[RESOLVED]Samba error: tree connect failed: NT_STATUS_BAD_N

[harlanb]

Hello,
I'm running Samba on my Gentoo system with various Windows clients connecting; even from my own Gentoo system, I can't connect.

$ smbclient -U hbloom //hbloom03d.ptcnet.ptc.com/home
Password:
Anonymous login successful
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.28a]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME

$ smbclient -U hbloom //hbloom03d.ptcnet.ptc.com/home
Password:
Anonymous login successful
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.28a]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME

Here is my smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
;workgroup = PTCNET.PTC.COM
;workgroup = hbloom03d
workgroup = WORKGROUP

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
; netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
;server string = hbloom03d.ptcnet.ptc.com
server string = hbloom03d

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = cups

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
log level = 5

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
;hosts allow = 192.168. 132.253. 127.

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# Allow users to map to guest:
#map to guest = Bad User
map to guest = nobody

# Security mode. Most people will want user level security. See
# security_level.txt for details.
;security = server
;security = domain
security = user
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
; password server = <NT-Server-Name>
; password server = *
;password server = ah-mp2

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
encrypt passwords = yes
;smb passwd file = /etc/samba/private/smbpasswd

# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
; pam password change = yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n ;*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
# and gid's. idmap uid and idmap gid are the only required parameters.
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
; winbind separator = +
#
# winbind use default domain allows you to have winbind return usernames
# in the form user instead of DOMAIN+user for the domain listed in the
# workgroup parameter.
; winbind use default domain = yes
#
# template homedir determines the home directory for winbind users, with
# %D expanding to their domain name and %U expanding to their username:
; template homedir = /home/%D/%U

# When using winbind, you may want to have samba create home directories
# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
# using 'service=system-auth-winbind' in pam_stack modules, and then
# enable obedience of pam restrictions below:
; obey pam restrictions = yes

#
# template shell determines the shell users authenticated by winbind get
; template shell = /bin/bash

# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
domain master = no

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roaming profiles for WinNT and Win2k
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile


# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or when adding
# users via the Windows NT Tools (ie User Manager for Domains).

# Scripts for file (passwd, smbpasswd) backend:
; add user script = /usr/sbin/useradd -s /bin/false '%u'
; delete user script = /usr/sbin/userdel '%s'
; add user to group script = /usr/bin/gpasswd -a '%u' '%g'
; delete user from group script = /usr/bin/gpasswd -d '%u' '%g'
; set primary group script = /usr/sbin/usermod -g '%g' '%u'
; add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}'
; delete group script = /usr/sbin/groupdel '%g'

# Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller.
# Needs IDEALX scripts, and configuration in smbldap_conf.pm.
# This assumes you've installed the IDEALX scripts into /usr/share/samba/scripts...
; add user script = /usr/share/samba/scripts/smbldap-useradd.pl '%u'
; delete user script = /usr/share/samba/scripts/smbldap-userdel.pl '%u'
; add user to group script = /usr/share/samba/scripts/smbldap-groupmod.pl -m '%u' '%g'
; delete user from group script = /usr/share/samba/scripts/smbldap-groupmod.pl -x '%u' '%g'
; set primary group script = /usr/share/samba/scripts/smbldap-usermod.pl -g '%g' '%u'
; add group script = /usr/share/samba/scripts/smbldap-groupadd.pl '%g' && /usr/share/samba/scripts/smbldap-groupshow.pl %g|awk '/^gidNumber:/ {print $2}'
; delete group script = /usr/share/samba/scripts/smbldap-userdel.pl '%g'


# The add machine script is use by a samba server configured as a domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false '%u'
# Script for domain controller with LDAP backend for adding machines (You need
# the IDEALX scripts, and to configure the smbldap_conf.pm first):
; add machine script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null -g machines -c 'Machine Account' -s /bin/false '%u'

# Domain groups:
# Domain groups are now configured by using the 'net groupmap' tool

# Samba Password Database configuration:
# Samba now has runtime-configurable password database backends.
# smbpasswd is for backwards compatibility only Default (not recommended),
# new installations should use tdbsam or ldap.
passdb backend = smbpasswd
# TDB backend
; passdb backend = tdbsam
# LDAP with fallback to smbpasswd guest
# Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below.
; passdb backend = ldapsam:ldaps://ldap.mydomain.com
# Use the samba2 LDAP schema:
; passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com

# idmap uid account range:
# This is a range of unix user-id's that samba will map non-unix RIDs to,
# such as when using Winbind
; idmap uid = 10000-20000
; idmap gid = 10000-20000

# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by
# running 'smbpasswd -w mypassword'
; ldap admin dn = cn=root,dc=mydomain,dc=com
; ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
; ldap suffix = dc=mydomain,dc=com
; ldap server = ldap.mydomain.com
# Seperate suffixes are available for machines, users, groups, and idmap, if
# ldap suffix appears first, it is appended to the specific suffix.
# Example for a unix-ish directory layout:
; ldap machine suffix = ou=Hosts
; ldap user suffix = ou=People
; ldap group suffix = ou=Group
; ldap idmap suffix = ou=Idmap
# Example for AD-ish layout:
; ldap machine suffix = cn=Computers
; ldap user suffix = cn=Users
; ldap group suffix = cn=Groups
; ldap idmap suffix = cn=Idmap


# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins host lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Czech), 861 (???), 932 (Japanese),
# 936 (Simplified Chin.), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# More detail about code page is in
# "http://www.microsoft.com/globaldev/reference/oslocversion.mspx"
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
; dos charset = 850
; unix charset = ISO8859-1
unix charset = ISO8859-2
display charset = ISO8859-2



#============================ Share Definitions ==============================
;[home]
; comment = Home Directories
; browseable = no
; writable = yes
# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in the samba docs for details
; vfs object = /usr/lib/samba/vfs/recycle.so

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
;root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; ; then mkdir -pm700 $PROFILE; chown %u:%g $PROFILE;fi

# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
wins support = no
restrict anonymous = no
preferred master = no
max protocol = NT
acl compatibility = winnt
ldap ssl = No
server signing = Auto

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# set to yes to allow user 'guest account' to print.
guest ok = yes
printable = yes

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/Samba-HOWTO-Collection.pdf
[print$]
path = /var/lib/samba/printers
write list = @adm root
guest ok = yes

[data2]
path = /data2/
case sensitive = yes
strict locking = no
hide dot files = no
msdfs proxy = no
guest ok = yes
read only = no

[data]
path = /data/
case sensitive = yes
strict locking = no
hide dot files = no
msdfs proxy = no
guest ok = yes
read only = no

[home]
path = /home/hbloom/
case sensitive = yes
strict locking = no
msdfs proxy = no
guest ok = yes
read only = no

# smbd -b
Build environment:
Built by: root@hbloom03d
Built on: Tue Jul 8 16:54:34 CDT 2008
Built using: x86_64-pc-linux-gnu-gcc
Build host: Linux hbloom03d 2.6.24-gentoo-r4 #1 SMP Fri May 2 12:47:02 CDT 2008 x86_64 Intel(R) Xeon(TM) CPU 3.20GHz GenuineIntel GNU/Linux
SRCDIR: /var/tmp/portage/net-fs/samba-3.0.28a-r1/work/samba-3.0.28a/source
BUILDDIR: /var/tmp/portage/net-fs/samba-3.0.28a-r1/work/samba-3.0.28a/source

Paths:
SBINDIR: /usr/sbin
BINDIR: /usr/bin
SWATDIR: /usr/share/doc/samba-3.0.28a-r1/swat
CONFIGFILE: /etc/samba/smb.conf
LOGFILEBASE: /var/log/samba
LMHOSTSFILE: /etc/samba/lmhosts
LIBDIR: /usr/lib64/samba
SHLIBEXT: so
LOCKDIR: /var/cache/samba
PIDDIR: /var/run/samba
SMB_PASSWD_FILE: /var/lib/samba/private/smbpasswd
PRIVATE_DIR: /var/lib/samba/private

System Headers:
HAVE_SYS_ACL_H
HAVE_SYS_CDEFS_H
HAVE_SYS_FCNTL_H
HAVE_SYS_IOCTL_H
HAVE_SYS_IPC_H
HAVE_SYS_MMAN_H
HAVE_SYS_MOUNT_H
HAVE_SYS_PARAM_H
HAVE_SYS_PRCTL_H
HAVE_SYS_RESOURCE_H
HAVE_SYS_SELECT_H
HAVE_SYS_SHM_H
HAVE_SYS_SOCKET_H
HAVE_SYS_STATFS_H
HAVE_SYS_STATVFS_H
HAVE_SYS_STAT_H
HAVE_SYS_SYSCALL_H
HAVE_SYS_SYSLOG_H
HAVE_SYS_SYSMACROS_H
HAVE_SYS_TIME_H
HAVE_SYS_TYPES_H
HAVE_SYS_UIO_H
HAVE_SYS_UNISTD_H
HAVE_SYS_UN_H
HAVE_SYS_VFS_H
HAVE_SYS_WAIT_H
HAVE_SYS_XATTR_H

Headers:
HAVE_ACL_LIBACL_H
HAVE_AIO_H
HAVE_ALLOCA_H
HAVE_ARPA_INET_H
HAVE_ASM_UNISTD_H
HAVE_ATTR_XATTR_H
HAVE_CTYPE_H
HAVE_DIRENT_H
HAVE_DLFCN_H
HAVE_EXECINFO_H
HAVE_FAM_H
HAVE_FCNTL_H
HAVE_FLOAT_H
HAVE_FNMATCH_H
HAVE_GLOB_H
HAVE_GRP_H
HAVE_LANGINFO_H
HAVE_LASTLOG_H
HAVE_LBER_H
HAVE_LDAP_H
HAVE_LIMITS_H
HAVE_LINUX_INOTIFY_H
HAVE_LOCALE_H
HAVE_MEMORY_H
HAVE_NETDB_H
HAVE_NETINET_IN_H
HAVE_NETINET_IN_SYSTM_H
HAVE_NETINET_IP_H
HAVE_NETINET_TCP_H
HAVE_NET_IF_H
HAVE_NSS_H
HAVE_PWD_H
HAVE_READLINE_HISTORY_H
HAVE_READLINE_READLINE_H
HAVE_RPCSVC_NIS_H
HAVE_RPCSVC_YPCLNT_H
HAVE_RPCSVC_YP_PROT_H
HAVE_RPC_RPC_H
HAVE_SECURITY_PAM_APPL_H
HAVE_SECURITY_PAM_EXT_H
HAVE_SECURITY_PAM_MODULES_H
HAVE_SECURITY__PAM_MACROS_H
HAVE_SETJMP_H
HAVE_SHADOW_H
HAVE_STDARG_H
HAVE_STDBOOL_H
HAVE_STDINT_H
HAVE_STDIO_H
HAVE_STDLIB_H
HAVE_STRINGS_H
HAVE_STRING_H
HAVE_STROPTS_H
HAVE_SYSCALL_H
HAVE_SYSLOG_H
HAVE_TERMIOS_H
HAVE_TERMIO_H
HAVE_TIME_H
HAVE_UNISTD_H
HAVE_UTIME_H

UTMP Options:
HAVE_GETUTMPX
HAVE_UTMPX_H
HAVE_UTMP_H
HAVE_UT_UT_ADDR
HAVE_UT_UT_EXIT
HAVE_UT_UT_HOST
HAVE_UT_UT_ID
HAVE_UT_UT_NAME
HAVE_UT_UT_PID
HAVE_UT_UT_TIME
HAVE_UT_UT_TYPE
HAVE_UT_UT_USER
PUTUTLINE_RETURNS_UTMP
WITH_UTMP

HAVE_* Defines:
HAVE_ASPRINTF
HAVE_ASPRINTF_DECL
HAVE_ATEXIT
HAVE_BACKTRACE_SYMBOLS
HAVE_BER_SCANF
HAVE_BOOL
HAVE_BZERO
HAVE_C99_VSNPRINTF
HAVE_CHMOD
HAVE_CHOWN
HAVE_CHROOT
HAVE_COMPARISON_FN_T
HAVE_COMPILER_WILL_OPTIMIZE_OUT_FNS
HAVE_CONNECT
HAVE_CREAT64
HAVE_CRYPT
HAVE_CUPS
HAVE_DECL_ASPRINTF
HAVE_DECL_RL_EVENT_HOOK
HAVE_DECL_SNPRINTF
HAVE_DECL_VASPRINTF
HAVE_DECL_VSNPRINTF
HAVE_DEVICE_MAJOR_FN
HAVE_DEVICE_MINOR_FN
HAVE_DIRENT_D_OFF
HAVE_DLCLOSE
HAVE_DLERROR
HAVE_DLOPEN
HAVE_DLSYM
HAVE_DUP2
HAVE_ENDNETGRENT
HAVE_ERRNO_DECL
HAVE_EXECL
HAVE_EXPLICIT_LARGEFILE_SUPPORT
HAVE_FAM_H_FAMCODES_TYPEDEF
HAVE_FCHMOD
HAVE_FCHOWN
HAVE_FCNTL_LOCK
HAVE_FCVT
HAVE_FGETXATTR
HAVE_FLISTXATTR
HAVE_FOPEN64
HAVE_FREMOVEXATTR
HAVE_FSEEKO64
HAVE_FSETXATTR
HAVE_FSID_INT
HAVE_FSTAT
HAVE_FSTAT64
HAVE_FSYNC
HAVE_FTELLO64
HAVE_FTRUNCATE
HAVE_FTRUNCATE64
HAVE_FTRUNCATE_EXTEND
HAVE_FUNCTION_MACRO
HAVE_GETCWD
HAVE_GETDIRENTRIES
HAVE_GETGRENT
HAVE_GETGRNAM
HAVE_GETGROUPLIST
HAVE_GETNETGRENT
HAVE_GETPAGESIZE
HAVE_GETPGRP
HAVE_GETPWENT_R
HAVE_GETRLIMIT
HAVE_GETSPNAM
HAVE_GETTIMEOFDAY_TZ
HAVE_GETXATTR
HAVE_GLOB
HAVE_GRANTPT
HAVE_HISTORY_LIST
HAVE_ICONV
HAVE_IFACE_IFCONF
HAVE_IMMEDIATE_STRUCTURES
HAVE_INITGROUPS
HAVE_INNETGR
HAVE_INOTIFY
HAVE_INOTIFY_INIT
HAVE_IPRINT
HAVE_KERNEL_CHANGE_NOTIFY
HAVE_KERNEL_OPLOCKS_LINUX
HAVE_KERNEL_SHARE_MODES
HAVE_LBER_LOG_PRINT_FN
HAVE_LDAP
HAVE_LDAP_ADD_RESULT_ENTRY
HAVE_LDAP_INIT
HAVE_LDAP_INITIALIZE
HAVE_LDAP_SET_REBIND_PROC
HAVE_LGETXATTR
HAVE_LIBLBER
HAVE_LIBLDAP
HAVE_LIBPAM
HAVE_LIBREADLINE
HAVE_LIBRESOLV
HAVE_LINK
HAVE_LINUX_READAHEAD
HAVE_LISTXATTR
HAVE_LLISTXATTR
HAVE_LLSEEK
HAVE_LONGLONG
HAVE_LONG_LONG
HAVE_LREMOVEXATTR
HAVE_LSEEK64
HAVE_LSETXATTR
HAVE_LSTAT
HAVE_LSTAT64
HAVE_MAKEDEV
HAVE_MEMALIGN
HAVE_MEMCPY
HAVE_MEMMOVE
HAVE_MEMSET
HAVE_MKDIR_MODE
HAVE_MKDTEMP
HAVE_MKNOD
HAVE_MKTIME
HAVE_MLOCK
HAVE_MLOCKALL
HAVE_MMAP
HAVE_MUNLOCK
HAVE_MUNLOCKALL
HAVE_NANOSLEEP
HAVE_NATIVE_ICONV
HAVE_NEW_LIBREADLINE
HAVE_NL_LANGINFO
HAVE_NO_AIO
HAVE_OPEN64
HAVE_PAM_GET_DATA
HAVE_PAM_VSYSLOG
HAVE_PATHCONF
HAVE_PEERCRED
HAVE_PIPE
HAVE_POLL
HAVE_POSIX_ACLS
HAVE_POSIX_FADVISE
HAVE_POSIX_MEMALIGN
HAVE_PRCTL
HAVE_PREAD
HAVE_PREAD64
HAVE_PRINTF
HAVE_PUTUTLINE
HAVE_PUTUTXLINE
HAVE_PWRITE
HAVE_PWRITE64
HAVE_RAND
HAVE_RANDOM
HAVE_READDIR64
HAVE_READLINK
HAVE_REALPATH
HAVE_REMOVEXATTR
HAVE_RENAME
HAVE_SECURE_MKSTEMP
HAVE_SELECT
HAVE_SENDFILE64
HAVE_SETBUFFER
HAVE_SETEGID
HAVE_SETENV
HAVE_SETENV_DECL
HAVE_SETEUID
HAVE_SETGROUPS
HAVE_SETLINEBUF
HAVE_SETLOCALE
HAVE_SETNETGRENT
HAVE_SETPGID
HAVE_SETRESGID
HAVE_SETRESGID_DECL
HAVE_SETRESUID
HAVE_SETRESUID_DECL
HAVE_SETSID
HAVE_SETXATTR
HAVE_SHMGET
HAVE_SIGACTION
HAVE_SIGBLOCK
HAVE_SIGPROCMASK
HAVE_SIGSET
HAVE_SIG_ATOMIC_T_TYPE
HAVE_SNPRINTF
HAVE_SNPRINTF_DECL
HAVE_SOCKETPAIR
HAVE_SOCKLEN_T_TYPE
HAVE_SRAND
HAVE_SRANDOM
HAVE_STAT64
HAVE_STAT_HIRES_TIMESTAMPS
HAVE_STAT_ST_ATIM
HAVE_STAT_ST_BLKSIZE
HAVE_STAT_ST_BLOCKS
HAVE_STAT_ST_CTIM
HAVE_STAT_ST_MTIM
HAVE_STRCASECMP
HAVE_STRCASESTR
HAVE_STRCHR
HAVE_STRDUP
HAVE_STRERROR
HAVE_STRFTIME
HAVE_STRNDUP
HAVE_STRNLEN
HAVE_STRPBRK
HAVE_STRSIGNAL
HAVE_STRTOK_R
HAVE_STRTOL
HAVE_STRTOLL
HAVE_STRTOQ
HAVE_STRTOUL
HAVE_STRTOULL
HAVE_STRTOUQ
HAVE_STRUCT_DIRENT64
HAVE_STRUCT_FLOCK64
HAVE_STRUCT_STAT_ST_RDEV
HAVE_STRUCT_TIMESPEC
HAVE_ST_RDEV
HAVE_SYMLINK
HAVE_SYSCONF
HAVE_SYSLOG
HAVE_TIMEGM
HAVE_UNIXSOCKET
HAVE_UNSETENV
HAVE_UPDWTMP
HAVE_UPDWTMPX
HAVE_USLEEP
HAVE_UTIMBUF
HAVE_UTIME
HAVE_UTIMES
HAVE_VASPRINTF
HAVE_VASPRINTF_DECL
HAVE_VA_COPY
HAVE_VOLATILE
HAVE_VSNPRINTF
HAVE_VSNPRINTF_DECL
HAVE_VSYSLOG
HAVE_WAITPID
HAVE_WORKING_AF_LOCAL
HAVE_YP_GET_DEFAULT_DOMAIN
HAVE__Bool
HAVE__VA_ARGS__MACRO
HAVE___CLOSE
HAVE___DUP2
HAVE___FCNTL
HAVE___FORK
HAVE___FSTAT
HAVE___FXSTAT
HAVE___LSEEK
HAVE___LSTAT
HAVE___LXSTAT
HAVE___NR_INOTIFY_INIT_DECL
HAVE___OPEN
HAVE___OPEN64
HAVE___PREAD64
HAVE___PWRITE64
HAVE___READ
HAVE___STAT
HAVE___WRITE
HAVE___XSTAT

--with Options:
WITH_AUTOMOUNT
WITH_PAM
WITH_PAM_MODULES
WITH_SENDFILE
WITH_SMBMOUNT
WITH_UTMP

Build Options:
COMPILER_SUPPORTS_LL
CONFIG_H_IS_FROM_SAMBA
DEFAULT_DISPLAY_CHARSET
DEFAULT_DOS_CHARSET
DEFAULT_UNIX_CHARSET
LDAP_SET_REBIND_PROC_ARGS
LINUX
LINUX_SENDFILE_API
PACKAGE_BUGREPORT
PACKAGE_NAME
PACKAGE_STRING
PACKAGE_TARNAME
PACKAGE_VERSION
REALPATH_TAKES_NULL
RETSIGTYPE
SEEKDIR_RETURNS_VOID
SHLIBEXT
SIZEOF_CHAR
SIZEOF_DEV_T
SIZEOF_INO_T
SIZEOF_INT
SIZEOF_LONG_LONG
SIZEOF_OFF_T
SIZEOF_SHORT
SIZEOF_SIZE_T
SIZEOF_SSIZE_T
SIZEOF_TIME_T
SOCKET_WRAPPER
STAT_STATVFS64
STAT_ST_BLOCKSIZE
STDC_HEADERS
STRING_STATIC_MODULES
SYSCONF_SC_NGROUPS_MAX
SYSCONF_SC_NPROCESSORS_ONLN
SYSCONF_SC_PAGESIZE
TIME_WITH_SYS_TIME
USE_SETRESUID
WITH_AUTOMOUNT
WITH_PAM
WITH_PAM_MODULES
WITH_SENDFILE
WITH_SMBMOUNT
_FILE_OFFSET_BITS
_GNU_SOURCE
_LARGEFILE64_SOURCE
_POSIX_C_SOURCE
_POSIX_SOURCE
_XOPEN_SOURCE_EXTENDED
auth_script_init
charset_CP437_init
charset_CP850_init
offset_t
static_decl_auth
static_decl_charset
static_decl_idmap
static_decl_nss_info
static_decl_pdb
static_decl_rpc
static_decl_vfs
static_init_auth
static_init_charset
static_init_idmap
static_init_nss_info
static_init_pdb
static_init_rpc
static_init_vfs
uint_t
vfs_audit_init
vfs_cap_init
vfs_default_quota_init
vfs_expand_msdfs_init
vfs_extd_audit_init
vfs_fake_perms_init
vfs_full_audit_init
vfs_netatalk_init
vfs_notify_fam_init
vfs_readahead_init
vfs_readonly_init
vfs_recycle_init
vfs_shadow_copy_init

Type sizes:
sizeof(char): 1
sizeof(int): 4
sizeof(long): 8
sizeof(long long): 8
sizeof(uint8): 1
sizeof(uint16): 2
sizeof(uint32): 4
sizeof(short): 2
sizeof(void*): 8
sizeof(size_t): 8
sizeof(off_t): 8
sizeof(ino_t): 8
sizeof(dev_t): 8

Builtin modules:
pdb_ldap pdb_smbpasswd pdb_tdbsam rpc_lsa rpc_reg rpc_lsa_ds rpc_wkssvc rpc_svcctl rpc_ntsvcs rpc_net rpc_netdfs rpc_srv rpc_spoolss rpc_eventlog rpc_samr rpc_echo idmap_ldap idmap_tdb idmap_passdb idmap_nss nss_info_template auth_sam auth_unix auth_winbind auth_server auth_domain auth_builtin vfs_default vfs_posixacl

I know is very long, but if there is anything you need to see, please let me know.

Thanks for your time and attention,

Harlan...

[pappy_mcfae]

Whoa!

That entire mess is your smb.conf? How completely too long and unnecessary so. You need barely one tenth of all that!

Samba likes the KISS (keep it simple, stupid) principle, and static IP addresses. Below is the smb.conf for this machine. All of my shares mount properly using a script I whipped up. I have both Windoze and Gentoo shares on this network, and they all work, in both directions.

Here is my smb.conf for your perusal:

[harlanb]

Hi Pappy,
That's exactly what I was looking for!!! I had to make some minor changes for this particular environment, but not too much.

Thank You!!!

Harlan...

[pappy_mcfae]

You are most welcome. Glad I could help.

Blessed be!
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.