| View previous topic :: View next topic |
| Author |
Message |
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
 Posted: Thu Jun 12, 2008 10:55 am Post subject: Hard disk hang... |
 |
|
Hi all... after installed new 80gb ide HD, my old one hangs many times, mainly when transfer big files between two hard disk...
this is the log from messages log file
| Code: | Jun 12 11:00:50 gentoobox ata3: timeout waiting for ADMA IDLE, stat=0x440
Jun 12 11:01:20 gentoobox ata3.00: qc timeout (cmd 0x2f)
Jun 12 11:01:20 gentoobox ata3: failed to read log page 10h (errno=-5)
Jun 12 11:01:20 gentoobox ata3.00: exception Emask 0x1 SAct 0x1 SErr 0x380000 action 0x2 frozen
Jun 12 11:01:20 gentoobox ata3.00: CPB resp_flags 0x11: , CMD error
Jun 12 11:01:20 gentoobox ata3: SError: { 10B8B Dispar BadCRC }
Jun 12 11:01:20 gentoobox ata3.00: cmd 60/40:00:c7:69:37/00:00:02:00:00/40 tag 0 ncq 32768 in
Jun 12 11:01:20 gentoobox res 41/00:00:c7:69:37/00:00:02:00:00/40 Emask 0x1 (device error)
Jun 12 11:01:20 gentoobox ata3.00: status: { DRDY ERR }
Jun 12 11:01:25 gentoobox ata3: port is slow to respond, please be patient (Status 0xc1)
Jun 12 11:01:30 gentoobox ata3: device not ready (errno=-16), forcing hardreset
Jun 12 11:01:30 gentoobox ata3: hard resetting link
Jun 12 11:01:35 gentoobox ata3: port is slow to respond, please be patient (Status 0x80)
Jun 12 11:01:40 gentoobox ata3: COMRESET failed (errno=-16)
Jun 12 11:01:40 gentoobox ata3: hard resetting link
Jun 12 11:01:45 gentoobox ata3: port is slow to respond, please be patient (Status 0x80)
Jun 12 11:01:50 gentoobox ata3: COMRESET failed (errno=-16)
Jun 12 11:01:50 gentoobox ata3: hard resetting link
Jun 12 11:01:56 gentoobox ata3: port is slow to respond, please be patient (Status 0x80)
|
someone that understand better can make me on the right way about this problem?
Sorry for my english... |
|
| Back to top |
|
 |
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Thu Jun 12, 2008 11:30 am Post subject: |
|
|
Hi, can you post this command for each of your HDD.
| Code: |
# hdparm -Tt /dev/[your hdd here]
|
Exemple :
| Code: |
# hdparm -Tt /dev/sda
|
|
|
| Back to top |
|
|
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
| Posted: Thu Jun 12, 2008 2:59 pm Post subject: |
|
|
my old one sata:
| Code: |
/dev/sda:
Timing cached reads: 1536 MB in 2.00 seconds = 768.50 MB/sec
Timing buffered disk reads: 188 MB in 3.00 seconds = 62.66 MB/sec
|
new ide:
| Code: |
/dev/hdc:
Timing cached reads: 1492 MB in 2.00 seconds = 746.17 MB/sec
Timing buffered disk reads: 222 MB in 3.01 seconds = 73.75 MB/sec
|
|
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Fri Jun 13, 2008 11:29 am Post subject: |
|
|
| Your new IDE is faster that your old SATA....it's weird. |
|
| Back to top |
|
|
energyman76b
Advocate
Joined: 26 Mar 2003
Posts: 2048
Location: Germany
|
| Posted: Fri Jun 13, 2008 11:33 am Post subject: |
|
|
hdparm doesn't tell you anything usefull in this case.
Looks like some hardware snafu. You should check your cables, probably you pushed the one to your old hd loose when you installed that new disk.
_________________
Study finds stunning lack of racial, gender, and economic diversity among middle-class white males
I identify as a dirty penismensch. |
|
| Back to top |
|
|
d2_racing
Bodhisattva
Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada
|
| Posted: Fri Jun 13, 2008 11:37 am Post subject: |
|
|
| In fact, or maybe it's a hardware problem. A SATA hdd need to be faster then a IDE for my concern. |
|
| Back to top |
|
|
energyman76b
Advocate
Joined: 26 Mar 2003
Posts: 2048
Location: Germany
|
| Posted: Fri Jun 13, 2008 11:43 am Post subject: |
|
|
| d2_racing wrote: | | In fact, or maybe it's a hardware problem. A SATA hdd need to be faster then a IDE for my concern. |
why? an old sata hd might be nothing but an ide hd with a bolted-on converter. There is no guarantee at all that a sata disk is faster than an ide disk.
But this:
Jun 12 11:01:20 gentoobox ata3: SError: { 10B8B Dispar BadCRC }
Jun 12 11:01:20 gentoobox ata3.00: cmd 60/40:00:c7:69:37/00:00:02:00:00/40 tag 0 ncq 32768 in
Jun 12 11:01:20 gentoobox res 41/00:00:c7:69:37/00:00:02:00:00/40 Emask 0x1 (device error)
IMHO looks like cable.
_________________
Study finds stunning lack of racial, gender, and economic diversity among middle-class white males
I identify as a dirty penismensch. |
|
| Back to top |
|
|
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
| Posted: Sun Jun 15, 2008 2:31 pm Post subject: |
|
|
| energyman76b wrote: | | d2_racing wrote: | | In fact, or maybe it's a hardware problem. A SATA hdd need to be faster then a IDE for my concern. |
why? an old sata hd might be nothing but an ide hd with a bolted-on converter. There is no guarantee at all that a sata disk is faster than an ide disk.
But this:
Jun 12 11:01:20 gentoobox ata3: SError: { 10B8B Dispar BadCRC }
Jun 12 11:01:20 gentoobox ata3.00: cmd 60/40:00:c7:69:37/00:00:02:00:00/40 tag 0 ncq 32768 in
Jun 12 11:01:20 gentoobox res 41/00:00:c7:69:37/00:00:02:00:00/40 Emask 0x1 (device error)
IMHO looks like cable. |
Checked all cables... and seems that's all ok... i don't know if cuold be a broken cable... the only thing i know is that, in this moment, emerge pretende is very slow calculating dependencies... but the system sems to be ok... no error messages in the log files... i think i will try test some dy under windows to see if the problem it's only linux related....
Also have some error like this:
| Code: | | Jun 15 16:17:02 gentoobox Buffer I/O error on device fd0, logical block 0 |
But i don't think it's relataed with my problem... |
|
| Back to top |
|
|
harrisonmetz
Tux's lil' helper
Joined: 24 Apr 2006
Posts: 93
Location: Chicago, IL
|
| Posted: Sun Jun 15, 2008 2:45 pm Post subject: |
|
|
| ReDirEct__ wrote: |
Also have some error like this:
| Code: | | Jun 15 16:17:02 gentoobox Buffer I/O error on device fd0, logical block 0 |
But i don't think it's relataed with my problem... |
No, but its annonying and it makes your system go a bit slower (like at bootup.) If you don't actually have a 3.5in floppy disk drive connected go into your bios and disable it. It should be in the first or second setting page. |
|
| Back to top |
|
|
manaka
Apprentice
Joined: 23 Jul 2007
Posts: 178
Location: Spain
|
| Posted: Mon Jun 16, 2008 7:02 pm Post subject: |
|
|
Seems definitely a data cable or connector problem... Try a different cable and a different motherboard connector...
_________________
Javier Miqueleiz
"Listen to your heart. It knows all things, because it came from the Soul of the World, and it will one day return there." |
|
| Back to top |
|
|
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
| Posted: Wed Jun 25, 2008 11:43 pm Post subject: |
|
|
Hi all again... i tried to change the sata cable, but nothing changed... when try to transfer big amount of data from a disk to another, my system disconnect the sata...
Found this thread: https://forums.gentoo.org/viewtopic-t-482731-postdays-0-postorder-asc-highlight-unresponsive-start-625.html
and tried to configure my kernel like the people say here, nut i don't know if can be related to my problem. In any way, cuold be my power supply?
edit: The problem occour also when i try to transfer from a partition to another one on the sata disk... |
|
| Back to top |
|
|
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
| Posted: Tue Jul 08, 2008 3:26 pm Post subject: |
|
|
please... i need your help... i've installed a new seagate 500gb hd and now the problems occour only on this one when transfer big amount of data... i don't know if can be related to the kernel... really i don't know what could be... cheked cable.. changed with new one... i've a 600w power supply and with old hd no power problems and i think the hard disk hang can't be related to that... now i'm trying to upgrade bios... if don't work i will zero fill all my hard disk... but after installed new hard disk i don't think it's a problem on the partition table... also because after system hang, on reboot, my bios recognize my first sata disk and not the new one... the problem seems related only on the last sata disk installed... could be a conflict problem with the ide hard disk???
This is the last log before rebot:
| Code: | Jul 8 16:56:03 gentoobox ata4: timeout waiting for ADMA IDLE, stat=0x440
Jul 8 16:56:33 gentoobox ata4.00: qc timeout (cmd 0x2f)
Jul 8 16:56:33 gentoobox ata4: failed to read log page 10h (errno=-5)
Jul 8 16:56:33 gentoobox ata4.00: exception Emask 0x1 SAct 0x7 SErr 0x380000 action 0x2 frozen
Jul 8 16:56:33 gentoobox ata4.00: CPB resp_flags 0x11: , CMD error
Jul 8 16:56:33 gentoobox ata4: SError: { 10B8B Dispar BadCRC }
Jul 8 16:56:33 gentoobox ata4.00: cmd 60/e8:00:a7:34:c0/01:00:17:00:00/40 tag 0 ncq 249856 in
Jul 8 16:56:33 gentoobox res 41/84:00:a7:34:c0/84:00:17:00:00/40 Emask 0x10 (ATA bus error)
Jul 8 16:56:33 gentoobox ata4.00: status: { DRDY ERR }
Jul 8 16:56:33 gentoobox ata4.00: error: { ICRC ABRT }
Jul 8 16:56:33 gentoobox ata4.00: cmd 60/18:08:8f:36:c0/00:00:17:00:00/40 tag 1 ncq 12288 in
Jul 8 16:56:33 gentoobox res 41/84:00:a7:34:c0/84:00:17:00:00/40 Emask 0x10 (ATA bus error)
Jul 8 16:56:33 gentoobox ata4.00: status: { DRDY ERR }
Jul 8 16:56:33 gentoobox ata4.00: error: { ICRC ABRT }
Jul 8 16:56:33 gentoobox ata4.00: cmd 60/88:10:a7:36:c0/00:00:17:00:00/40 tag 2 ncq 69632 in
Jul 8 16:56:33 gentoobox res 41/84:00:a7:34:c0/84:00:17:00:00/40 Emask 0x10 (ATA bus error)
Jul 8 16:56:33 gentoobox ata4.00: status: { DRDY ERR }
Jul 8 16:56:33 gentoobox ata4.00: error: { ICRC ABRT }
Jul 8 16:56:38 gentoobox ata4: port is slow to respond, please be patient (Status 0xc1)
Jul 8 16:56:43 gentoobox ata4: device not ready (errno=-16), forcing hardreset
Jul 8 16:56:43 gentoobox ata4: hard resetting link
Jul 8 16:56:48 gentoobox ata4: port is slow to respond, please be patient (Status 0x80)
Jul 8 16:56:53 gentoobox ata4: COMRESET failed (errno=-16)
Jul 8 16:56:53 gentoobox ata4: hard resetting link
Jul 8 16:56:58 gentoobox ata4: port is slow to respond, please be patient (Status 0x80)
Jul 8 16:57:03 gentoobox ata4: COMRESET failed (errno=-16)
Jul 8 16:57:03 gentoobox ata4: hard resetting link
Jul 8 16:57:08 gentoobox ata4: port is slow to respond, please be patient (Status 0x80) |
There should be some error message for ata3 too, but i don't konw why aren't there... in any way how can i know what devices ata3 and ata4 are? |
|
| Back to top |
|
|
ReDirEct__
Guru
Joined: 16 Mar 2006
Posts: 300
Location: Nola (NA) - Italy
|
| Posted: Tue Jul 08, 2008 4:05 pm Post subject: |
|
|
also this is smartctl -a /dev/sda log:
| Code: | smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9 family
Device Model: ST3250624AS
Serial Number: 3ND2B0N4
Firmware Version: 3.AAD
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 8 17:52:29 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 100) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 091 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 243
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 486481382
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13517
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 416
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 049 048 045 Old_age Always - 51 (Lifetime Min/Max 51/51)
194 Temperature_Celsius 0x0022 051 052 000 Old_age Always - 51 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 074 051 000 Old_age Always - 140933738
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 186 000 Old_age Always - 94
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 91 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 91 occurred at disk power-on lifetime: 13433 hours (559 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 2b ed 41 20 e0 Error: ICRC, ABRT 43 sectors at LBA = 0x002041ed = 2114029
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 7c 9c 41 20 e0 00 05:28:15.539 READ DMA EXT
25 ff 7c 20 41 20 e0 00 05:28:15.538 READ DMA EXT
25 ff 7c a4 40 20 e0 00 05:28:15.537 READ DMA EXT
25 ff 7c 28 40 20 e0 00 05:28:15.536 READ DMA EXT
25 ff 7c ac 3f 20 e0 00 05:28:15.535 READ DMA EXT
Error 90 occurred at disk power-on lifetime: 13433 hours (559 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 0b 4d 47 0b e0 Error: ICRC, ABRT 11 sectors at LBA = 0x000b474d = 739149
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 7c dc 46 0b e0 00 05:28:03.630 READ DMA EXT
25 ff 7c 60 46 0b e0 00 05:28:03.629 READ DMA EXT
25 ff 7c e4 45 0b e0 00 05:28:03.643 READ DMA EXT
25 ff 7c 68 45 0b e0 00 05:28:03.642 READ DMA EXT
25 ff 7c ec 44 0b e0 00 05:28:03.641 READ DMA EXT
Error 89 occurred at disk power-on lifetime: 13433 hours (559 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3b 31 6e e1 e0 Error: ICRC, ABRT 59 sectors at LBA = 0x00e16e31 = 14773809
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 7c f0 6d e1 e0 00 05:27:40.948 READ DMA EXT
25 ff 7c 74 6d e1 e0 00 05:27:40.947 READ DMA EXT
25 ff 7c f8 6c e1 e0 00 05:27:40.946 READ DMA EXT
25 ff 7c 7c 6c e1 e0 00 05:27:40.945 READ DMA EXT
25 ff 7c 00 6c e1 e0 00 05:27:40.944 READ DMA EXT
Error 88 occurred at disk power-on lifetime: 13433 hours (559 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 2b 31 f4 e0 e0 Error: ICRC, ABRT 43 sectors at LBA = 0x00e0f431 = 14742577
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 7c e0 f3 e0 e0 00 05:27:39.716 READ DMA EXT
25 ff 7c 64 f3 e0 e0 00 05:27:39.715 READ DMA EXT
25 ff 7c e8 f2 e0 e0 00 05:27:39.714 READ DMA EXT
25 ff 7c 6c f2 e0 e0 00 05:27:39.714 READ DMA EXT
25 ff 7c f0 f1 e0 e0 00 05:27:39.713 READ DMA EXT
Error 87 occurred at disk power-on lifetime: 13433 hours (559 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 5b c5 31 e0 e0 Error: ICRC, ABRT 91 sectors at LBA = 0x00e031c5 = 14692805
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 7c a4 31 e0 e0 00 05:27:38.353 READ DMA EXT
25 ff 7c 28 31 e0 e0 00 05:27:38.352 READ DMA EXT
25 ff 7c ac 30 e0 e0 00 05:27:38.351 READ DMA EXT
25 ff 7c 30 30 e0 e0 00 05:27:38.350 READ DMA EXT
25 ff 7c b4 2f e0 e0 00 05:27:38.349 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13430 -
# 2 Extended offline Interrupted (host reset) 90% 13428 -
# 3 Extended offline Aborted by host 90% 13428 -
# 4 Extended offline Aborted by host 90% 13428 -
# 5 Extended offline Aborted by host 90% 13428 -
# 6 Short offline Completed without error 00% 180 -
# 7 Short offline Completed without error 00% 25 -
# 8 Extended offline Interrupted (host reset) 40% 22 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
Now i'm doing self test on new sata... |
|
| Back to top |
|
|
|
Kernel & Hardware
