shake & Bake Caliornia, USA

PostPosted: Wed Apr 16, 2008 4:27 pm    Post subject: Returning to Gentoo Reply with quote

Now using Lynx as the browser while performing the final installation of Gentoo64 on an Intel C2D. I'm also using Lynx so I have no idea how the word wrap will work on this post.

Two things I had to do to successfully boot was mask all kernel sources later then 2.6.19 as they refuse to boot. Another thing was the reduction to 2GB of memory because for some reason I'm unable to boot into a working base system with all 4GB installed. That issue I hope to have resolved as I've completed building the base system (now posting from the console using Lynx).
_________________
AsRock B550 Phantom Gaming 4
128GB 3200 Mhz memory
1TB NVME as the boot disk
4x 4TB Sata - 2x 2TB Sata SSD - 4x 450GB SaS - 3x 900GB SaS - 72GB SaS for Gentoo system disk
LSI 9300-16i in HBA mode for all spinning disks
Radeon 6800 (Non XT) for GPU
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54550
Location: 56N 3W

PostPosted: Wed Apr 16, 2008 8:14 pm    Post subject: Reply with quote

FastTurtle,

You probably need grub-static to boot a 64 bit install with 4G of memory installed.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
alienjon
Veteran
Veteran


Joined: 09 Feb 2005
Posts: 1711

PostPosted: Wed Apr 16, 2008 9:32 pm    Post subject: Reply with quote

Code:
Two things I had to do to successfully boot was mask all kernel sources later then 2.6.19 as they refuse to boot.


Do you have any error messages to pass on for this? I just did a reinstall (AMD athlon 64 4400+ x2 (duel core & 64 bit)) and had problems with the kernel booting - init problems that were a bit of a headache. Cutting down on unnessesary grub.conf options and some kernel teaking fixed it.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Other Things Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum