Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
perché? perché? perché??? [strano problema rete]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page Previous  1, 2  
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
KiTaSuMbA
Guru
Guru


Joined: 28 Jun 2002
Posts: 430
Location: Naples Italy

PostPosted: Thu Jul 24, 2003 6:18 pm    Post subject: Reply with quote

la modalita promiscua probabilmente fu triggerata da tcpdump. In verità significa che la interfaccia accetta di tutto e non solo i pachetti che sono indirizzati a essa. Utile per sniffare reti (del resto tcpdump e' appunto uno sniffer).
_________________
Need to flame people LIVE on IRC? Join #gentoo-otw on freenode!
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 6:19 pm    Post subject: [OT] Reply with quote

Nel mio momento di sconforto, non ho potuto fare a meno di notare una cosa.. :oops:
Cerri, ho magari detto qcosa in qualche post in maniera sgarbata?
Se é successo, mi scuso con te.
Scusate tutti per l'OT, ma ho avuto questa sensazione.
Grazie mille
Angosciato, vi saluto.
Jaco
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 6:21 pm    Post subject: Reply with quote

Quindi non c'entra la modalità promiscua :cry:
Ed io che pensavo potesse c'entrare :roll:
Grazie mille
Jaco
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Thu Jul 24, 2003 6:29 pm    Post subject: Re: [OT] Reply with quote

JacoMozzi wrote:
Nel mio momento di sconforto, non ho potuto fare a meno di notare una cosa.. :oops:
Cerri, ho magari detto qcosa in qualche post in maniera sgarbata?
Se é successo, mi scuso con te.

8O ma stai scherzando???
Se hai avuto questa sensazione perche' non ho messo bocca e' solo perche' sono stato un po' distante dal forum e ho quindi evitato thread un po' lunghetti...
Nella fattispecie il tuo era ben seguito e pensavo che la cosa si stesse risolvendo... :)

/me si sente in colpa e legge tutto il post :)
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 6:34 pm    Post subject: Reply with quote

Mi sento sollevato :). È solo che sapendo che sei sysadmin mi é sembrato strano che tu non intervenissi :lol: :lol:
Grazie mille
Jaco
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Thu Jul 24, 2003 6:38 pm    Post subject: Reply with quote

Piu' che altro ho *fortunatamente* poco a che fare con modem usb... :)

Ho notato una cosa. Che kernel usi nell'altro pc? E sopratutto, usi devfs?

Pc che funziona.
Quote:
Jul 24 15:34:25 amd pppd[2749]: Connect: ppp0 <--> /dev/pts/2

Pc che NON funziona.
Quote:
Jul 23 14:58:28 [pppd] Connect: ppp0 <--> /dev/ttyp0


Il fatto che tu riesca cmq a fare un telnet sulla porta 80 significa che la connessione viene stabilita con successo, tuttavia non significa che la navigazione vada.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 6:44 pm    Post subject: Reply with quote

Dunque, sul pc con la gentoo (con problema) uso un kernel 2.4.21 ac3, mentre sull'altro ho una MDK 9.0 con kernel 2.4.19. Ho guardato in fstab ed ho notato che uso devfs:
Code:

none /dev/pts devpts mode=0620 0 0

mentre nella gentoo non c'é devfs.
Grazie mille Jaco
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 7:33 pm    Post subject: Reply with quote

Aggiornamento:
Posto anche l'output di startmodem sul pc funzionante:
Code:

pentium problema_ppp # cat output_startmodem_amd
[root@amd giakomino]# startmodem &
[1] 2077
[root@amd giakomino]#
setting up USB support (1/5)..

ehci-hcd seems to be present trying to remove it...
ehci-hcd removed successfully

loading OHCI support
/lib/modules/2.4.19-16mdk/kernel/drivers/usb/usb-ohci.o.gz: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/usb/usb-ohci.o.gz failed
modprobe: insmod usb-ohci failed
couldn't load usb-ohci module

loading firmware (2/5)..

/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/000: No such file or directory
/proc/bus/usb/002/003: No such file or directory
/proc/bus/usb/002/003: No such file or directory
/proc/bus/usb/002/003: No such file or directory
GlobeSpan USB ADSL WAN Modem compatible modem found (in 2006ms)
ECI load 1: success
firmware loaded successfully

setting up modem (3/5)..

ECI load 2: success
synchronization successful

connecting modem (4/5)..

using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Looking for secret in /etc/ppp/pap-secrets for client
XXXXXX@adslplus.ch server (null)
Got client XXXXXX@adslplus.ch
Got server *
Got secret *
Got auth_addr *
Got client *
Looking for secret in /etc/ppp/chap-secrets for client
XXXXXX@adslplus.ch server (null)
Got client XXXXXX@adslplus.ch
Got server *
Got secret *
Got auth_addr *
Got client *
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb3f4ae24>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb3f4ae24>]
rcvd [LCP ConfReq id=0xcf <auth chap MD5> <magic 0x252c1c2f>]
sent [LCP ConfAck id=0xcf <auth chap MD5> <magic 0x252c1c2f>]
rcvd [CHAP Challenge id=0x54 <c1241060928598917a2d451766e3bd95>, name =
"ipc-bel630-r-lc-02"]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb3f4ae24>]
rcvd [LCP ConfReq id=0xd0 <auth chap MD5> <magic 0x252c32fb>]
sent [LCP ConfAck id=0xd0 <auth chap MD5> <magic 0x252c32fb>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xb3f4ae24>]
rcvd [CHAP Challenge id=0x55 <c1f30e908f7b88a07a2d45177bcab354>, name =
"ipc-bel630-r-lc-02"]
Looking for secret in /etc/ppp/chap-secrets for client
XXXXXX@adslplus.ch server ipc-bel630-r-lc-02
Got client XXXXXX@adslplus.ch
Got server *
Got secret *
Got auth_addr *
Got client *
sent [CHAP Response id=0x55 <d97f5c2d6fb1fb00cf0552d946b5d7c1>, name =
"XXXXXX@adslplus.ch"]
rcvd [CHAP Success id=0x55 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3
0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 62.167.36.220> <ms-dns1 194.230.1.136>
<ms-dns3 194.230.1.232>]
sent [IPCP ConfReq id=0x2 <addr 62.167.36.220> <ms-dns1 194.230.1.136>
<ms-dns3 194.230.1.232>]
rcvd [IPCP ConfAck id=0x2 <addr 62.167.36.220> <ms-dns1 194.230.1.136>
<ms-dns3 194.230.1.232>]
rcvd [IPCP ConfReq id=0x2a <addr 193.192.254.74>]
sent [IPCP ConfAck id=0x2a <addr 193.192.254.74>]
not replacing existing default route to eth0 [192.168.0.2]
local  IP address 62.167.36.220
remote IP address 193.192.254.74
primary   DNS address 194.230.1.136
secondary DNS address 194.230.1.232
connection successful

setting up route table (5/5)..

waiting for ppp0..
removing existing default route (eth0)..
adding default route..
default route added: ppp0


e l'output di startmodem sul pc NON funzionante:
Code:

pentium problema_ppp # cat output_startmodem_pentium
pentium problema_ppp #
setting up USB support (1/5)..

loading UHCI support
warning: usb-uhci module doesn't exist

loading firmware (2/5)..

firmware seems to be already loaded

setting up modem (3/5)..

ECI load 2: success
synchronization successful

connecting modem (4/5)..

using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyp1
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd9587107>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd9587107>]
rcvd [LCP ConfReq id=0x33 <auth chap MD5> <magic 0x25026935>]
sent [LCP ConfAck id=0x33 <auth chap MD5> <magic 0x25026935>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd9587107>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xd9587107>]
cbcp_lowerup
want: 2
rcvd [CHAP Challenge id=0x46 <e29f1f8b8c1cc3ab7a2d45175bc1e944>, name = "ipc-bel630-r-lc-02"]
sent [CHAP Response id=0x46 <97ad9069cb09c4684841b9e844bc36b2>, name = "XXXXXX@adslplus.ch"]
rcvd [CHAP Success id=0x46 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 62.167.70.181> <ms-dns1 194.230.1.168> <ms-dns3 194.230.1.232>]
sent [IPCP ConfReq id=0x2 <addr 62.167.70.181> <ms-dns1 194.230.1.168> <ms-dns3 194.230.1.232>]
rcvd [IPCP ConfAck id=0x2 <addr 62.167.70.181> <ms-dns1 194.230.1.168> <ms-dns3 194.230.1.232>]
rcvd [IPCP ConfReq id=0x4 <addr 193.192.254.77>]
sent [IPCP ConfAck id=0x4 <addr 193.192.254.77>]
local  IP address 62.167.70.181
remote IP address 193.192.254.77
primary   DNS address 194.230.1.168
secondary DNS address 194.230.1.232
connection successful

setting up route table (5/5)..

waiting for ppp0..
adding default route..
default route to ppp0 already exists


Come si può vedere c'é qcosa che non funziona, queste due righe
Code:
cbcp_lowerup
want: 2
sono molto strane.Ho già provveduto a cercare su internet ma senza risultati che potevano fare al mio caso
Grazie mille
Jaco
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Thu Jul 24, 2003 8:03 pm    Post subject: Reply with quote

Noterei anche:
Code:
loading UHCI support
 warning: usb-uhci module doesn't exist

_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Thu Jul 24, 2003 8:20 pm    Post subject: Reply with quote

Quello lo fa anche sul pc funzionante, é che al posto del modulo usb-uhci ho caricato il modulo uhci. Ho già visto che gli sviluppatori del driver dicono che uno sia meglio dell'altro, ma che cmq funzia con tutt'e due.
Continuo a non capire :cry: :cry: :cry: :cry: :cry:
Grazie mille a tutti.
Jaco
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Fri Jul 25, 2003 2:01 pm    Post subject: Reply with quote

SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ SÌ
:D :D :D :D :D :D :D :D :D :D :D :D
8) 8) 8) 8) 8) 8) 8) 8) :wink: :wink: :wink: :wink:
Funziona!!!!!!!!!!!!!!!!!!!!!
Ho ricompilato il kernel e non so perché per magia tutto funziona!!!!!!!
Grazie mille a tutti!!!!!!!!
Sono ottimista!!!!!!!!!
Jaco
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
adesso mi stampo tutti gli output possibili per non dimenticarmi della situazione, anche se in effetti é tutto uguale a prima :? e questo mi terrorizza 8O
Back to top
View user's profile Send private message
shev
Bodhisattva
Bodhisattva


Joined: 03 Feb 2003
Posts: 4084
Location: Italy

PostPosted: Fri Jul 25, 2003 2:48 pm    Post subject: Reply with quote

JacoMozzi wrote:
anche se in effetti é tutto uguale a prima :? e questo mi terrorizza 8O


Ma hai semplicemente ricompilato lo stesso kernel con le stesse opzioni? 8O
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Fri Jul 25, 2003 4:41 pm    Post subject: Reply with quote

ora devi fare un reply dove posti anche la foto del pc... :P
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Fri Jul 25, 2003 5:13 pm    Post subject: Reply with quote

Cerri ti devo ringranziare, perché finalmente si é scoperto cos'é che era, anche se il mistero rimane :roll:
Dunque sull'altro pc caricavo tranquillamente il modulo uhci, dava gli errori, ma funzionava (anche quelli del driver dicevano che non era una cosa così tanto importante se si caricasse uno o l'altro driver :twisted: )
Su questo pc invece si connette, ma con il modulo usb-uhci si naviga, con l'uhci no!
Eh sì, sono contento, veramente contento, anche se mi scazza sapere che su questo stesso pc utilizzavo il modulo uhci sulla mandrake, e potevo navigare.:roll: :roll: :roll: :roll:
Ho passato due giorni d'angoscia, ma finalmente adesso ne sono uscito.
Ringrazio tutti quelli che mi hanno aiutato, se mai c'incontreremo di persona vi offriro da bere 8)
Grazie mille
Adesso posso finalmente cominciare con le cose serie (firewall, apache, ftp :) )
Ciao
Jaco
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Fri Jul 25, 2003 6:33 pm    Post subject: Reply with quote

lieto fine 8)
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
KiTaSuMbA
Guru
Guru


Joined: 28 Jun 2002
Posts: 430
Location: Naples Italy

PostPosted: Fri Jul 25, 2003 6:48 pm    Post subject: Reply with quote

finalmente risolto il mistero!
e senza stregoni per lo più :P
Te l'avevo detto che USB è roba strana... e più passa il tempo più storie assurde ne sento. Ovviamente, le differenze tra i 2 driver sono sostanziali per lo specifico controller che non riesce a gestire bene le device sotto uhci.
_________________
Need to flame people LIVE on IRC? Join #gentoo-otw on freenode!
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Fri Jul 25, 2003 6:49 pm    Post subject: Reply with quote

:lol:
Mi sa che anche solo il pensiero di spazzare via l'installazione della gentoo per rimetterne un'altra ha intimidito il mio pc :twisted:
¨Jaco
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Fri Jul 25, 2003 7:52 pm    Post subject: Reply with quote

JacoMozzi wrote:
spazzare via l'installazione della gentoo per rimetterne un'altra

SACRILEGIO!!!!!!!!
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
shev
Bodhisattva
Bodhisattva


Joined: 03 Feb 2003
Posts: 4084
Location: Italy

PostPosted: Fri Jul 25, 2003 8:08 pm    Post subject: Reply with quote

cerri wrote:
JacoMozzi wrote:
spazzare via l'installazione della gentoo per rimetterne un'altra

SACRILEGIO!!!!!!!!


Quando riusciremo a scrollarci di dosso le pessime abitudini lasciateci in eredità da altrettanto pessimi software... eehh, un giorno il nostro sogno si avvererà :P
Back to top
View user's profile Send private message
JacoMozzi
l33t
l33t


Joined: 12 May 2003
Posts: 645
Location: Giubiasco world(EU(CH(TI)))

PostPosted: Fri Jul 25, 2003 10:34 pm    Post subject: Reply with quote

Scusate, ho peccato :twisted: :twisted: :twisted: :roll: :roll: :roll: :roll:
Certo che sapere che lo stesso modulo, sullo stesso hardware funzionava a dovere fa girare le palline :x
CIao a tutti
Jaco
Back to top
View user's profile Send private message
idonda
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2004
Posts: 134

PostPosted: Wed Apr 28, 2004 7:30 am    Post subject: Reply with quote

JacoMozzi wrote:

Adesso posso finalmente cominciare con le cose serie (firewall, apache, ftp :) )
Ciao
Jaco


scusa hai ricompilato il kernel, come?

uhci l'hai eliminato?.. il resto è sempre modulare?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum