View previous topic :: View next topic |
Author |
Message |
FormerSlacker Guru
Joined: 11 Mar 2003 Posts: 340 Location: Toronto, ON. Canada
|
Posted: Fri Sep 26, 2003 6:48 pm Post subject: |
|
|
himpierre wrote: | Hi
I've tried to install but:
Code: |
*** Removing previous /tmp/kde-cvs-bin
*** Unpacking archive kde-cvs-bin-20030926.tar.gz to /tmp/kde-cvs-bin
*** Emergeing: qt
Calculating dependencies \
!!! Problem in x11-libs/qt dependencies.
!!! 'in <string>' requires character as left operand
*** Emerge encountered an error, aborting...
|
Any ideas?
Thomas |
See my previous post on this matter, and larrys reply. Basicly the bins are compiled with r3, and seem to be incompatible with r6. |
|
Back to top |
|
|
FormerSlacker Guru
Joined: 11 Mar 2003 Posts: 340 Location: Toronto, ON. Canada
|
Posted: Fri Sep 26, 2003 7:19 pm Post subject: |
|
|
Just a note about the bin incompatibility.
I've done some testing on my box, and it seems that bins packaged with r3 wont work on r6, but bins packages on r6 will work with r3 and r6.
Strange stuff.
I've started a thread about this here. |
|
Back to top |
|
|
ebrostig Bodhisattva
Joined: 20 Jul 2002 Posts: 3152 Location: Orlando, Fl
|
Posted: Fri Sep 26, 2003 8:03 pm Post subject: |
|
|
I donwloaded and ran the kde-cvs shell script again.
2 things:
1. It fails on the md5sum. Had to turn off the option.
2. KDEBUILDARCH="kde-cvs-bin-20030916"
This is also incorrect, should not be 20030916 but 20030926
Changed the above and it installed fine.
Erik _________________ 'Yes, Firefox is indeed greater than women. Can women block pops up for you? No. Can Firefox show you naked women? Yes.' |
|
Back to top |
|
|
FormerSlacker Guru
Joined: 11 Mar 2003 Posts: 340 Location: Toronto, ON. Canada
|
Posted: Fri Sep 26, 2003 8:16 pm Post subject: |
|
|
ebrostig wrote: | I donwloaded and ran the kde-cvs shell script again.
2 things:
1. It fails on the md5sum. Had to turn off the option.
2. KDEBUILDARCH="kde-cvs-bin-20030916"
This is also incorrect, should not be 20030916 but 20030926
Changed the above and it installed fine.
Erik |
Yeah, larry forgot to change KDEBUILDARCH, and I messed up on the md5 section.
kbin-installer-5d.sh is a fixed version. |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Sat Sep 27, 2003 4:11 am Post subject: |
|
|
FormerSlacker wrote: | Just a note about the bin incompatibility.
I've done some testing on my box, and it seems that bins packaged with r3 wont work on r6, but bins packages on r6 will work with r3 and r6.
Strange stuff.
I've started a thread about this here. |
Weird indeed.
Also I updated the script let me know if there are anymore issues. |
|
Back to top |
|
|
norvillebarnes Tux's lil' helper
Joined: 28 Jun 2003 Posts: 116 Location: Sudbury, ON Canada
|
Posted: Sat Sep 27, 2003 5:02 pm Post subject: |
|
|
Hey iamlarryboy,
I've been meaning to thank you for the CUPS use flag. It works great, and there's now nothing for me to complain about. Keep up the great work.
Al |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Sat Sep 27, 2003 9:17 pm Post subject: |
|
|
norvillebarnes wrote: | Hey iamlarryboy,
I've been meaning to thank you for the CUPS use flag. It works great, and there's now nothing for me to complain about. Keep up the great work.
Al |
happy to be of service. |
|
Back to top |
|
|
daen1543 Tux's lil' helper
Joined: 15 Feb 2003 Posts: 85 Location: Berkeley, CA, USA
|
Posted: Sat Sep 27, 2003 9:29 pm Post subject: |
|
|
KDM is broken at the moment. Does anyone know how to setup xdm so I can log in? I've tried putting startkde & in ~/.xsession, but I get errors in .xsession-errors.
I really want to have a normal KDE, not just a konqueror in TWM
EDIT: I've solved the problem by creating a symlink ~/.xsession -> ~/.xinitrc and putting exec /etc/X11/Sessions/kde-5 in .xinitrc
EDIT 2: The FSView Konqueror plugin is great! Here's a screenshot. |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Sun Sep 28, 2003 12:14 am Post subject: |
|
|
daen1543 wrote: | KDM is broken at the moment. Does anyone know how to setup xdm so I can log in? I've tried putting startkde & in ~/.xsession, but I get errors in .xsession-errors.
I really want to have a normal KDE, not just a konqueror in TWM
EDIT: I've solved the problem by creating a symlink ~/.xsession -> ~/.xinitrc and putting exec /etc/X11/Sessions/kde-5 in .xinitrc
EDIT 2: The FSView Konqueror plugin is great! Here's a screenshot. |
Just using GDM works too. I think it would be cool if GDM and KDM could both use the xml themes. |
|
Back to top |
|
|
RedBeard0531 Guru
Joined: 21 Sep 2002 Posts: 415 Location: maryland
|
Posted: Sun Sep 28, 2003 3:39 am Post subject: |
|
|
Just wondren, what cflags do you use? _________________ OH MY GOD! Kenny just killed Kenny!
That Basterd! |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Sun Sep 28, 2003 7:22 am Post subject: |
|
|
RedBeard0531 wrote: | Just wondren, what cflags do you use? |
README |
|
Back to top |
|
|
TheWart Guru
Joined: 10 May 2002 Posts: 432 Location: Nashville,TN - USA
|
Posted: Sun Sep 28, 2003 8:23 pm Post subject: |
|
|
So what is the difference between the KDE-3.2 preview in portage and the KDE-CVS?
Is the CVS version simply updated more frequently?
I am thinking I would like to try KDE out. _________________ Face it, we are all noobs.
On the box it said it was designed for Win XP or better, so why won't it work with Linux? |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Sun Sep 28, 2003 9:21 pm Post subject: |
|
|
TheWart wrote: | So what is the difference between the KDE-3.2 preview in portage and the KDE-CVS?
Is the CVS version simply updated more frequently?
I am thinking I would like to try KDE out. |
The current build is nearly identical to the alpha2 available in portage. However, my builds follow CVS-HEAD. So I will have builds from inbetween alpha1/2/3 beta 1/2 etc. Provided of course that the CVS source actually compiles.
However, I am really looking forward to the release of 3.2. Because, then We get to follow HEAD on the exciting path to 4.0 woot! |
|
Back to top |
|
|
dob Apprentice
Joined: 04 Oct 2002 Posts: 199 Location: S.L.P.
|
Posted: Mon Sep 29, 2003 12:02 am Post subject: |
|
|
Could you upload a fixed version of the script?
I didn't manage to install the latest version even after changing the 16 to 26 and disabling the md5 check
Code: | *** Unpacking archive kde-cvs-bin-20030926.tar.gz to /tmp/kde-cvs-bin
*** Emergeing: qt
Calculating dependencies \
!!! Problem in x11-libs/qt dependencies.
!!! 'in <string>' requires character as left operand
*** Emerge encountered an error, aborting... |
(Besides that one problem, great job with these ebuilds ) |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Mon Sep 29, 2003 1:02 am Post subject: |
|
|
dob wrote: | Could you upload a fixed version of the script?
I didn't manage to install the latest version even after changing the 16 to 26 and disabling the md5 check
Code: | *** Unpacking archive kde-cvs-bin-20030926.tar.gz to /tmp/kde-cvs-bin
*** Emergeing: qt
Calculating dependencies \
!!! Problem in x11-libs/qt dependencies.
!!! 'in <string>' requires character as left operand
*** Emerge encountered an error, aborting... |
(Besides that one problem, great job with these ebuilds ) |
I think there was a problem with the updated script in addition to the datestamp. Try redownloading the script from my site. If you still have problems please let me know and we will try to work it out asap. |
|
Back to top |
|
|
dob Apprentice
Joined: 04 Oct 2002 Posts: 199 Location: S.L.P.
|
Posted: Mon Sep 29, 2003 1:22 am Post subject: |
|
|
still the same
Full log just in case
Code: | bruce-lee ~ # sh /tmp/kde-cvs-bin.sh
*** KDE-CVS binary installer v0.5d
*** This script will attempt to download and install
*** the KDE-CVS & QT-CVS ebuilds and binary packages.
*** If you do not understand the consequences of this
*** action, press CTRL+C to abort this script now.
*** Proceeding with installation in 10 seconds
..........
*** On with the show...
*** Checking system sanity...
*** Everthing looks okay.
*** Looking for the KDE-CVS ebuilds...
*** KDE-CVS ebuilds found!
*** Installation of the ebuilds isn't necessary.
*** kde-cvs-bin-20030926.tar.gz exists, skipping download.
*** kde-cvs-md5 exists, skipping download.
*** Checking md5 for: kde-cvs-bin-20030926.tar.gz
kde-cvs-bin-20030926.tar.gz: OK
*** kde-cvs-bin-20030926.tar.gz okay, moving on...
*** Checking md5 for: kde-cvs-20030916.tar.gz
*** Skipping kde-cvs-20030916.tar.gz, not needed...
*** Beginning KDE-CVS binary package installation...
*** /tmp/kde-cvs-bin exists, removing in 10 seconds. Press CTRL+C to abort
..........
*** Removing previous /tmp/kde-cvs-bin
*** Unpacking archive kde-cvs-bin-20030926.tar.gz to /tmp/kde-cvs-bin
*** Emergeing: qt
Calculating dependencies \
!!! Problem in x11-libs/qt dependencies.
!!! 'in <string>' requires character as left operand
*** Emerge encountered an error, aborting... |
|
|
Back to top |
|
|
fbleagh Tux's lil' helper
Joined: 13 Jun 2002 Posts: 98
|
Posted: Mon Sep 29, 2003 2:51 am Post subject: |
|
|
you have checked the version of portage u are using, ya ? |
|
Back to top |
|
|
bushwakko Guru
Joined: 25 Mar 2003 Posts: 495
|
Posted: Mon Sep 29, 2003 3:02 am Post subject: |
|
|
I've got the problem with KDM still, any idea how to fix it. I can't use GDM either, since it won't work with mye xfree 4.3.99.13 :/
Also, my Diablo 2 (via winex) started acting up after installing the newest cvs. I can't get the mouse to the top of the screen, it justs stops an inch from it. and if i point to the right side or the bottom the cursor gets "stuck" as in it doesn't seem to move, but If I move it around it suddenly appears somewhere else. _________________ Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
Back to top |
|
|
FormerSlacker Guru
Joined: 11 Mar 2003 Posts: 340 Location: Toronto, ON. Canada
|
Posted: Mon Sep 29, 2003 4:01 am Post subject: |
|
|
dob wrote: | Could you upload a fixed version of the script?
I didn't manage to install the latest version even after changing the 16 to 26 and disabling the md5 check
Code: | *** Unpacking archive kde-cvs-bin-20030926.tar.gz to /tmp/kde-cvs-bin
*** Emergeing: qt
Calculating dependencies \
!!! Problem in x11-libs/qt dependencies.
!!! 'in <string>' requires character as left operand
*** Emerge encountered an error, aborting... |
(Besides that one problem, great job with these ebuilds ) |
The problem is with portage, not the script. There was an issue with the 0.5c (sorry about that ) version of the installer, but there are no problems with 0.5d afaik. If there is, please let us know so we can fix it
However, there is a problem with portage and binary incompatiblilty. See my previous posts in this thread on the matter.
Basicly, you have the files, the md5 is fine, and the script is telling portage to emerge the binary, but emerge bails with that error so the script bails as well..
In short, downgrade to the r3 version of portage. The builds are packaged with portage r3 (2.0.49-r3) and wont work with r6. |
|
Back to top |
|
|
iamlarryboy Guru
Joined: 25 Jan 2003 Posts: 480 Location: Prince George, BC, Canada
|
Posted: Tue Sep 30, 2003 1:54 am Post subject: |
|
|
New builds. Get them at the usual [url=iamlarryboy.dyndns.org]place[/url].
Todays features:
A working md5 checking script (thanks to ForumSlacker)
Note: These builds build with slightly more than usual USE flags. This was due to me updating the build environment to all the latest packages and me forgetting to modify use.defaults |
|
Back to top |
|
|
bushwakko Guru
Joined: 25 Mar 2003 Posts: 495
|
Posted: Tue Sep 30, 2003 2:59 am Post subject: |
|
|
uhm, the .sh file seems to use the old source files though...
[EDIT]
my bad, the proxy wasn't updating, probably too similar... _________________ Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
Back to top |
|
|
himpierre l33t
Joined: 31 Aug 2002 Posts: 867 Location: Berlin
|
Posted: Tue Sep 30, 2003 9:11 am Post subject: |
|
|
Thanks, kscd is working again for me.
best regards
Thomas |
|
Back to top |
|
|
dob Apprentice
Joined: 04 Oct 2002 Posts: 199 Location: S.L.P.
|
Posted: Tue Sep 30, 2003 11:53 am Post subject: |
|
|
FormerSlacker wrote: | The problem is with portage, not the script. There was an issue with the 0.5c (sorry about that ) version of the installer, but there are no problems with 0.5d afaik. If there is, please let us know so we can fix it | It worked Thanks |
|
Back to top |
|
|
bushwakko Guru
Joined: 25 Mar 2003 Posts: 495
|
Posted: Tue Sep 30, 2003 1:42 pm Post subject: |
|
|
bushwakko wrote: | I've got the problem with KDM still, any idea how to fix it. I can't use GDM either, since it won't work with mye xfree 4.3.99.13 :/
Also, my Diablo 2 (via winex) started acting up after installing the newest cvs. I can't get the mouse to the top of the screen, it justs stops an inch from it. and if i point to the right side or the bottom the cursor gets "stuck" as in it doesn't seem to move, but If I move it around it suddenly appears somewhere else. |
I still has this problem though, need help! _________________ Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
Back to top |
|
|
daen1543 Tux's lil' helper
Joined: 15 Feb 2003 Posts: 85 Location: Berkeley, CA, USA
|
Posted: Tue Sep 30, 2003 10:13 pm Post subject: |
|
|
Regarding broken KDM: I disabled xdm completely (rc-update del xdm default), and put the following in ~/.xinitrc:
Code: | $ cat .xinitrc
#!/bin/bash
exec /etc/X11/Sessions/kde-5
|
Now, typing startx starts KDE.
Regarding the new builds: it's nice to see that Konqueror's text selecting speed has been fixed. If only someone could debug Qt's font resizing problem (Courier tiny from 2-12pts, large at 13+), KDM borkage, and aRTs (via ALSA) muting my front speakers on startup... |
|
Back to top |
|
|
|