View previous topic :: View next topic |
Author |
Message |
dracula1985 Apprentice
Joined: 13 May 2005 Posts: 299 Location: Vicenza (Italy)
|
Posted: Fri Jun 20, 2008 5:21 pm Post subject: 046d:08da Logitech, Inc. QuickCam Messanger don't work |
|
|
I connected a Logitech QuickCam Messenger to my gentoo box, then I emerged media-video/qc-usb-messenger.
After some work and some reboots I still can't get it working...
dmesg | grep quickcam:
Code: | quickcam [43.006778]: ----------LOADING QUICKCAM MODULE------------
quickcam [43.006783]: struct quickcam size: 5968
quickcam: QuickCam USB camera found (driver version QuickCam Messenger/Communicate USB 1.7 $Date: 2007/09/02 00:00:00 $)
quickcam: Kernel:2.6.25-gentoo-r5 bus:2 class:FF subclass:FF vendor:046D product:08DA
quickcam [43.008063]: poisoning qc in qc_usb_init
quickcam [43.010867]: Failed qc_stv_set()=-32
quickcam [43.010872]: qc_stv_set STV_ISO_ENABLE=0 failed -32
quickcam [43.010876]: failed qc_usb_init()=-32
usbcore: registered new interface driver quickcam |
lsusb:
Code: | Bus 005 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 001: ID 1d6b:0002
Bus 004 Device 004: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 004 Device 002: ID 046d:c312 Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 002 Device 001: ID 1d6b:0001 |
I have also an ASUSTeK P7131 Hybrid card on the same box. _________________ Marco
"Man is least himself when he talks in his own person. Give him a mask, and he will tell you the truth." --Oscar Wilde. |
|
Back to top |
|
|
mjf55 Guru
Joined: 25 Aug 2007 Posts: 372
|
|
Back to top |
|
|
Tolstoi l33t
Joined: 20 May 2004 Posts: 678
|
Posted: Sun Jan 11, 2009 8:24 am Post subject: |
|
|
Hi,
I have the same Quickcam Messenger (same ID etc.) and it used to work fine up to kernel 2.6.26 with the gspcav1 driver which appears to be the successor of the spcaxx driver for this cam. After upgrading the kernel (now 2.6.28 ) compiling gspcav1 doesn't work anymore and if I'm not wrong here it won't since kernel 2.6.27 because you are meant to use the built in cam drivers.
My problem is to find the right driver. The quicktime messenger doesn't work nor do the GSPCA based ones from gspca-spca500 - 561 which should be one of the working ones following this website.
I'll go through all the drivers again but it's really no fun . |
|
Back to top |
|
|
Tolstoi l33t
Joined: 20 May 2004 Posts: 678
|
Posted: Sun Jan 11, 2009 10:46 am Post subject: |
|
|
Got it working now with the gspca-zc3xx module. Yay ! Try it, it supports a lot of chips. |
|
Back to top |
|
|
|