| View previous topic :: View next topic |
| Author |
Message |
dusanc
Apprentice
Joined: 19 Sep 2005
Posts: 248
Location: Serbia
|
 Posted: Wed Aug 13, 2008 1:29 pm Post subject: |
 |
|
Wouldn't these settings make VFS flush larger ammount of dirty pages (cause of larger interval between flushing) so that flush storms can occur?
Data loss on power failure between flushes is increased, right?
Dunno it's all compromise depending on usage scenario.
What do you think? |
|
| Back to top |
|
 |
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Wed Aug 13, 2008 1:53 pm Post subject: |
|
|
| dusanc wrote: | Wouldn't these settings make VFS flush larger ammount of dirty pages (cause of larger interval between flushing) so that flush storms can occur?
Data loss on power failure between flushes is increased, right?
Dunno it's all compromise depending on usage scenario.
What do you think? |
yes, you're right, 
this was mainly optimized for workloads on my laptop but also turned out to work nice on my desktop,
considering the risk of data loss & the performance gains I get it's worth it (at least for me),
a common practice of me after / during work with critical data also is to execute 'sync' manually 
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004  |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
|
| Back to top |
|
|
gimpel
Advocate
Joined: 15 Oct 2004
Posts: 2720
Location: Munich, Bavaria
|
| Posted: Wed Aug 13, 2008 3:35 pm Post subject: |
|
|
The paravirt "issue" has been there since paravirt support was introduced. Nothing new.
_________________
http://proaudio.tuxfamily.org/wiki - pro-audio software overlay
|
|
| Back to top |
|
|
keenblade
Veteran
Joined: 03 Oct 2004
Posts: 1087
|
| Posted: Thu Aug 14, 2008 11:41 am Post subject: |
|
|
It seems I can't install 2.6.27-rc2-zen1. It gives this error:
| Code: |
make[1]: *** No rule to make target `n/n', needed by `firmware/n.gen.o'. Stop.
make: *** [firmware] Error 2
|
I compiled 2.6.26-zen1 successfully with the same .config. I don't try to compile any firmware myself.
Although I choosed N for new kernel options for firmware, it fails to compile.
What must I do?
My kernel options:
*Select only drivers that don't need compile-time external firmware [Y]
*Prevent firmware from being built [Y]
*Userspace firmware loading support [m]
**Include in-kernel firmware blobs in kernel binary [n]
**External firmware blobs to build into the kernel binary:n [n]
**Firmware blobs root directory:n [n]
_________________
Anyway it's all the same at the end...
Need help to get it working: "x-fi surround 5.1" |
|
| Back to top |
|
|
rmh3093
Advocate
Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY
|
| Posted: Thu Aug 14, 2008 1:55 pm Post subject: |
|
|
| keenblade wrote: | It seems I can't install 2.6.27-rc2-zen1. It gives this error:
| Code: |
make[1]: *** No rule to make target `n/n', needed by `firmware/n.gen.o'. Stop.
make: *** [firmware] Error 2
|
I compiled 2.6.26-zen1 successfully with the same .config. I don't try to compile any firmware myself.
Although I choosed N for new kernel options for firmware, it fails to compile.
What must I do?
My kernel options:
*Select only drivers that don't need compile-time external firmware [Y]
*Prevent firmware from being built [Y]
*Userspace firmware loading support [m]
**Include in-kernel firmware blobs in kernel binary [n]
**External firmware blobs to build into the kernel binary:n [n]
**Firmware blobs root directory:n [n] |
thats because the bug from rc1 didnt get fixed in rc2 and I need to apply the fix still
_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Thu Aug 14, 2008 2:44 pm Post subject: |
|
|
| rmh3093 wrote: | | keenblade wrote: | It seems I can't install 2.6.27-rc2-zen1. It gives this error:
| Code: |
make[1]: *** No rule to make target `n/n', needed by `firmware/n.gen.o'. Stop.
make: *** [firmware] Error 2
|
I compiled 2.6.26-zen1 successfully with the same .config. I don't try to compile any firmware myself.
Although I choosed N for new kernel options for firmware, it fails to compile.
What must I do?
My kernel options:
*Select only drivers that don't need compile-time external firmware [Y]
*Prevent firmware from being built [Y]
*Userspace firmware loading support [m]
**Include in-kernel firmware blobs in kernel binary [n]
**External firmware blobs to build into the kernel binary:n [n]
**Firmware blobs root directory:n [n] |
thats because the bug from rc1 didnt get fixed in rc2 and I need to apply the fix still |
how about rc3 ? was it fixed meanwhile ?
are you guys also experiencing lags with X under "heavy" load (>2.5): the mouse pointer and keyboard are acting very lazy
development with the scheduler is "A good thing" (TM) but with .27-rc* it's getting worse again, hopefully rc3 & onwards improves behavior again otherwise I need to renice stuff all the time 
are there severe regressions on rc3 preventing them from being merged ? (I remember reading about one on PowerPC)
thanks
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004 |
|
| Back to top |
|
|
keenblade
Veteran
Joined: 03 Oct 2004
Posts: 1087
|
| Posted: Thu Aug 14, 2008 4:56 pm Post subject: |
|
|
My bad, after removing the wrong value "n" for firmware, it compiled fine.
But now alsa-driver-9999 does not compile;
| Code: |
/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.c: In function 'resize_info_buffer':
/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.c:90: error: implicit declaration of function 'PAGE_ALIGN'
make[3]: *** [/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore] Error 2
make[1]: *** [_module_/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.27-rc2-zen1'
make: *** [compile] Error 2
* The specific snippet of code:
* emake LDFLAGS="$(raw-ldflags)" HOSTCC="$(tc-getBUILD_CC)" CC="$(tc-getCC)" || die "Make Failed";
* The die message:
* Make Failed
|
Any idea?
Also uname says "2.6.27-rc2-zen1-01492-g55fcb3d-dirty". What is the part "-01492-g55fcb3d-dirty"? A git thing?
_________________
Anyway it's all the same at the end...
Need help to get it working: "x-fi surround 5.1" |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
|
| Back to top |
|
|
rmh3093
Advocate
Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY
|
| Posted: Thu Aug 14, 2008 7:54 pm Post subject: |
|
|
| kernelOfTruth wrote: | @rmh3093, gimpel:
since you guys are pretty experienced with git, could you please post some instruction on how to do the tree-updating locally ?
1.) e.g. updating from rc2 -> rc3; rc4 -> r5 (this should be done by pulling the mainline-stuff from linus' tree)
2.) merging the sub-trees into that one
what folder-structure does one need in order to do so ?
many thanks in advance |
something in rc3 u want so bad?
_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Thu Aug 14, 2008 7:57 pm Post subject: |
|
|
| rmh3093 wrote: | | kernelOfTruth wrote: | @rmh3093, gimpel:
since you guys are pretty experienced with git, could you please post some instruction on how to do the tree-updating locally ?
1.) e.g. updating from rc2 -> rc3; rc4 -> r5 (this should be done by pulling the mainline-stuff from linus' tree)
2.) merging the sub-trees into that one
what folder-structure does one need in order to do so ?
many thanks in advance |
something in rc3 u want so bad? |
yeah, the scheduler, lockdep fixes and sky2-stuff (these scheduler problems causes headaches for me: heavy load & working isn't possible anymore; I believe that those won'T be fixed until final but hopefully this makes a change ...)
it would nevertheless be nice to have the knowledge to do this stuff locally 
sorry for bothering you
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004
Last edited by kernelOfTruth on Fri Aug 15, 2008 8:57 am; edited 1 time in total |
|
| Back to top |
|
|
Diskmaster
n00b
Joined: 13 Jul 2008
Posts: 23
|
| Posted: Thu Aug 14, 2008 8:25 pm Post subject: |
|
|
| keenblade wrote: | My bad, after removing the wrong value "n" for firmware, it compiled fine.
But now alsa-driver-9999 does not compile;
| Code: |
/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.c: In function 'resize_info_buffer':
/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.c:90: error: implicit declaration of function 'PAGE_ALIGN'
make[3]: *** [/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore/info.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/acore] Error 2
make[1]: *** [_module_/var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.27-rc2-zen1'
make: *** [compile] Error 2
* The specific snippet of code:
* emake LDFLAGS="$(raw-ldflags)" HOSTCC="$(tc-getBUILD_CC)" CC="$(tc-getCC)" || die "Make Failed";
* The die message:
* Make Failed
|
Any idea?
Also uname says "2.6.27-rc2-zen1-01492-g55fcb3d-dirty". What is the part "-01492-g55fcb3d-dirty"? A git thing? |
Don't bother with alsa-driver-9999, it's still fetching from a dead hg repo. (They've switched to git and whoever is responsible for the ebuild in tree hasn't updated yet. You could try alsa-driver-1.0.17-r2 from http://repo.or.cz/w/gentoo-diskmaster-overlay.git
_________________
Linux polished-diamond 3.0.9-00003-g3c676b1 x86_64 Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz GenuineIntel GNU/Linux
Something witty goes here. |
|
| Back to top |
|
|
karafeka
Tux's lil' helper
Joined: 02 Aug 2004
Posts: 89
|
| Posted: Fri Aug 15, 2008 9:26 am Post subject: virtualbox modules 2.6.26-zenrt1 |
|
|
I have Linux localhost 2.6.26-zenrt1 #6 PREEMPT RT.
When compiling virtualbox e.g. virtualbox-modules 1.6.4 I get this error:
| Code: |
CONFIG_VBOXDRV_AS_MISC -DRT_ARCH_X86 -DUSE_NEW_OS_INTERFACE_FOR_MM -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(mp_r0drv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.o /var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:200:74: error: macro "on_each_cpu" passed 4 arguments, but takes just 3
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c: In function 'RTMpOnAll':
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:200: error: 'on_each_cpu' undeclared (first use in this function)
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:200: error: (Each undeclared identifier is reported only once
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:200: error: for each function it appears in.)
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:241:80: error: macro "smp_call_function" passed 4 arguments, but takes just 3
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c: In function 'RTMpOnOthers':
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:241: error: 'smp_call_function' undeclared (first use in this function)
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:297:102: error: macro "smp_call_function_single" passed 5 arguments, but takes just 4
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c: In function 'RTMpOnSpecific':
/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.c:297: error: 'smp_call_function_single' undeclared (first use in this function)
make[2]: *** [/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv/r0drv/linux/mp-r0drv-linux.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/var/tmp/portage/app-emulation/virtualbox-modules-1.6.4/work/vboxdrv] Error 2
make[1]: Leaving directory `/usr/src/zenrt-sources'
make: *** [vboxdrv] Error 2
|
I tried also with zen-overlay virtualbox modules, but it's the same.
There is patch only for 2.6.27, is there also patch for 2.6.26 ?
Regards |
|
| Back to top |
|
|
keenblade
Veteran
Joined: 03 Oct 2004
Posts: 1087
|
| Posted: Fri Aug 15, 2008 2:55 pm Post subject: |
|
|
| Diskmaster wrote: |
Don't bother with alsa-driver-9999, it's still fetching from a dead hg repo. (They've switched to git and whoever is responsible for the ebuild in tree hasn't updated yet. You could try alsa-driver-1.0.17-r2 from http://repo.or.cz/w/gentoo-diskmaster-overlay.git |
Hi, Diskmaster. I tried your ebuilds (alsa-headers-1.0.17.ebuild and alsa-driver-1.0.17-r2).
Alsa headers compiled fine, but alsa-driver failed with the log belove;
| Code: |
patching file pcm_native.c
Hunk #2 FAILED at 22.
Hunk #4 succeeded at 1584 (offset 5 lines).
Hunk #5 FAILED at 2833.
Hunk #6 succeeded at 2876 with fuzz 2 (offset -5 lines).
Hunk #7 succeeded at 2903 (offset -6 lines).
Hunk #8 succeeded at 2919 with fuzz 2 (offset -6 lines).
Hunk #9 succeeded at 2949 with fuzz 1 (offset -2 lines).
Hunk #10 succeeded at 3035 (offset -4 lines).
Hunk #11 succeeded at 3054 (offset -4 lines).
Hunk #12 succeeded at 3068 (offset -4 lines).
Hunk #13 succeeded at 3126 (offset -3 lines).
Hunk #14 succeeded at 3154 (offset -3 lines).
Hunk #15 succeeded at 3212 (offset -2 lines).
Hunk #16 succeeded at 3241 (offset -2 lines).
Hunk #17 succeeded at 3271 (offset -2 lines).
Hunk #18 succeeded at 3349 (offset -2 lines).
Hunk #19 succeeded at 3381 (offset -2 lines).
Hunk #20 succeeded at 3447 (offset -1 lines).
Hunk #21 succeeded at 3476 with fuzz 2 (offset -2 lines).
Hunk #22 succeeded at 3517 (offset -5 lines).
Hunk #23 succeeded at 3667 (offset -5 lines).
2 out of 23 hunks FAILED -- saving rejects to file pcm_native.c.rej
copying file alsa-kernel/core/init.c
patching file init.c
Hunk #4 FAILED at 565.
1 out of 4 hunks FAILED -- saving rejects to file init.c.rej
make[2]: *** [pcm_native.c] Hata 1
make[2]: *** Bitmemiş işler için bekliyor....
make[2]: *** [init.c] Hata 1
copying file alsa-kernel/core/sound.c
patching file sound.c
Hunk #2 succeeded at 41 (offset 1 line).
Hunk #3 succeeded at 52 (offset 1 line).
Hunk #4 succeeded at 173 (offset -11 lines).
Hunk #5 FAILED at 251.
Hunk #6 succeeded at 259 (offset -15 lines).
Hunk #7 succeeded at 276 (offset -15 lines).
Hunk #8 succeeded at 300 (offset -15 lines).
Hunk #9 succeeded at 355 (offset -15 lines).
Hunk #10 succeeded at 366 (offset -15 lines).
Hunk #11 succeeded at 392 (offset -15 lines).
Hunk #12 succeeded at 499 (offset -15 lines).
1 out of 12 hunks FAILED -- saving rejects to file sound.c.rej
make[2]: *** [sound.c] Hata 1
make[2]: `/var/tmp/portage/media-sound/alsa-driver-1.0.17-r2/work/alsa-driver-1.0.17/acore' dizininden çıkılıyor
make[1]: *** [dep] Hata 1
make[1]: `/var/tmp/portage/media-sound/alsa-driver-1.0.17-r2/work/alsa-driver-1.0.17' dizininden çıkılıyor
make: *** [include/sndversions.h] Hata 2
*
* ERROR: media-sound/alsa-driver-1.0.17-r2 failed.
|
Also zen-overlay alsa-driver-1.0.17-r1 and portage alsa-driver-1.0.17 fail, too.
_________________
Anyway it's all the same at the end...
Need help to get it working: "x-fi surround 5.1" |
|
| Back to top |
|
|
tranquilcool
Veteran
Joined: 25 Mar 2005
Posts: 1179
|
| Posted: Fri Aug 15, 2008 6:14 pm Post subject: |
|
|
| keenblade wrote: | | Diskmaster wrote: |
Don't bother with alsa-driver-9999, it's still fetching from a dead hg repo. (They've switched to git and whoever is responsible for the ebuild in tree hasn't updated yet. You could try alsa-driver-1.0.17-r2 from http://repo.or.cz/w/gentoo-diskmaster-overlay.git |
Hi, Diskmaster. I tried your ebuilds (alsa-headers-1.0.17.ebuild and alsa-driver-1.0.17-r2).
Alsa headers compiled fine, but alsa-driver failed with the log belove;
| Code: |
patching file pcm_native.c
Hunk #2 FAILED at 22.
Hunk #4 succeeded at 1584 (offset 5 lines).
Hunk #5 FAILED at 2833.
Hunk #6 succeeded at 2876 with fuzz 2 (offset -5 lines).
Hunk #7 succeeded at 2903 (offset -6 lines).
Hunk #8 succeeded at 2919 with fuzz 2 (offset -6 lines).
Hunk #9 succeeded at 2949 with fuzz 1 (offset -2 lines).
Hunk #10 succeeded at 3035 (offset -4 lines).
Hunk #11 succeeded at 3054 (offset -4 lines).
Hunk #12 succeeded at 3068 (offset -4 lines).
Hunk #13 succeeded at 3126 (offset -3 lines).
Hunk #14 succeeded at 3154 (offset -3 lines).
Hunk #15 succeeded at 3212 (offset -2 lines).
Hunk #16 succeeded at 3241 (offset -2 lines).
Hunk #17 succeeded at 3271 (offset -2 lines).
Hunk #18 succeeded at 3349 (offset -2 lines).
Hunk #19 succeeded at 3381 (offset -2 lines).
Hunk #20 succeeded at 3447 (offset -1 lines).
Hunk #21 succeeded at 3476 with fuzz 2 (offset -2 lines).
Hunk #22 succeeded at 3517 (offset -5 lines).
Hunk #23 succeeded at 3667 (offset -5 lines).
2 out of 23 hunks FAILED -- saving rejects to file pcm_native.c.rej
copying file alsa-kernel/core/init.c
patching file init.c
Hunk #4 FAILED at 565.
1 out of 4 hunks FAILED -- saving rejects to file init.c.rej
make[2]: *** [pcm_native.c] Hata 1
make[2]: *** Bitmemiş işler için bekliyor....
make[2]: *** [init.c] Hata 1
copying file alsa-kernel/core/sound.c
patching file sound.c
Hunk #2 succeeded at 41 (offset 1 line).
Hunk #3 succeeded at 52 (offset 1 line).
Hunk #4 succeeded at 173 (offset -11 lines).
Hunk #5 FAILED at 251.
Hunk #6 succeeded at 259 (offset -15 lines).
Hunk #7 succeeded at 276 (offset -15 lines).
Hunk #8 succeeded at 300 (offset -15 lines).
Hunk #9 succeeded at 355 (offset -15 lines).
Hunk #10 succeeded at 366 (offset -15 lines).
Hunk #11 succeeded at 392 (offset -15 lines).
Hunk #12 succeeded at 499 (offset -15 lines).
1 out of 12 hunks FAILED -- saving rejects to file sound.c.rej
make[2]: *** [sound.c] Hata 1
make[2]: `/var/tmp/portage/media-sound/alsa-driver-1.0.17-r2/work/alsa-driver-1.0.17/acore' dizininden çıkılıyor
make[1]: *** [dep] Hata 1
make[1]: `/var/tmp/portage/media-sound/alsa-driver-1.0.17-r2/work/alsa-driver-1.0.17' dizininden çıkılıyor
make: *** [include/sndversions.h] Hata 2
*
* ERROR: media-sound/alsa-driver-1.0.17-r2 failed.
|
Also zen-overlay alsa-driver-1.0.17-r1 and portage alsa-driver-1.0.17 fail, too. |
any specific reason you don't use the kernel drivers?
_________________
this is a strange strange world. |
|
| Back to top |
|
|
keenblade
Veteran
Joined: 03 Oct 2004
Posts: 1087
|
| Posted: Fri Aug 15, 2008 7:38 pm Post subject: |
|
|
| tranquilcool wrote: |
any specific reason you don't use the kernel drivers? |
Actually not. I just prefer the latest code. A bad habit. 
I just love live ebuilds.
There was an old thread that explains why not kernel drivers. I was in there.
_________________
Anyway it's all the same at the end...
Need help to get it working: "x-fi surround 5.1" |
|
| Back to top |
|
|
mieszkoslusarczyk
Tux's lil' helper
Joined: 16 Jul 2008
Posts: 92
Location: Kraków/Poland
|
| Posted: Fri Aug 15, 2008 7:42 pm Post subject: |
|
|
| If you don't want to merge squash+LZMA, could you at least provide a squashfs patch you used so I could unmerge it from the newest zen git sources, and then apply the squash+LZMA patch myself? |
|
| Back to top |
|
|
Diskmaster
n00b
Joined: 13 Jul 2008
Posts: 23
|
| Posted: Sat Aug 16, 2008 7:46 am Post subject: |
|
|
| keenblade wrote: | | Diskmaster wrote: |
Don't bother with alsa-driver-9999, it's still fetching from a dead hg repo. (They've switched to git and whoever is responsible for the ebuild in tree hasn't updated yet. You could try alsa-driver-1.0.17-r2 from http://repo.or.cz/w/gentoo-diskmaster-overlay.git |
Hi, Diskmaster. I tried your ebuilds (alsa-headers-1.0.17.ebuild and alsa-driver-1.0.17-r2).
Alsa headers compiled fine, but alsa-driver failed with the log belove;
(code block removed)
Also zen-overlay alsa-driver-1.0.17-r1 and portage alsa-driver-1.0.17 fail, too. |
Added alsa-driver-1.0.17-r3 but it's probably not going to help you. Wait for -rc3-zen* (assuming cheater or rmh pulls in alsa-kernel-git!)
_________________
Linux polished-diamond 3.0.9-00003-g3c676b1 x86_64 Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz GenuineIntel GNU/Linux
Something witty goes here. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Sat Aug 16, 2008 11:12 am Post subject: |
|
|
| rmh3093 wrote: | | kernelOfTruth wrote: | @rmh3093, gimpel:
since you guys are pretty experienced with git, could you please post some instruction on how to do the tree-updating locally ?
1.) e.g. updating from rc2 -> rc3; rc4 -> r5 (this should be done by pulling the mainline-stuff from linus' tree)
2.) merging the sub-trees into that one
what folder-structure does one need in order to do so ?
many thanks in advance |
something in rc3 u want so bad? |
scheduler fixes FTW !
besides that the intel-hda drivers seems to have problems with stereo-output (at least the sigmatel one)
in addition to that I'm also experiencing the heavy i/o lagging on ~amd64 (see in the amd64 subforum)
any chance to get a pull from .27-rc4 when it's out ? (hopefully most of the scheduler-issues should be adressed / fixed then)
just wanted to give a intermediate report concerning reiser4:
it's rockstable & even survives heavy loads such as compilation of openoffice + working with other browers (opera, firefox) and other stuff concurrently
thanks for getting it to run with .27 / .27-rc*-zen
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004
Last edited by kernelOfTruth on Sat Aug 16, 2008 7:34 pm; edited 1 time in total |
|
| Back to top |
|
|
rmh3093
Advocate
Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY
|
| Posted: Sat Aug 16, 2008 3:16 pm Post subject: |
|
|
For those of you who have not been looking in the git-repo, I rewrote the "zen-tunables" patch... its still a work in progress but its mostly done and working. The "tunables" are now called "system layouts" and you still can select in kconfig like you normally did (same with the CFS boost option). However I changed the backend allowing the system layouts and the privileged nice level to be configured while the system is running by reading and writing to the files in /sys/kernel/zen
| Code: | Redman zen-sources # ls /sys/kernel/zen/
custom_system_layout sched_privileged_nice_level system_layout
Redman zen-sources # cat /sys/kernel/zen/sched_privileged_nice_level
-8
Redman zen-sources # cat /sys/kernel/zen/system_layout
server file-server gaming desktop ll-desktop [custom]
Redman zen-sources # ls /sys/kernel/zen/custom_system_layout/
sched_latency sched_min_granularity sched_wakeup_granularity vm_dirty_ratio vm_swappiness
|
Reading from all the files should work, writing only works on sched_privileged_nice_level right now
also... the sys interface can be ebuilt as a module, just modprobe zen-tune
_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
| Posted: Sat Aug 16, 2008 7:35 pm Post subject: |
|
|
| rmh3093 wrote: | For those of you who have not been looking in the git-repo, I rewrote the "zen-tunables" patch... its still a work in progress but its mostly done and working. The "tunables" are now called "system layouts" and you still can select in kconfig like you normally did (same with the CFS boost option). However I changed the backend allowing the system layouts and the privileged nice level to be configured while the system is running by reading and writing to the files in /sys/kernel/zen
| Code: | Redman zen-sources # ls /sys/kernel/zen/
custom_system_layout sched_privileged_nice_level system_layout
Redman zen-sources # cat /sys/kernel/zen/sched_privileged_nice_level
-8
Redman zen-sources # cat /sys/kernel/zen/system_layout
server file-server gaming desktop ll-desktop [custom]
Redman zen-sources # ls /sys/kernel/zen/custom_system_layout/
sched_latency sched_min_granularity sched_wakeup_granularity vm_dirty_ratio vm_swappiness
|
Reading from all the files should work, writing only works on sched_privileged_nice_level right now
also... the sys interface can be ebuilt as a module, just modprobe zen-tune |
hehe - finally
thanks !
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004 |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sat Aug 16, 2008 8:27 pm Post subject: |
|
|
I'm almost done bumping the git tree to rc3, i haven't pushed master yet.
I'm planning to tag and release it as well.
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sun Aug 17, 2008 1:05 am Post subject: |
|
|
We need thread part 5, kerneloftruth or someone else can go ahead and do that.
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
|
| Back to top |
|
|
|
Unsupported Software
