| View previous topic :: View next topic |
| Author |
Message |
PatomaS
Tux's lil' helper
Joined: 09 Feb 2006
Posts: 128
|
 Posted: Mon Mar 02, 2009 6:28 am Post subject: Random lockups in X |
 |
|
Hi
I have a problem with my X sessions, doesn't matter if I use fluxbox or kde, at some point, X just lock's up the computer. So I'd appreciate if anyone has an idea how to get a stable system again.
The system is not reachable from other computers neither with ping or ssh.
If I'm in the console, the system keeps working with no problem, the freezing only occurs in X.
The hardware is the same, this is just a fresh install, the cd is the same I have used many times in this and other computers, a 2008.0 Gentoo minimal cd.
I have tried different things and so far none of them have worked, right now, this is my configuration:
System: amd64
xorg-server-1.5.3-r2
fluxbox-1.1.1
hal-0.5.11-r8
xf86-input-evdev-2.1.2
acpid-1.0.6
xf86-video-radeonhd-1.2.4
xf86-video-ati-6.11.0
I used the v3 list of packages to install xorg 1.5.
lspci:
| Quote: |
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series]
01:00.1 Display controller: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary)
04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
05:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
05:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
05:05.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
|
lsusb:
| Quote: |
Bus 001 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
|
emerge --info:
| Quote: |
Portage 2.2_rc23 (default/linux/amd64/2008.0, gcc-4.1.2, glibc-2.8_p20080602-r1, 2.6.27-gentoo-r8 x86_64)
=================================================================
System uname: Linux-2.6.27-gentoo-r8-x86_64-Intel-R-_Core-TM-2_CPU_6600_@_2.40GHz-with-glibc2.2.5
Timestamp of tree: Fri, 27 Feb 2009 01:45:01 +0000
ccache version 2.4 [enabled]
app-shells/bash: 3.2_p39
dev-java/java-config: 2.1.6-r1
dev-lang/python: 2.5.2-r7
dev-util/ccache: 2.4-r7
dev-util/cmake: 2.4.8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.63
sys-devel/automake: 1.4_p6, 1.5, 1.7.9-r1, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.26
virtual/os-headers: 2.6.27-r2
ABI="amd64"
ACCEPT_KEYWORDS="amd64"
ALSA_CARDS="hda-intel emu10k1"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol"
APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
ARCH="amd64"
ASFLAGS_x86="--32"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CCACHE_DIR="/tmp/ccache"
CCACHE_SIZE="2G"
CDEFINE_amd64="__x86_64__"
CDEFINE_x86="__i386__"
CFLAGS="-march=nocona -O2 -pipe"
CFLAGS_x86="-m32"
CHOST="x86_64-pc-linux-gnu"
CHOST_amd64="x86_64-pc-linux-gnu"
CHOST_x86="i686-pc-linux-gnu"
CLEAN_DELAY="5"
COLLISION_IGNORE="/lib/modules"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CVS_RSH="ssh"
CXXFLAGS="-O2 -pipe"
DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-jv5UZAYzGy,guid=07afb7e0760a6fff44cefe8549aa80cc"
DEFAULT_ABI="amd64"
DISPLAY=":0.0"
DISTDIR="/usr/portage/distfiles"
EDITOR="/bin/nano"
ELIBC="glibc"
EMERGE_DEFAULT_OPTS="--verbose"
EMERGE_WARNING_DELAY="10"
FEATURES="ccache distlocks fixpackages nodoc noinfo parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-orphans unmerge-orphanse userfetch"
FETCHCOMMAND="/usr/bin/wget -t 5 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
GCC_SPECS=""
GDK_USE_XFT="1"
GENTOO_MIRRORS="http://gentoo.gg3.net/ ftp://ftp.free.fr/mirrors/ftp.gentoo.org/ http://ftp.first-world.info/ http://ftp.rhnet.is/pub/gentoo/ http://gentoo.tiscali.nl/ http://mirror.gentoo.no/ http://mirror.mdfnet.se/mirror/gentoo http://ftp.udc.es/gentoo/ ftp://ftp.swin.edu.au/gentoo http://ftp.swin.edu.au/gentoo http://gentoo.gg3.net/ ftp://ftp.ecc.u-tokyo.ac.jp/GENTOO "
HOME="/root"
HUSHLOGIN="FALSE"
HZ="100"
INFOPATH="/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/info"
INPUT_DEVICES="evdev keyboard mouse"
JAVAC="/etc/java-config-2/current-system-vm/bin/javac"
JAVA_HOME="/etc/java-config-2/current-system-vm"
JDK_HOME="/etc/java-config-2/current-system-vm"
KDEDIRS="/usr:/usr/local:/usr/kde/3.5"
KERNEL="linux"
LANG="es_ES.utf8@euro"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LDFLAGS="-Wl,-O1"
LDFLAGS_x86="-m elf_i386"
LESS="-R -M --shift 5"
LESSOPEN="|lesspipe.sh %s"
LIBDIR_amd64="lib64"
LIBDIR_ppc="lib32"
LIBDIR_ppc64="lib64"
LIBDIR_sparc32="lib32"
LIBDIR_sparc64="lib64"
LIBDIR_x86="lib32"
LINGUAS="en es"
LOGNAME="root"
LS_COLORS="no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.svgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.pdf=00;32:*.ps=00;32:*.txt=00;32:*.patch=00;32:*.diff=00;32:*.log=00;32:*.tex=00;32:*.doc=00;32:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:"
MAKEOPTS="-j5"
MANPATH="/etc/java-config-2/current-system-vm/man:/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.18/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.1.2/man:/etc/java-config/system-vm/man/:/usr/lib64/php5/man/:/usr/kde/3.5/share/man:/usr/qt/3/doc/man"
MULTILIB_ABIS="amd64 x86"
MULTILIB_STRICT_DENY="64-bit.*shared object"
MULTILIB_STRICT_DIRS="/lib32 /lib /usr/lib32 /usr/lib /usr/kde/*/lib32 /usr/kde/*/lib /usr/qt/*/lib32 /usr/qt/*/lib /usr/X11R6/lib32 /usr/X11R6/lib"
MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|binutils|eclipse-3|debug|portage)"
NETBEANS="apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml"
NOCOLOR="true"
OPENGL_PROFILE="xorg-x11"
PAGER="/usr/bin/less"
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/kde/3.5/sbin:/usr/kde/3.5/bin:/usr/qt/3/bin"
PKGDIR="/usr/portage/packages"
PKG_CONFIG_PATH="/usr/qt/3/lib64/pkgconfig"
PORTAGE_ARCHLIST="ppc s390 amd64 x86 ppc64 x86-fbsd m68k arm sparc sh mips ia64 alpha hppa sparc-fbsd"
PORTAGE_BINHOST_CHUNKSIZE="3000"
PORTAGE_BIN_PATH="/usr/lib64/portage/bin"
PORTAGE_COMPRESS_EXCLUDE_SUFFIXES="css gif htm[l]? jp[e]?g js pdf png"
PORTAGE_CONFIGROOT="/"
PORTAGE_COUNTER_HASH="b9d09ddcf545213465902a3888301000"
PORTAGE_DEBUG="0"
PORTAGE_DEPCACHEDIR="/var/cache/edb/dep"
PORTAGE_ELOG_CLASSES="warn error log info"
PORTAGE_ELOG_MAILFROM="portage@localhost"
PORTAGE_ELOG_MAILSUBJECT="[portage] ebuild log for ${PACKAGE} on ${HOST}"
PORTAGE_ELOG_MAILURI="root"
PORTAGE_ELOG_SYSTEM="save"
PORTAGE_FETCH_CHECKSUM_TRY_MIRRORS="5"
PORTAGE_FETCH_RESUME_MIN_SIZE="350K"
PORTAGE_GID="250"
PORTAGE_INST_GID="0"
PORTAGE_INST_UID="0"
PORTAGE_PYM_PATH="/usr/lib64/portage/pym"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_RSYNC_RETRIES="3"
PORTAGE_TMPDIR="/tmp"
PORTAGE_VERBOSE="1"
PORTAGE_WORKDIR_MODE="0700"
PORTDIR="/usr/portage"
PORT_LOGDIR="/var/log/portage"
PROFILE_ONLY_VARIABLES="ARCH ELIBC KERNEL USERLAND"
PWD="/root"
QMAKESPEC="linux-g++"
QTDIR="/usr/qt/3"
RESUMECOMMAND="/usr/bin/wget -c -t 5 -T 60 --passive-ftp -O "${DISTDIR}/${FILE}" "${URI}""
ROOT="/"
ROOTPATH="/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/kde/3.5/sbin:/usr/kde/3.5/bin:/usr/qt/3/bin"
RPMDIR="/usr/portage/rpm"
SHELL="/bin/bash"
SHLVL="4"
STAGE1_USE="multilib nptl nptlonly unicode"
SYMLINK_LIB="yes"
SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"
TERM="xterm"
USE="X acl alsa amd64 apm bzip2 cli cracklib crypt dbus dri fortran gdbm hal iconv isdnlog kde midi mmx mudflap multilib ncurses nls nptl nptlonly opengl openmp pcre perl pppd python qt4 readline reflection sdl session smp spl sse sse2 ssl sysfs tcpd truetype unicode xorg zlib" ALSA_CARDS="hda-intel emu10k1" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="evdev keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en es" USERLAND="GNU" VIDEO_CARDS="radeon radeonhd"
USER="root"
USERLAND="GNU"
USE_EXPAND="ALSA_CARDS ALSA_PCM_PLUGINS APACHE2_MODULES APACHE2_MPMS CAMERAS CROSSCOMPILE_OPTS DVB_CARDS ELIBC FCDSL_CARDS FOO2ZJS_DEVICES FRITZCAPI_CARDS INPUT_DEVICES KERNEL LCD_DEVICES LINGUAS LIRC_DEVICES MISDN_CARDS NETBEANS_MODULES USERLAND VIDEO_CARDS"
USE_EXPAND_HIDDEN="CROSSCOMPILE_OPTS ELIBC KERNEL USERLAND"
USE_ORDER="env:pkg:conf:defaults:pkginternal:env.d"
VIDEO_CARDS="radeon radeonhd"
WINDOWID="14680099"
WINDOWPATH="7"
XAUTHORITY="/root/.Xauthority"
XDG_DATA_DIRS="/usr/share:/usr/kde/3.5/share:/usr/local/share"
XDG_SESSION_COOKIE=""
XTERM_LOCALE="C"
XTERM_SHELL="/bin/bash"
XTERM_VERSION="XTerm(241)"
_="/usr/bin/emerge"
|
[... in the next 2 parts due to extension limits in the message ...]
_________________
¡ hey, hou, hou, hey !
Last edited by PatomaS on Mon Mar 02, 2009 6:34 am; edited 2 times in total |
|
| Back to top |
|
 |
PatomaS
Tux's lil' helper
Joined: 09 Feb 2006
Posts: 128
|
| Posted: Mon Mar 02, 2009 6:30 am Post subject: |
|
|
Part 2:
dmesg:
| Quote: |
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-gentoo-r8 (root@patitohost) (gcc version 4.1.2 (Gentoo 4.1.2 p1.3)) #10 SMP PREEMPT Sun Mar 1 16:13:12 MYT 2009
[ 0.000000] Command line: root=/dev/sda2
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ed7e000 (usable)
[ 0.000000] BIOS-e820: 000000007ed7e000 - 000000007ee38000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ee38000 - 000000007fea1000 (usable)
[ 0.000000] BIOS-e820: 000000007fea1000 - 000000007fee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee9000 - 000000007feed000 (usable)
[ 0.000000] BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ff00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff00000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff00000 @ 8000-c000
[ 0.000000] last_map_addr: 7ff00000 end: 7ff00000
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT 7FEFDE48, 0054 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: FACP 7FEFCF10, 0074 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: DSDT 7FEF8010, 3F75 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: FACS 7FEDEC40, 0040
[ 0.000000] ACPI: APIC 7FEFCE10, 0078 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: WDDT 7FEF7F90, 0040 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: MCFG 7FEF7F10, 003C (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: ASF! 7FEFCD10, 00A6 (r32 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: HPET 7FEF7E90, 0038 (r1 INTEL D975XBX 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEFDC10, 01BC (r1 INTEL CpuPm 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEFDA10, 0175 (r1 INTEL Cpu0Ist 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEFD810, 0175 (r1 INTEL Cpu1Ist 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEFD610, 0175 (r1 INTEL Cpu2Ist 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEFD410, 0175 (r1 INTEL Cpu3Ist 5C7 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEF7E10, 002F (r1 INTEL SetupVar 5C7 MSFT 1000013)
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007ff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000159ec8c] TEXT DATA BSS ==> [0001000000 - 000159ec8c]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001800000-ffff8800033fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ed7e
[ 0.000000] 0: 0x0007ee38 -> 0x0007fea1
[ 0.000000] 0: 0x0007fee9 -> 0x0007feed
[ 0.000000] 0: 0x0007feff -> 0x0007ff00
[ 0.000000] On node 0 totalpages: 523659
[ 0.000000] DMA zone: 3842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 512551 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:80100000)
[ 0.000000] PERCPU: Allocating 45920 bytes of per cpu data
[ 0.000000] NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516393
[ 0.000000] Kernel command line: root=/dev/sda2
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2400.075 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000999] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000999] Memory: 2056164k/2096128k available (3040k kernel code, 37792k reserved, 1736k data, 332k init)
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.15 BogoMIPS (lpj=2400075)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.001008] CPU: Physical Processor ID: 0
[ 0.001101] CPU: Processor Core ID: 0
[ 0.001199] CPU0: Thermal monitoring enabled (TM2)
[ 0.001293] using mwait in idle threads.
[ 0.001394] Freeing SMP alternatives: 23k freed
[ 0.001504] ACPI: Core revision 20080609
[ 0.008365] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018786] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.018931] Using local APIC timer interrupts.
[ 0.019998] APIC timer calibration result 16667184
[ 0.019999] Detected 16.667 MHz APIC timer.
[ 0.020211] Booting processor 1/1 ip 6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 4800.16 BogoMIPS (lpj=2400083)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.091471] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.092121] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.093001] Brought up 2 CPUs
[ 0.093096] Total of 2 processors activated (9600.31 BogoMIPS).
[ 0.093250] khelper used greatest stack depth: 6128 bytes left
[ 0.094038] net_namespace: 1192 bytes
[ 0.094259] NET: Registered protocol family 16
[ 0.094368] No dock devices found.
[ 0.094368] ACPI: bus type pci registered
[ 0.094368] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.094987] PCI: Not using MMCONFIG.
[ 0.095080] PCI: Using configuration type 1 for base access
[ 0.097436] ACPI: EC: Look up EC in DSDT
[ 0.100287] ACPI: Interpreter enabled
[ 0.100386] ACPI: (supports S0 S5)
[ 0.100530] ACPI: Using IOAPIC for interrupt routing
[ 0.100657] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.102860] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.102957] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.104153] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.108141] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.108141] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.108153] pci 0000:00:01.0: PME# disabled
[ 0.108293] PCI: 0000:00:1b.0 reg 10 64bit mmio: [90300000, 90303fff]
[ 0.108337] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.108434] pci 0000:00:1b.0: PME# disabled
[ 0.108577] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.108986] pci 0000:00:1c.0: PME# disabled
[ 0.109132] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.109229] pci 0000:00:1c.4: PME# disabled
[ 0.109371] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.109468] pci 0000:00:1c.5: PME# disabled
[ 0.109590] PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
[ 0.109633] PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
[ 0.109675] PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
[ 0.109718] PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
[ 0.109764] PCI: 0000:00:1d.7 reg 10 32bit mmio: [90304400, 903047ff]
[ 0.109817] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.110012] pci 0000:00:1d.7: PME# disabled
[ 0.110232] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.110238] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.110243] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.110249] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.110254] PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
[ 0.110294] PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
[ 0.110299] PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
[ 0.110304] PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
[ 0.110309] PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
[ 0.110313] PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
[ 0.110318] PCI: 0000:00:1f.2 reg 24 32bit mmio: [90304000, 903043ff]
[ 0.110345] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.110441] pci 0000:00:1f.2: PME# disabled
[ 0.110569] PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f]
[ 0.110614] PCI: 0000:01:00.0 reg 10 64bit mmio: [80000000, 8fffffff]
[ 0.110621] PCI: 0000:01:00.0 reg 18 64bit mmio: [90200000, 9020ffff]
[ 0.110626] PCI: 0000:01:00.0 reg 20 io port: [3000, 30ff]
[ 0.110634] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
[ 0.110655] pci 0000:01:00.0: supports D1
[ 0.110656] pci 0000:01:00.0: supports D2
[ 0.110677] PCI: 0000:01:00.1 reg 10 64bit mmio: [90210000, 9021ffff]
[ 0.110710] pci 0000:01:00.1: supports D1
[ 0.110712] pci 0000:01:00.1: supports D2
[ 0.110744] PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
[ 0.110746] PCI: bridge 0000:00:01.0 32bit mmio: [90200000, 902fffff]
[ 0.110750] PCI: bridge 0000:00:01.0 64bit mmio pref: [80000000, 8fffffff]
[ 0.110785] PCI: bridge 0000:00:1c.0 32bit mmio: [90400000, 904fffff]
[ 0.110824] PCI: bridge 0000:00:1c.4 32bit mmio: [90500000, 905fffff]
[ 0.110888] PCI: 0000:04:00.0 reg 10 32bit mmio: [90100000, 9011ffff]
[ 0.110907] PCI: 0000:04:00.0 reg 18 io port: [2000, 201f]
[ 0.111037] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.111137] pci 0000:04:00.0: PME# disabled
[ 0.111258] PCI: bridge 0000:00:1c.5 io port: [2000, 2fff]
[ 0.111261] PCI: bridge 0000:00:1c.5 32bit mmio: [90100000, 901fffff]
[ 0.111294] PCI: 0000:05:00.0 reg 10 io port: [1000, 101f]
[ 0.111340] pci 0000:05:00.0: supports D1
[ 0.111342] pci 0000:05:00.0: supports D2
[ 0.111365] PCI: 0000:05:00.1 reg 10 io port: [1040, 1047]
[ 0.111412] pci 0000:05:00.1: supports D1
[ 0.111413] pci 0000:05:00.1: supports D2
[ 0.111449] PCI: 0000:05:04.0 reg 10 32bit mmio: [90004000, 900047ff]
[ 0.111455] PCI: 0000:05:04.0 reg 14 32bit mmio: [90000000, 90003fff]
[ 0.111500] pci 0000:05:04.0: supports D1
[ 0.111501] pci 0000:05:04.0: supports D2
[ 0.111502] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.111599] pci 0000:05:04.0: PME# disabled
[ 0.111716] PCI: 0000:05:05.0 reg 10 io port: [1038, 103f]
[ 0.111722] PCI: 0000:05:05.0 reg 14 io port: [104c, 104f]
[ 0.111728] PCI: 0000:05:05.0 reg 18 io port: [1030, 1037]
[ 0.111733] PCI: 0000:05:05.0 reg 1c io port: [1048, 104b]
[ 0.111739] PCI: 0000:05:05.0 reg 20 io port: [1020, 102f]
[ 0.111745] PCI: 0000:05:05.0 reg 24 32bit mmio: [90004800, 90004bff]
[ 0.111751] PCI: 0000:05:05.0 reg 30 32bit mmio: [fff80000, ffffffff]
[ 0.111772] pci 0000:05:05.0: supports D1
[ 0.111774] pci 0000:05:05.0: supports D2
[ 0.111804] pci 0000:00:1e.0: transparent bridge
[ 0.111900] PCI: bridge 0000:00:1e.0 io port: [1000, 1fff]
[ 0.111903] PCI: bridge 0000:00:1e.0 32bit mmio: [90000000, 900fffff]
[ 0.111925] bus 00 -> node 0
[ 0.111929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.112366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.112577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.112697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.112814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.116097] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.117080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.117505] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.117931] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.118379] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.118916] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.119354] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.119777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.120174] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.120179] pnp: PnP ACPI init
[ 0.120179] ACPI: bus type pnp registered
[ 0.120187] pnp 00:00: parse allocated resources
[ 0.121622] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.121652] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.121652] pnp 00:01: parse allocated resources
[ 0.121652] pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xfed45000-0xfed99fff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xc0000-0xdffff flags 0x0
[ 0.121652] pnp 00:01: add mem 0xe0000-0xfffff flags 0x0
[ 0.121652] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x188
[ 0.121652] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122004] pnp 00:02: parse allocated resources
[ 0.122010] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.122011] pnp 00:02: add io 0x81-0x83 flags 0x1
[ 0.122013] pnp 00:02: add io 0x87-0x87 flags 0x1
[ 0.122015] pnp 00:02: add io 0x89-0x8b flags 0x1
[ 0.122017] pnp 00:02: add io 0x8f-0x8f flags 0x1
[ 0.122018] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.122020] pnp 00:02: add dma 4 flags 0x0
[ 0.122045] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.122045] pnp 00:03: parse allocated resources
[ 0.122045] pnp 00:03: add io 0x70-0x71 flags 0x1
[ 0.122045] pnp 00:03: add io 0x74-0x77 flags 0x1
[ 0.122045] pnp 00:03: add irq 8 flags 0x1
[ 0.122045] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.122045] pnp 00:04: parse allocated resources
[ 0.122045] pnp 00:04: add io 0xf0-0xf0 flags 0x1
[ 0.122045] pnp 00:04: add irq 13 flags 0x1
[ 0.122045] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.122045] pnp 00:05: parse allocated resources
[ 0.122045] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.122045] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.122045] pnp 00:06: parse allocated resources
[ 0.122045] pnp 00:06: add io 0x500-0x53f flags 0x1
[ 0.122045] pnp 00:06: add io 0x400-0x47f flags 0x1
[ 0.122045] pnp 00:06: add io 0x92-0x92 flags 0x1
[ 0.122045] pnp 00:06: add io 0x680-0x6ff flags 0x1
[ 0.122045] pnp 00:06: add io 0x10-0x1f flags 0x1
[ 0.122045] pnp 00:06: add io 0x72-0x73 flags 0x1
[ 0.122045] pnp 00:06: add io 0x80-0x80 flags 0x1
[ 0.122045] pnp 00:06: add io 0x84-0x86 flags 0x1
[ 0.122045] pnp 00:06: add io 0x88-0x88 flags 0x1
[ 0.122045] pnp 00:06: add io 0x8c-0x8e flags 0x1
[ 0.122045] pnp 00:06: add io 0x90-0x9f flags 0x1
[ 0.122045] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x188
[ 0.122068] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122284] pnp 00:07: parse allocated resources
[ 0.122288] pnp 00:07: add io 0x60-0x60 flags 0x1
[ 0.122290] pnp 00:07: add io 0x64-0x64 flags 0x1
[ 0.122294] pnp 00:07: add irq 1 flags 0x1
[ 0.122322] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.122322] pnp 00:08: parse allocated resources
[ 0.122322] pnp 00:08: add mem 0xfec00000-0xfec000ff flags 0x0
[ 0.122322] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.122322] pnp: PnP ACPI: found 9 devices
[ 0.122983] ACPI: ACPI bus type pnp unregistered
[ 0.123095] SCSI subsystem initialized
[ 0.123095] libata version 3.00 loaded.
[ 0.123095] usbcore: registered new interface driver usbfs
[ 0.123111] usbcore: registered new interface driver hub
[ 0.124015] usbcore: registered new device driver usb
[ 0.124085] PCI: Using ACPI for IRQ routing
[ 0.134993] NetLabel: Initializing
[ 0.135091] NetLabel: domain hash size = 128
[ 0.135189] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.135305] NetLabel: unlabeled traffic allowed by default
[ 0.135418] PCI-GART: No AMD northbridge found.
[ 0.135515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.135705] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.137171] ACPI: RTC can wake from S4
[ 0.142107] pnp: the driver 'system' has been registered
[ 0.142119] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.142222] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.142325] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.142435] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.142531] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.142628] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.142724] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.142820] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.142917] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.143013] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.143113] system 00:01: driver attached
[ 0.143120] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.143216] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.143312] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.143407] system 00:06: driver attached
[ 0.148071] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.148171] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.148267] pci 0000:00:01.0: MEM window: 0x90200000-0x902fffff
[ 0.148364] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff
[ 0.148528] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.148623] pci 0000:00:1c.0: IO window: disabled
[ 0.148719] pci 0000:00:1c.0: MEM window: 0x90400000-0x904fffff
[ 0.148816] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.148914] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.149008] pci 0000:00:1c.4: IO window: disabled
[ 0.149108] pci 0000:00:1c.4: MEM window: 0x90500000-0x905fffff
[ 0.149205] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.149303] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.149398] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.149495] pci 0000:00:1c.5: MEM window: 0x90100000-0x901fffff
[ 0.149592] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.149690] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.149786] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.149883] pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff
[ 0.149980] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.150083] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.150184] pci 0000:00:01.0: setting latency timer to 64
[ 0.150191] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.150288] pci 0000:00:1c.0: setting latency timer to 64
[ 0.150294] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.150391] pci 0000:00:1c.4: setting latency timer to 64
[ 0.150397] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.150494] pci 0000:00:1c.5: setting latency timer to 64
[ 0.150499] pci 0000:00:1e.0: setting latency timer to 64
[ 0.150502] bus: 00 index 0 io port: [0, ffff]
[ 0.150596] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.150690] bus: 01 index 0 io port: [3000, 3fff]
[ 0.150784] bus: 01 index 1 mmio: [90200000, 902fffff]
[ 0.150879] bus: 01 index 2 mmio: [80000000, 8fffffff]
[ 0.150973] bus: 01 index 3 mmio: [0, 0]
[ 0.151066] bus: 02 index 0 mmio: [0, 0]
[ 0.151163] bus: 02 index 1 mmio: [90400000, 904fffff]
[ 0.151257] bus: 02 index 2 mmio: [0, 0]
[ 0.151350] bus: 02 index 3 mmio: [0, 0]
[ 0.151443] bus: 03 index 0 mmio: [0, 0]
[ 0.151536] bus: 03 index 1 mmio: [90500000, 905fffff]
[ 0.151630] bus: 03 index 2 mmio: [0, 0]
[ 0.151723] bus: 03 index 3 mmio: [0, 0]
[ 0.151816] bus: 04 index 0 io port: [2000, 2fff]
[ 0.151910] bus: 04 index 1 mmio: [90100000, 901fffff]
[ 0.152004] bus: 04 index 2 mmio: [0, 0]
[ 0.152098] bus: 04 index 3 mmio: [0, 0]
[ 0.152194] bus: 05 index 0 io port: [1000, 1fff]
[ 0.152288] bus: 05 index 1 mmio: [90000000, 900fffff]
[ 0.152382] bus: 05 index 2 mmio: [0, 0]
[ 0.152475] bus: 05 index 3 io port: [0, ffff]
[ 0.152569] bus: 05 index 4 mmio: [0, ffffffffffffffff]
[ 0.152669] NET: Registered protocol family 2
[ 0.162351] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.162741] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.164290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.164814] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.164910] TCP reno registered
[ 0.167457] NET: Registered protocol family 1
[ 0.168784] audit: initializing netlink socket (disabled)
[ 0.168895] type=2000 audit(1236002926.168:1): initialized
[ 0.169188] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.171403] VFS: Disk quotas dquot_6.5.1
[ 0.171565] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.172017] msgmni has been set to 4017
[ 0.172204] SELinux: Registering netfilter hooks
[ 0.172402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.172565] io scheduler noop registered
[ 0.172658] io scheduler anticipatory registered
[ 0.172752] io scheduler deadline registered
[ 0.172901] io scheduler cfq registered (default)
[ 0.173011] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.173013] pci 0000:00:1d.0: Performing full reset
[ 0.173027] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.173029] pci 0000:00:1d.1: Performing full reset
[ 0.173043] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.173044] pci 0000:00:1d.2: Performing full reset
[ 0.173058] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.173060] pci 0000:00:1d.3: Performing full reset
[ 0.173195] pci 0000:01:00.0: Boot video device
[ 0.173291] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.173316] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.173434] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.173471] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.173538] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.173565] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.173686] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.173720] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.173754] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.173831] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.173860] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.173981] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.174016] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.174049] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.174123] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.174150] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.174271] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.174305] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.174339] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.176985] Linux agpgart interface v0.103
[ 0.177352] processor ACPI0007:00: registered as cooling_device0
[ 0.177541] processor ACPI0007:01: registered as cooling_device1
[ 0.177781] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 0.177879] Copyright (c) 1999-2006 Intel Corporation.
[ 0.178020] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 0.178116] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.178254] e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.178357] e1000e 0000:04:00.0: setting latency timer to 64
[ 0.264502] 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:01:d3:94
[ 0.264667] 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.264830] 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 0.264965] Uniform Multi-Platform E-IDE driver
[ 0.265135] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
[ 0.265236] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.265338] piix 0000:00:1f.1: IDE port disabled
[ 0.265436] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.265535] ide0: BM-DMA at 0x40b0-0x40b7
[ 0.265634] Probing IDE interface ide0...
[ 0.507287] Switched to high resolution mode on CPU 1
[ 0.507814] Switched to high resolution mode on CPU 0
[ 0.527456] hda: ST3120022A, ATA DISK drive
[ 1.241208] hdb: PHILIPS DVDR824DP, ATAPI CD/DVD-ROM drive
[ 1.292106] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.292451] hda: UDMA/100 mode selected
[ 1.292818] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.293006] hdb: UDMA/33 mode selected
[ 1.293405] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.293537] isa bounce pool size: 16 pages
[ 1.298554] Driver 'sd' needs updating - please use bus_type methods
[ 1.298685] Driver 'sr' needs updating - please use bus_type methods
[ 1.298829] ahci 0000:00:1f.2: version 3.0
[ 1.298837] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.298991] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.299159] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 1.299256] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.299426] scsi0 : ahci
[ 1.299604] scsi1 : ahci
[ 1.299761] scsi2 : ahci
[ 1.299917] scsi3 : ahci
[ 1.300112] ata1: SATA max UDMA/133 abar m1024@0x90304000 port 0x90304100 irq 379
[ 1.300275] ata2: SATA max UDMA/133 abar m1024@0x90304000 port 0x90304180 irq 379
[ 1.300436] ata3: SATA max UDMA/133 abar m1024@0x90304000 port 0x90304200 irq 379
[ 1.300598] ata4: SATA max UDMA/133 abar m1024@0x90304000 port 0x90304280 irq 379
[ 1.605036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.606642] ata1.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.606743] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.608746] ata1.00: configured for UDMA/133
[ 2.331036] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.351562] ata2.00: ATA-7: SAMSUNG HD501LJ, CR100-06, max UDMA7
[ 2.351664] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.353727] ata2.00: configured for UDMA/133
[ 2.658034] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.963034] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.963224] scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 2.963522] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 2.963695] sd 0:0:0:0: [sda] Write Protect is off
[ 2.963790] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.963810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.964024] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 2.964196] sd 0:0:0:0: [sda] Write Protect is off
[ 2.964292] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.964312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.964476] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
[ 3.068452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.068675] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 3.068945] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 3.069056] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.069150] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.069171] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.069370] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 3.069476] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.069572] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.069593] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.069756] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 3.219599] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.219881] sata_sil 0000:05:05.0: version 2.3
[ 3.219902] sata_sil 0000:05:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.220015] sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix
[ 3.220227] scsi4 : sata_sil
[ 3.220385] scsi5 : sata_sil
[ 3.222387] scsi6 : sata_sil
[ 3.222544] scsi7 : sata_sil
[ 3.222683] ata5: SATA max UDMA/100 mmio m1024@0x90004800 tf 0x90004880 irq 17
[ 3.222846] ata6: SATA max UDMA/100 mmio m1024@0x90004800 tf 0x900048c0 irq 17
[ 3.223011] ata7: SATA max UDMA/100 mmio m1024@0x90004800 tf 0x90004a80 irq 17
[ 3.223173] ata8: SATA max UDMA/100 mmio m1024@0x90004800 tf 0x90004ac0 irq 17
[ 3.528040] ata5: SATA link down (SStatus 0 SControl 310)
[ 3.833039] ata6: SATA link down (SStatus 0 SControl 310)
[ 4.138039] ata7: SATA link down (SStatus 0 SControl 310)
[ 4.443039] ata8: SATA link down (SStatus 0 SControl 310)
[ 4.443458] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 4.443481] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.443582] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.443584] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.443730] drivers/usb/core/inode.c: creating file 'devices'
[ 4.443734] drivers/usb/core/inode.c: creating file '001'
[ 4.443785] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.443951] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 4.443954] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 4.443967] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.447842] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.447939] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.447941] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 4.447950] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90304400
[ 4.448051] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.451924] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.457031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.457236] usb usb1: default language 0x0409
[ 4.457288] usb usb1: uevent
[ 4.457324] usb usb1: usb_probe_device
[ 4.457326] usb usb1: configuration #1 chosen from 1 choice
[ 4.457424] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 4.457437] usb 1-0:1.0: uevent
[ 4.457472] hub 1-0:1.0: usb_probe_interface
[ 4.457473] hub 1-0:1.0: usb_probe_interface - got id
[ 4.457475] hub 1-0:1.0: USB hub found
[ 4.457572] hub 1-0:1.0: 8 ports detected
[ 4.457665] hub 1-0:1.0: standalone hub
[ 4.457666] hub 1-0:1.0: no power switching (usb 1.0)
[ 4.457667] hub 1-0:1.0: individual port over-current protection
[ 4.457669] hub 1-0:1.0: power on to power good time: 20ms
[ 4.457673] hub 1-0:1.0: local power source is good
[ 4.457675] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 4.558062] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
[ 4.558066] hub 1-0:1.0: port 4: status 0501 change 0001
[ 4.659039] hub 1-0:1.0: state 7 ports 8 chg 0010 evt 0000
[ 4.659148] drivers/usb/core/inode.c: creating file '001'
[ 4.659164] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 4.659172] ehci_hcd 0000:00:1d.7: port 4 low speed --> companion
[ 4.659228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.659348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.659509] usb usb1: Product: EHCI Host Controller
[ 4.659603] usb usb1: Manufacturer: Linux 2.6.27-gentoo-r8 ehci_hcd
[ 4.659698] usb usb1: SerialNumber: 0000:00:1d.7
[ 4.659835] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.659837] ohci_hcd: block sizes: ed 80 td 96
[ 4.659884] USB Universal Host Controller Interface driver v3.0
[ 4.659999] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.660102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.660104] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.660237] drivers/usb/core/inode.c: creating file '002'
[ 4.660286] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.660451] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.660547] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.660549] uhci_hcd 0000:00:1d.0: Performing full reset
[ 4.660561] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 4.660565] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 4.660683] usb usb2: default language 0x0409
[ 4.660713] usb usb2: uevent
[ 4.660744] usb usb2: usb_probe_device
[ 4.660746] usb usb2: configuration #1 chosen from 1 choice
[ 4.660843] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 4.660856] usb 2-0:1.0: uevent
[ 4.660885] hub 2-0:1.0: usb_probe_interface
[ 4.660886] hub 2-0:1.0: usb_probe_interface - got id
[ 4.660888] hub 2-0:1.0: USB hub found
[ 4.660984] hub 2-0:1.0: 2 ports detected
[ 4.661080] hub 2-0:1.0: standalone hub
[ 4.661082] hub 2-0:1.0: no power switching (usb 1.0)
[ 4.661083] hub 2-0:1.0: individual port over-current protection
[ 4.661085] hub 2-0:1.0: power on to power good time: 2ms
[ 4.661088] hub 2-0:1.0: local power source is good
[ 4.661090] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 4.710033] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC
[ 4.761088] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.761156] drivers/usb/core/inode.c: creating file '001'
[ 4.761232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.761344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.761505] usb usb2: Product: UHCI Host Controller
[ 4.761599] usb usb2: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd
[ 4.761694] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.761801] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.761900] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.761903] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.762039] drivers/usb/core/inode.c: creating file '003'
[ 4.762083] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.762248] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.762344] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.762346] uhci_hcd 0000:00:1d.1: Performing full reset
[ 4.762358] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 4.762367] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 4.762485] usb usb3: default language 0x0409
[ 4.762516] usb usb3: uevent
[ 4.762546] usb usb3: usb_probe_device
[ 4.762548] usb usb3: configuration #1 chosen from 1 choice
[ 4.762645] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4.762658] usb 3-0:1.0: uevent
[ 4.762687] hub 3-0:1.0: usb_probe_interface
[ 4.762688] hub 3-0:1.0: usb_probe_interface - got id
[ 4.762690] hub 3-0:1.0: USB hub found
[ 4.762786] hub 3-0:1.0: 2 ports detected
[ 4.762879] hub 3-0:1.0: standalone hub
[ 4.762880] hub 3-0:1.0: no power switching (usb 1.0)
[ 4.762882] hub 3-0:1.0: individual port over-current protection
[ 4.762883] hub 3-0:1.0: power on to power good time: 2ms
[ 4.762887] hub 3-0:1.0: local power source is good
[ 4.762888] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4.863060] uhci_hcd 0000:00:1d.1: port 2 portsc 01ab,00
[ 4.863064] hub 3-0:1.0: port 2: status 0301 change 0003
[ 4.964034] hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0000
[ 4.964102] drivers/usb/core/inode.c: creating file '001'
[ 4.964118] hub 3-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 4.964187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.964298] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.964459] usb usb3: Product: UHCI Host Controller
[ 4.964553] usb usb3: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd
[ 4.964649] usb usb3: SerialNumber: 0000:00:1d.1
[ 4.964756] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.964855] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.964857] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.964992] drivers/usb/core/inode.c: creating file '004'
[ 4.965044] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.965209] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.965305] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.965307] uhci_hcd 0000:00:1d.2: Performing full reset
[ 4.965319] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 4.965329] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 4.965450] usb usb4: default language 0x0409
[ 4.965480] usb usb4: uevent
[ 4.965511] usb usb4: usb_probe_device
[ 4.965512] usb usb4: configuration #1 chosen from 1 choice
[ 4.965609] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 4.965623] usb 4-0:1.0: uevent
[ 4.965653] hub 4-0:1.0: usb_probe_interface
[ 4.965655] hub 4-0:1.0: usb_probe_interface - got id
[ 4.965656] hub 4-0:1.0: USB hub found
[ 4.965753] hub 4-0:1.0: 2 ports detected
[ 4.965846] hub 4-0:1.0: standalone hub
[ 4.965847] hub 4-0:1.0: no power switching (usb 1.0)
[ 4.965848] hub 4-0:1.0: individual port over-current protection
[ 4.965850] hub 4-0:1.0: power on to power good time: 2ms
[ 4.965853] hub 4-0:1.0: local power source is good
[ 4.965855] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 5.066031] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 5.066184] drivers/usb/core/inode.c: creating file '001'
[ 5.066264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.066371] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.066533] usb usb4: Product: UHCI Host Controller
[ 5.066627] usb usb4: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd
[ 5.066722] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.066829] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.066928] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.066931] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.067070] drivers/usb/core/inode.c: creating file '005'
[ 5.067115] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.067279] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 5.067375] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 5.067377] uhci_hcd 0000:00:1d.3: Performing full reset
[ 5.067389] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[ 5.067398] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 5.067516] usb usb5: default language 0x0409
[ 5.067547] usb usb5: uevent
[ 5.067577] usb usb5: usb_probe_device
[ 5.067579] usb usb5: configuration #1 chosen from 1 choice
[ 5.067676] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 5.067690] usb 5-0:1.0: uevent
[ 5.067719] hub 5-0:1.0: usb_probe_interface
[ 5.067721] hub 5-0:1.0: usb_probe_interface - got id
[ 5.067722] hub 5-0:1.0: USB hub found
[ 5.067818] hub 5-0:1.0: 2 ports detected
[ 5.067911] hub 5-0:1.0: standalone hub
[ 5.067912] hub 5-0:1.0: no power switching (usb 1.0)
[ 5.067914] hub 5-0:1.0: individual port over-current protection
[ 5.067915] hub 5-0:1.0: power on to power good time: 2ms
[ 5.067919] hub 5-0:1.0: local power source is good
[ 5.067920] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 5.168112] drivers/usb/core/inode.c: creating file '001'
[ 5.168188] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.168299] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.168461] usb usb5: Product: UHCI Host Controller
[ 5.168555] usb usb5: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd
[ 5.168650] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.207508] usb 3-2: skipped 1 descriptor after interface
[ 5.212506] usb 3-2: default language 0x0409
[ 5.227543] usb 3-2: uevent
[ 5.227591] usb 3-2: usb_probe_device
[ 5.227594] usb 3-2: configuration #1 chosen from 1 choice
[ 5.230509] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 5.230531] usb 3-2:1.0: uevent
[ 5.230648] drivers/usb/core/inode.c: creating file '002'
[ 5.230727] usb 3-2: New USB device found, idVendor=046d, idProduct=c50e
[ 5.230838] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.230934] usb 3-2: Product: USB RECEIVER
[ 5.231031] usb 3-2: Manufacturer: Logitech
[ 5.231146] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.231148] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.231164] usbcore: registered new interface driver libusual
[ 5.231261] pnp: the driver 'i8042 kbd' has been registered
[ 5.231274] i8042 kbd 00:07: driver attached
[ 5.231304] pnp: the driver 'i8042 aux' has been registered
[ 5.231341] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.231436] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.232117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.232279] mice: PS/2 mouse device common for all mice
[ 5.232568] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.232766] cpuidle: using governor ladder
[ 5.232860] cpuidle: using governor menu
[ 5.232955] No iBFT detected.
[ 5.233120] usbcore: registered new interface driver hiddev
[ 5.233223] usbhid 3-2:1.0: usb_probe_interface
[ 5.233224] usbhid 3-2:1.0: usb_probe_interface - got id
[ 5.250912] input: Logitech USB RECEIVER as /class/input/input0
[ 5.255350] input: AT Translated Set 2 keyboard as /class/input/input1
[ 5.258139] input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-2
[ 5.258454] usbcore: registered new interface driver usbhid
[ 5.258550] usbhid: v2.6:USB HID core driver
[ 5.258684] Netfilter messages via NETLINK v0.30.
[ 5.258830] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.259056] ctnetlink v0.93: registering with nfnetlink.
[ 5.259795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.259908] TCP cubic registered
[ 5.260007] NET: Registered protocol family 17
[ 5.260322] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 5.388062] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.388164] EXT3-fs: write access will be enabled during recovery.
[ 5.459376] kjournald starting. Commit interval 5 seconds
[ 5.459383] EXT3-fs: recovery complete.
[ 5.463942] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.464058] VFS: Mounted root (ext3 filesystem) readonly.
[ 5.464184] Freeing unused kernel memory: 332k freed
[ 5.464363] Write protecting the kernel read-only data: 4504k
[ 5.808483] khelper used greatest stack depth: 5344 bytes left
[ 5.954034] usb usb2: suspend_rh (auto-stop)
[ 6.204040] usb usb4: suspend_rh (auto-stop)
[ 6.204061] usb usb5: suspend_rh (auto-stop)
[ 6.271764] stty used greatest stack depth: 4608 bytes left
[ 6.572623] usb usb2: uevent
[ 6.572641] usb 2-0:1.0: uevent
[ 6.572673] usb usb3: uevent
[ 6.572689] usb 3-0:1.0: uevent
[ 6.572706] usb 3-2: uevent
[ 6.572722] usb 3-2:1.0: uevent
[ 6.572751] usb usb4: uevent
[ 6.572768] usb 4-0:1.0: uevent
[ 6.572797] usb usb5: uevent
[ 6.572814] usb 5-0:1.0: uevent
[ 6.572845] usb usb1: uevent
[ 6.572861] usb 1-0:1.0: uevent
[ 6.762019] input: Power Button (FF) as /class/input/input2
[ 6.765802] i2c-core: driver [dummy] registered
[ 6.773332] ACPI: Power Button (FF) [PWRF]
[ 6.773381] input: Sleep Button (CM) as /class/input/input3
[ 6.775437] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.775459] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.787298] ACPI: Sleep Button (CM) [SLPB]
[ 6.788869] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.788877] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.788903] i2c-adapter i2c-0: adapter [SMBus I801 adapter at 4000] registered
[ 6.789189] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache
[ 6.789195] Uniform CD-ROM driver Revision: 3.20
[ 7.237689] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.237711] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.324627] EMU10K1_Audigy 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.920701] EXT3 FS on sda2, internal journal
[ 8.065085] i2c-core: driver [eeprom] registered
[ 8.065089] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50
[ 8.069032] i2c-adapter i2c-0: Creating eeprom at 0x50
[ 8.069053] i2c 0-0050: uevent
[ 8.069300] eeprom 0-0050: probe
[ 8.069304] i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0050
[ 8.069306] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51
[ 8.071027] i801_smbus 0000:00:1f.3: No response
[ 8.071035] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52
[ 8.075036] i2c-adapter i2c-0: Creating eeprom at 0x52
[ 8.075055] i2c 0-0052: uevent
[ 8.075066] eeprom 0-0052: probe
[ 8.075071] i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0052
[ 8.075074] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53
[ 8.077021] i801_smbus 0000:00:1f.3: No response
[ 8.077029] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54
[ 8.079030] i801_smbus 0000:00:1f.3: No response
[ 8.079037] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55
[ 8.081029] i801_smbus 0000:00:1f.3: No response
[ 8.081035] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56
[ 8.083031] i801_smbus 0000:00:1f.3: No response
[ 8.083038] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57
[ 8.085030] i801_smbus 0000:00:1f.3: No response
[ 8.095185] i2c /dev entries driver
[ 8.095630] i2c-core: driver [dev_driver] registered
[ 8.095896] i2c-dev: adapter [SMBus I801 adapter at 4000] registered as minor 0
[ 8.117495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.127353] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 8.142304] pnp: the driver 'rtc_cmos' has been registered
[ 8.142928] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 8.142952] rtc0: alarms up to one month, hpet irqs
[ 8.142954] rtc_cmos 00:03: driver attached
[ 8.154882] Initializing USB Mass Storage driver...
[ 8.155065] usbcore: registered new interface driver usb-storage
[ 8.155069] USB Mass Storage support registered.
[ 8.172087] coretemp coretemp.0: Using relative temperature scale!
[ 8.172126] coretemp coretemp.1: Using relative temperature scale!
[ 8.195604] [drm] Initialized drm 1.1.0 20060810
[ 11.618350] kjournald starting. Commit interval 5 seconds
[ 11.618797] EXT3 FS on sda1, internal journal
[ 11.618803] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.683479] kjournald starting. Commit interval 5 seconds
[ 11.683916] EXT3 FS on dm-0, internal journal
[ 11.683921] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.742654] kjournald starting. Commit interval 5 seconds
[ 11.743075] EXT3 FS on dm-1, internal journal
[ 11.743080] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.804619] kjournald starting. Commit interval 5 seconds
[ 11.805041] EXT3 FS on dm-2, internal journal
[ 11.805046] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.860588] kjournald starting. Commit interval 5 seconds
[ 11.861018] EXT3 FS on dm-3, internal journal
[ 11.861023] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.863017] kjournald starting. Commit interval 5 seconds
[ 11.863511] EXT3 FS on dm-4, internal journal
[ 11.863516] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.047909] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
[ 13.653246] find used greatest stack depth: 4528 bytes left
[ 19.324521] 0000:04:00.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 19.324526] 0000:04:00.0: eth0: 10/100 speed: disabling TSO
|
_________________
¡ hey, hou, hou, hey ! |
|
| Back to top |
|
|
PatomaS
Tux's lil' helper
Joined: 09 Feb 2006
Posts: 128
|
| Posted: Mon Mar 02, 2009 6:33 am Post subject: |
|
|
Part 3:
Xorg.0.log:
| Quote: |
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r8 x86_64
Current Operating System: Linux patitohost 2.6.27-gentoo-r8 #10 SMP PREEMPT Sun Mar 1 16:13:12 MYT 2009 x86_64
Build Date: 01 March 2009 08:06:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 2 14:13:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/liberationfonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/freefont-ttf/,
/usr/share/fonts/cheapskatefonts,
/usr/share/fonts/freefonts,
/usr/share/fonts/terminus,
/usr/share/fonts/Speedo,
/usr/share/fonts/corefonts,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
built-ins
(**) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x790060
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] rev 0, Mem @ 0x80000000/268435456, 0x90200000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0x90210000/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/lib64/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib64/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.5.3, module version = 1.2.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.4, built from dist of git branch master, commit 4e897263
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected XAA 2D acceleration.
(II) RADEONHD(0): Unknown card detected: 0x7142:0x1458:0x2148.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x7142:0x1458:0x2148: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV515 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0x90200000 to 0x7f76e7756000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x2148
IOBaseAddress: 0x3000
Filename: S3A76901.101
BIOS Bootup Message:
GV-RX13P256DE-RH F20
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x10000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering turned off by default. Use Option "DRI" to enable.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DVI-I CRT1 DFP3", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_DACA, RHD_OUTPUT_LVTMA } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I DFP1", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 1
(==) RADEONHD(0): Setting TMDS B to incoherent
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV SVIDEO
(==) RADEONHD(0): Setting TMDS A to incoherent
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-D 2
(--) RADEONHD(0): Attaching Output DAC B to Connector VGA 1
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput TV_SVIDEO for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_2 for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC B
(II) RADEONHD(0): Output DVI-I_1/analog using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output TV_SVIDEO has no monitor section
(II) RADEONHD(0): Output DVI-D_2 has no monitor section
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for VX2025wm
(II) RADEONHD(0): Manufacturer: VSC Model: e51d Serial#: 16843009
(II) RADEONHD(0): Year: 2006 Week: 28
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): Default color space is primary color space
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.352 greenX: 0.288 greenY: 0.628
(II) RADEONHD(0): blueX: 0.144 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Supported VESA Video Modes:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@67Hz
(II) RADEONHD(0): 640x480@72Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@72Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@70Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported Future Video Modes:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): #4: hsize: 640 vsize 400 refresh: 70 vid: 2609
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEONHD(0): Serial No: Q6Y062806478
(II) RADEONHD(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 170 MHz
(II) RADEONHD(0): Monitor name: VX2025wm
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff005a631de501010101
(II) RADEONHD(0): 1c100103802b1b782ecfe5a35a49a024
(II) RADEONHD(0): 135054bfef80b30f81808140714f310a
(II) RADEONHD(0): 01010101010121399030621a274068b0
(II) RADEONHD(0): 3600b10f1100001c000000ff00513659
(II) RADEONHD(0): 3036323830363437380a000000fd0032
(II) RADEONHD(0): 4b1e5211000a202020202020000000fc
(II) RADEONHD(0): 00565832303235776d0a2020202000df
(II) RADEONHD(0): DAC B: Sensed Output: VGA
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed.
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output TV_SVIDEO disconnected
(II) RADEONHD(0): Output DVI-D_2 disconnected
(II) RADEONHD(0): Output VGA_1 connected
(II) RADEONHD(0): Using fuzzy aspect match for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1024x768
(II) RADEONHD(0): Output VGA_1 using initial mode 1024x768
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1680x1680 Framebuffer with 1728 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00B13000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x00B1B000 (size = 0x01999000)
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0x90200000 to 0x7f76e7756000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0x80000000 to 0x7f76d3678000 (size 0x10000000)
(II) RADEONHD(0): Using MMIO Command Submission for acceleration.
(II) RADEONHD(0): Using 3883 scanlines of offscreen memory
(II) RADEONHD(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
14 512x512 slots
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEONHD(0): RandR: While switching off TV_SVIDEO: output DAC B is also used by VGA_1 - ignoring
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
None
(II) RADEONHD(0): On Crtc 1 Setting 60.0 Hz Mode: Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
None
(II) RADEONHD(0): DAC2_CRTC2 BG Adjustment: 0x5
(II) RADEONHD(0): DAC2_CRTC2 DAC Adjustment: 0xe
(WW) RADEONHD(0): RandR: While switching off TV_SVIDEO: output DAC B is also used by VGA_1 - ignoring
(II) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: No Textured Video possible without the Command Processor.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/hal: Adding input device Logitech USB RECEIVER
(**) Logitech USB RECEIVER: always reports core events
(**) Logitech USB RECEIVER: Device: "/dev/input/event0"
(II) Logitech USB RECEIVER: Found 16 mouse buttons
(II) Logitech USB RECEIVER: Found x and y relative axes
(II) Logitech USB RECEIVER: Configuring as mouse
(**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
(**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE)
|
Some of the things I have tried are:
- reemerge the system (just in case)
- reemerge xorg 1.3
- try different video drivers (radeon, radeon hd and fglrx)
- try xorg 1.5
- reemerge hald
- upgrade hald
- reemerge acpid
- disable acpid
- reemerge evdev
- disable thigs to reduce elements (alsa, usb, acpi, ... ) Up to a point, for instance, my mouse is usb
- ...
I haven't changed the kernel but so far, I think there is no serious problem with gentoo-sources-2.6.27-r8
Well, I'll try to think of something else, but any help will be very appreciated.
Bye
_________________
¡ hey, hou, hou, hey ! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
