| View previous topic :: View next topic |
| Author |
Message |
xerkan
n00b
Joined: 01 Jul 2006
Posts: 40
|
 Posted: Tue Apr 29, 2008 11:47 am Post subject: [Solucionado] Configurando CPUFreq |
 |
|
Estoy intentando poner el marcha el ahorro de energia para la cpu con el cpufreq pero cuando inicia el demonio me suelta este mensaje de error:
| Code: |
servidor ~ # /etc/init.d/cpufrequtils start
* Caching service dependencies ... [ ok ]
* Enabling ondemand cpufreq governor on CPU0 ... [ !! ]unknown or unhandled CPU?
* Enabling ondemand cpufreq governor on CPU1 ... [ !! ]unknown or unhandled CPU?
|
El procesador es un Athlon 64 BE-2350 montado sobre una placa base Abit AN52, el kernel esta compilado con el CPU Frequency scaling y el Default CPUFreq governor esta puesto en ondemand, la version del kernel es la gentoo-2.6.24-r4 |
|
| Back to top |
|
 |
ekz
l33t
Joined: 21 Jun 2006
Posts: 994
Location: Temuco - Chile
|
| Posted: Tue Apr 29, 2008 11:59 am Post subject: |
|
|
El tipo de procesador en el kernel está marcado como un Amd/Athlon? Activaste la opción PowerNOW! en el kernel?
Checa que tengas cosas como estas en tu dmesg (o /var/log/dmesg)
| Code: | powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 |
Saludos
_________________
Mi tumblelog |
|
| Back to top |
|
|
xerkan
n00b
Joined: 01 Jul 2006
Posts: 40
|
| Posted: Tue Apr 29, 2008 1:50 pm Post subject: |
|
|
Si el powernow fue lo primero que intente mirar esta activo dentro del kernel (no como modulo) la opcion AMD Opteron/Athlon64 PowerNow!
este es el mensaje que da el kernel con respecto al powernow:
| Code: |
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
|
de todas maneras pego todo mi dmesg para que le hecheis un vistazo.
| Code: |
Linux version 2.6.24-gentoo-r4 (root@xerkan) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 SMP Wed Apr 23 21:08:52 CEST 2008
Command line: root=/dev/hda1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7A80, 0014 (r0 Nvidia)
ACPI: RSDT 7FEE3000, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0)
ACPI: FACP 7FEE3080, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0)
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
ACPI: DSDT 7FEE3100, 6D3E (r1 NVIDIA NVDAACPI 1000 MSFT 3000000)
ACPI: FACS 7FEE0000, 0040
ACPI: SSDT 7FEE9EC0, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 7FEEA100, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98)
ACPI: MCFG 7FEEA140, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0)
ACPI: APIC 7FEE9E40, 0072 (r1 Nvidia NVDAACPI 42302E31 NVDA 0)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524000) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 524000
On node 0 totalpages: 523903
DMA zone: 56 pages used for memmap
DMA zone: 1091 pages reserved
DMA zone: 2852 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512796 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33184 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515648
Kernel command line: root=/dev/hda1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2109.721 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 2059176k/2096000k available (2682k kernel code, 36216k reserved, 795k data, 216k init)
Calibrating delay using timer specific routine.. 4223.52 BogoMIPS (lpj=8447046)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12557877
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4219.47 BogoMIPS (lpj=8438952)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - f3ffffff
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
Time: hpet clocksource has been installed.
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:01: iomem range 0x0-0x0 could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x290-0x30f has been reserved
system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:0c: iomem range 0xf0000-0xfffff could not be reserved
system 00:0c: iomem range 0xfeff0000-0xfeff00ff has been reserved
system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved
PCI: Bridge: 0000:00:08.0
IO window: c000-cfff
MEM window: fde00000-fdefffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:0b.0
IO window: b000-bfff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: a000-afff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Bridge: 0000:00:0d.0
IO window: 9000-9fff
MEM window: fd900000-fd9fffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:0e.0
IO window: 8000-8fff
MEM window: fd800000-fd8fffff
PREFETCH window: fd700000-fd7fffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1209148501.408:1): initialized
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:04:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Linux agpgart interface v0.102
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP65: IDE controller (0x10de:0x0448 rev 0xa1) at PCI slot 0000:00:09.0
NFORCE-MCP65: not 100% native mode: will probe irqs later
NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xec00-0xec07, BIOS settings: hda:DMA, hdb:DMA
NFORCE-MCP65: IDE port disabled
Probing IDE interface ide0...
hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
hda: ST3160021A, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
hda: cache flushes supported
hda: hda1 hda2
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usbcore: registered new interface driver yealink
drivers/input/misc/yealink.c: Yealink phone driver:yld-20051230
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
registered taskstats version 1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
input: PC Speaker as /devices/platform/pcspkr/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
SCSI subsystem initialized
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
libata version 3.00 loaded.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:07.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ACPI: Thermal Zone [THRM] (38 C)
ACPI: Fan [FAN] (on)
ahci 0000:00:0a.0: version 3.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a100 irq 20
ata2: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a180 irq 20
ata3: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a200 irq 20
ata4: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a280 irq 20
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.20 addr 0xfddfc000 irq 16 Yukon-EC Ultra (0xb4) rev 3
sky2 eth0: addr 00:50:8d:9e:4a:1c
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
EXT3 FS on hda1, internal journal
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
fuse init (API version 7.9)
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
Adding 1992052k swap on /dev/hda2. Priority:-1 extents:1 across:1992052k
|
lo unico estraño que tuve que hacer al compilar es quitar la opcion Message Signaled Interrupts (MSI and MSI-X) ya que si no el kernel no me reconocia los dos discos duros sata que tiene mi sistema |
|
| Back to top |
|
|
Stolz
Moderator
Joined: 19 Oct 2003
Posts: 3028
Location: Hong Kong
|
| Posted: Tue Apr 29, 2008 5:27 pm Post subject: |
|
|
Yo siempre he configurado el escalado de frecuencias de los AMD64 sin necesidad de usar ningún programa externo como cpufrequtils. Si no existe ningún motivo en especial para usar cpufrequtils, puedes consultar lo que ya escribí en su día sobre Cool'n'Quiet. Tiene tiempo pero creo que sigue siendo vigente.
Saludozzzzzzzz |
|
| Back to top |
|
|
ekz
l33t
Joined: 21 Jun 2006
Posts: 994
Location: Temuco - Chile
|
| Posted: Tue Apr 29, 2008 7:12 pm Post subject: |
|
|
| xerkan wrote: |
| Code: |
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
|
|
Definitivamente ahí hay pasa algo, googleando por ese error me encuentro
http://www.linuxquestions.org/questions/showthread.php?p=2276624#post2276624
http://wejp.k.vu/projects/howto_cnq_athlon_64_x2/
Yo tampoco uso ninguna herramienta externa para controlar los "governors" de mi procesador, solo tengo ondemand por default en el kernel y listo, antes usaba esta linea en mi /etc/conf.d/local.start : | Code: | | echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor |
Saludos
***EDIT: Recuerdo haber seguido el howto de Stolz hace tiempo. 
_________________
Mi tumblelog |
|
| Back to top |
|
|
Stolz
Moderator
Joined: 19 Oct 2003
Posts: 3028
Location: Hong Kong
|
| Posted: Sat May 03, 2008 2:01 am Post subject: |
|
|
| ¿Tienes C&Q activado en la BIOS? |
|
| Back to top |
|
|
xerkan
n00b
Joined: 01 Jul 2006
Posts: 40
|
| Posted: Sat May 03, 2008 1:58 pm Post subject: |
|
|
| Si que lo tengo activado, es mas hace nada tenia puesto una mandriva 2008 y en ella si que se estaba activo por defecto el ahorro de energia no tuve que hacer nada tenia un proba en el escritorio para ver como estaba la frecuencia de la cpu, tenia esta distro ya que es la unica q me reconocia los dos discos duros serial ata hasta que descubri que con la opcion pci=nomsi en gentoo tambien veia correctamente los discos y me decidi a instalarla ya que me gusta mucho mas el sistema de paqueteria de gentoo (viva el portage) al de mandria y me siento mas comodo con gentoo, pero en esta el ahorro de energia veo q me va a costar mas activarlo cuando deberia ser algo mas automatico |
|
| Back to top |
|
|
xerkan
n00b
Joined: 01 Jul 2006
Posts: 40
|
| Posted: Wed May 07, 2008 5:10 pm Post subject: |
|
|
Bueno pues hoy e visto una actualizacion del kernel al 2.6.24-r7 y me a dado por actualizarlo por probar ya que estaba en vez de dentro del kernel e configurado el powernow como modulo, e recompilado todo y al arrancar el resultado sin haber tocado nada mas q eso a sido este:
| Code: |
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xe
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xf
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x11
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x16
|
no se muy bien por que antes no hiba pero bueno el caso es que parece q el powernow le a dado por funcionar |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
