Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in

  FAQ | Search | Memberlist | Usergroups | Statistics | Profile | Log in to check your private messages | Log in | Register

Problems with cups
 View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Tue Jul 29, 2003 9:51 am    Post subject: Problems with cups Reply with quote
Hi !
When I try to print test page on http://127.0.0.1:631 nothink happen but cups is writing that job is completed. when I try to restart this job it throw client-error-not-possible.
I configure my printer (HP Deskjet 920c) according to http://www.gentoo.org/doc/en/printing-howto.xml and I'm using hpijs driver.
In my var/log/cups/errors is such message restart_job: job #1 cannot be restarted - no files!

Thanks for help
Back to top
View user's profile Send private message
lanius
Retired Dev
Retired Dev


Joined: 08 Dec 2002
Posts: 160
PostPosted: Tue Jul 29, 2003 7:32 pm    Post subject: Reply with quote
set LogLevel debug in your cupsd.conf and see if the log gives you a bit more information
Back to top
View user's profile Send private message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Wed Jul 30, 2003 9:27 am    Post subject: Reply with quote
This is my error-log after setting log level to debug

I [30/Jul/2003:10:53:56 +0000] Listening to 7f000001:631
I [30/Jul/2003:10:53:56 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:10:53:56 +0000] Configured for up to 100 clients.
I [30/Jul/2003:10:53:56 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:10:53:56 +0000] Full reload is required.
I [30/Jul/2003:10:53:58 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:10:53:58 +0000] LoadPPDs: No new or changed PPDs...
I [30/Jul/2003:10:53:58 +0000] Full reload complete.
I [30/Jul/2003:11:04:16 +0000] Listening to 7f000001:631
I [30/Jul/2003:11:04:16 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:11:04:16 +0000] Configured for up to 100 clients.
I [30/Jul/2003:11:04:16 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:11:04:16 +0000] Full reload is required.
I [30/Jul/2003:11:04:18 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:11:04:18 +0000] LoadPPDs: No new or changed PPDs...
I [30/Jul/2003:11:04:18 +0000] Full reload complete.
I [30/Jul/2003:11:23:49 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16360)
I [30/Jul/2003:11:23:55 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16361)
I [30/Jul/2003:11:23:55 +0000] Adding start banner page "none" to job 9.
I [30/Jul/2003:11:23:55 +0000] Adding end banner page "none" to job 9.
I [30/Jul/2003:11:23:55 +0000] Job 9 queued on 'HP' by ''.
I [30/Jul/2003:11:23:55 +0000] Started filter /usr/lib/cups/filter/pstops (PID 16362) for job 9.
I [30/Jul/2003:11:23:55 +0000] Started filter /usr/lib/cups/filter/foomatic-rip (PID 16363) for job 9.
I [30/Jul/2003:11:23:55 +0000] Started backend /usr/lib/cups/backend/parallel (PID 16364) for job 9.
E [30/Jul/2003:11:23:57 +0000] PID 16363 stopped with status 3!
I [30/Jul/2003:11:23:57 +0000] Hint: Try setting the LogLevel to "debug" to find out more.
I [30/Jul/2003:11:24:15 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16369)
I [30/Jul/2003:11:24:17 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16370)
I [30/Jul/2003:11:24:21 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16374)
E [30/Jul/2003:11:24:21 +0000] restart_job: job #9 cannot be restarted - no file
Back to top
View user's profile Send private message
lanius
Retired Dev
Retired Dev


Joined: 08 Dec 2002
Posts: 160
PostPosted: Wed Jul 30, 2003 10:00 am    Post subject: Reply with quote
is "Printer Testing Using cat", described in the howto, working? what hpijs version and cups version do you use?
Back to top
View user's profile Send private message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Wed Jul 30, 2003 11:47 am    Post subject: Reply with quote
cat text.txt> /dev/lp0 works , I've hpijs-1.4.1 and cups-1.1.19-r1
Back to top
View user's profile Send private message
lanius
Retired Dev
Retired Dev


Joined: 08 Dec 2002
Posts: 160
PostPosted: Wed Jul 30, 2003 11:52 am    Post subject: Reply with quote
strange, but loglevel ist still not debug, please set it to debug, restart cups, try to print again and post the output of error_log :)
Back to top
View user's profile Send private message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Wed Jul 30, 2003 12:29 pm    Post subject: Reply with quote
i forget to restart cups :oops:
[30/Jul/2003:14:31:12 +0000] Listening to 7f000001:631
D [30/Jul/2003:14:31:12 +0000] AddLocation: added location '/'
D [30/Jul/2003:14:31:12 +0000] DenyIP: / deny 00000000/00000000
D [30/Jul/2003:14:31:12 +0000] AllowIP: / allow 7f000001/ffffffff
D [30/Jul/2003:14:31:12 +0000] AddLocation: added location '/admin'
D [30/Jul/2003:14:31:12 +0000] DenyIP: /admin deny 00000000/00000000
D [30/Jul/2003:14:31:12 +0000] AllowIP: /admin allow 7f000001/ffffffff
I [30/Jul/2003:14:31:12 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Jul/2003:14:31:12 +0000] Configured for up to 100 clients.
I [30/Jul/2003:14:31:12 +0000] Allowing up to 100 client connections per host.
I [30/Jul/2003:14:31:12 +0000] Full reload is required.
D [30/Jul/2003:14:31:12 +0000] LoadAllPrinters: Loading printer HP...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "ipp"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "lpd"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp0"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp1"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp2"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp3"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp4"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp5"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp6"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp7"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp8"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp9"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp10"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp11"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp12"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp13"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp14"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "usb:/dev/usblp15"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "http"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "scsi"...
D [30/Jul/2003:14:31:13 +0000] LoadDevices: Added device "parallel:/dev/lp0"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [30/Jul/2003:14:31:14 +0000] LoadDevices: Added device "socket"...
I [30/Jul/2003:14:31:15 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 12 PPDs...
I [30/Jul/2003:14:31:15 +0000] LoadPPDs: No new or changed PPDs...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Scanning /var/spool/cups...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 1...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 3...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 4...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 5...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 6...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 7...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 8...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 9...
D [30/Jul/2003:14:31:15 +0000] LoadAllJobs: Loading attributes for job 10...
I [30/Jul/2003:14:31:15 +0000] Full reload complete.
D [30/Jul/2003:14:31:15 +0000] StartListening: NumListeners=1
D [30/Jul/2003:14:31:15 +0000] StartListening: address=7f000001 port=631
D [30/Jul/2003:14:31:15 +0000] ResumeListening: setting input bits...
D [30/Jul/2003:14:32:48 +0000] AcceptClient() 5 from localhost:631.
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET / HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET /cups.css HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:48 +0000] ReadClient() 5 GET /images/navbar.gif HTTP/1.1
D [30/Jul/2003:14:32:48 +0000] SendFile() 5 file=6
D [30/Jul/2003:14:32:57 +0000] ReadClient() 5 GET /printers HTTP/1.1
D [30/Jul/2003:14:32:57 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1106
I [30/Jul/2003:14:32:57 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1106)
D [30/Jul/2003:14:32:57 +0000] SendCommand() 5 file=8
D [30/Jul/2003:14:32:58 +0000] AcceptClient() 6 from localhost:631.
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 POST / HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] ProcessIPPRequest: 6 status_code=0
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 POST / HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] ProcessIPPRequest: 6 status_code=1
D [30/Jul/2003:14:32:58 +0000] CloseClient() 6
D [30/Jul/2003:14:32:58 +0000] AcceptClient() 6 from localhost:631.
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/left.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/right.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=9
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/printer-idle.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/print-test-page.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=9
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/stop-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/reject-jobs.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/modify-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/config-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 5 GET /images/delete-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:32:58 +0000] ReadClient() 6 GET /images/add-printer.gif HTTP/1.1
D [30/Jul/2003:14:32:58 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:33:01 +0000] ReadClient() 5 GET /printers/HP?op=print-test-page HTTP/1.1
D [30/Jul/2003:14:33:01 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1107
I [30/Jul/2003:14:33:01 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1107)
D [30/Jul/2003:14:33:01 +0000] SendCommand() 5 file=9
D [30/Jul/2003:14:33:01 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:01 +0000] ReadClient() 8 POST /printers/HP HTTP/1.1
D [30/Jul/2003:14:33:01 +0000] print_job: request file type is application/postscript.
D [30/Jul/2003:14:33:01 +0000] check_quotas: requesting-user-name = ''
D [30/Jul/2003:14:33:01 +0000] print_job: requesting-user-name = ''
D [30/Jul/2003:14:33:01 +0000] Adding default job-sheets values "none,none"...
I [30/Jul/2003:14:33:01 +0000] Adding start banner page "none" to job 11.
I [30/Jul/2003:14:33:01 +0000] Adding end banner page "none" to job 11.
I [30/Jul/2003:14:33:01 +0000] Job 11 queued on 'HP' by ''.
D [30/Jul/2003:14:33:01 +0000] Job 11 hold_until = 0
D [30/Jul/2003:14:33:01 +0000] StartJob(11, 0x8091e90)
D [30/Jul/2003:14:33:01 +0000] StartJob() id = 11, file = 0/1
D [30/Jul/2003:14:33:01 +0000] job-sheets=none,none
D [30/Jul/2003:14:33:01 +0000] banner_page = 0
D [30/Jul/2003:14:33:01 +0000] StartJob: argv = "HP","11","","Test Page","1","","/var/spool/cups/d00011-001"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[2]="USER=root"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[3]="CHARSET=iso-8859-1"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[4]="LANG=en"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[5]=""
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[6]="PPD=/etc/cups/ppd/HP.ppd"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[11]="DEVICE_URI=parallel:/dev/lp0"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[12]="PRINTER=HP"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [30/Jul/2003:14:33:01 +0000] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jul/2003:14:33:01 +0000] StartJob: statusfds = [ 10 11 ]
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[1] = [ 12 -1 ]
D [30/Jul/2003:14:33:01 +0000] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[0] = [ 13 14 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/filter/pstops", 0xbffe9850, 0xbffe8bc0, 12, 14, 11)
I [30/Jul/2003:14:33:01 +0000] Started filter /usr/lib/cups/filter/pstops (PID 1108) for job 11.
D [30/Jul/2003:14:33:01 +0000] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[1] = [ 12 15 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffe9850, 0xbffe8bc0, 13, 15, 11)
I [30/Jul/2003:14:33:01 +0000] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1109) for job 11.
D [30/Jul/2003:14:33:01 +0000] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [30/Jul/2003:14:33:01 +0000] StartJob: filterfds[0] = [ -1 13 ]
D [30/Jul/2003:14:33:01 +0000] start_process("/usr/lib/cups/backend/parallel", 0xbffe9850, 0xbffe8bc0, 12, 13, 11)
I [30/Jul/2003:14:33:01 +0000] Started backend /usr/lib/cups/backend/parallel (PID 1110) for job 11.
D [30/Jul/2003:14:33:01 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:02 +0000] CloseClient() 8
D [30/Jul/2003:14:33:02 +0000] [Job 11] Page = 612x792; 18,36 to 594,783
D [30/Jul/2003:14:33:02 +0000] [Job 11] slowcollate=0, slowduplex=0, sloworder=0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BoundingBox: 0 0 612 792
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Pages: 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%LanguageLevel: 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentData: Clean7Bit
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentSuppliedResources: procset testprint/1.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Creator: Michael Sweet, Easy Software Products
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%CreationDate: May 11, 1999
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Title: Test Page
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndComments
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BeginProlog
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%BeginResource procset testprint 1.1 0
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndResource
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%EndProlog
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Page: 1 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] 0 %%Page: 1 1
D [30/Jul/2003:14:33:02 +0000] [Job 11] pw = 576.0, pl = 747.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageLeft = 18.0, PageRight = 594.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageTop = 783.0, PageBottom = 36.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] PageWidth = 612.0, PageLength = 792.0
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Setting locale failed.
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Please check that your locale settings:
D [30/Jul/2003:14:33:02 +0000] [Job 11] LANGUAGE = (unset),
D [30/Jul/2003:14:33:02 +0000] [Job 11] LC_ALL = (unset),
D [30/Jul/2003:14:33:02 +0000] [Job 11] LANG = "en"
D [30/Jul/2003:14:33:02 +0000] [Job 11] are supported and installed on your system.
D [30/Jul/2003:14:33:02 +0000] [Job 11] perl: warning: Falling back to the standard locale ("C").
D [30/Jul/2003:14:33:03 +0000] [Job 11] foomatic-rip version $Revision: 3.30 $ running...
D [30/Jul/2003:14:33:03 +0000] [Job 11] Parsing PPD file ...
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option ColorSpace
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Resolution
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PageSize
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PageRegion
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Model
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option ImageableArea
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option PaperDimension
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Duplex
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Quality
D [30/Jul/2003:14:33:03 +0000] [Job 11] Added option Font
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Parameter Summary
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------------
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Spooler: cups
D [30/Jul/2003:14:33:03 +0000] [Job 11] Printer: HP
D [30/Jul/2003:14:33:03 +0000] [Job 11] PPD file: /etc/cups/ppd/HP.ppd
D [30/Jul/2003:14:33:03 +0000] [Job 11] Printer model: HP DeskJet 920C, Foomatic + hpijs (recommended)
D [30/Jul/2003:14:33:03 +0000] [Job 11] Job title: Test Page
D [30/Jul/2003:14:33:03 +0000] [Job 11] File(s) to be printed:
D [30/Jul/2003:14:33:03 +0000] [Job 11] <STDIN>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] ================================================
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] File: <STDIN>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] ================================================
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Reading PostScript input ...
D [30/Jul/2003:14:33:03 +0000] [Job 11] --> This document is DSC-conforming!
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginProlog
D [30/Jul/2003:14:33:03 +0000] [Job 11] 0 %%EOF
D [30/Jul/2003:14:33:03 +0000] [Job 11] Saw EOF!
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%EndProlog
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginSetup
D [30/Jul/2003:14:33:03 +0000] [Job 11] Inserting PostScript code for CUPS' page accounting
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *PrintoutMode Normal
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PrintoutMode=Normal --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PrintoutMode=Normal --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *Quality FromPrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Quality=FromPrintoutMode --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Quality=FromPrintoutMode --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *PageSize Letter
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PageSize=Letter --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: PageSize=Letter --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%BeginFeature: *Duplex None
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Duplex=None --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %% FoomaticRIPOptionSetting: Duplex=None
D [30/Jul/2003:14:33:03 +0000] [Job 11] Option: Duplex=None --> Setting option
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found: %%EndSetup
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] -----------
D [30/Jul/2003:14:33:03 +0000] [Job 11] New page: 1 1
D [30/Jul/2003:14:33:03 +0000] [Job 11] Inserting option code into "PageSetup" section.
D [30/Jul/2003:14:33:03 +0000] [Job 11] No page header or page header not DSC-conforming
D [30/Jul/2003:14:33:03 +0000] [Job 11] Stopping search for page header options
D [30/Jul/2003:14:33:03 +0000] [Job 11] Found:
D [30/Jul/2003:14:33:03 +0000] [Job 11] pageHeight sub % Move down...
D [30/Jul/2003:14:33:03 +0000] [Job 11] --> Output goes directly to the renderer now.
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Starting renderer
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer PID pid4=1112
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="DESKJET 920" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dDuplex=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2 -dIjsUseOutputFD -sOutputFile=- -
D [30/Jul/2003:14:33:03 +0000] [Job 11] JCL: <job data>
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Setting locale failed.
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Please check that your locale settings:
D [30/Jul/2003:14:33:03 +0000] [Job 11] LANGUAGE = (unset),
D [30/Jul/2003:14:33:03 +0000] [Job 11] LC_ALL = (unset),
D [30/Jul/2003:14:33:03 +0000] [Job 11] LANG = "en"
D [30/Jul/2003:14:33:03 +0000] [Job 11] are supported and installed on your system.
D [30/Jul/2003:14:33:03 +0000] [Job 11] perl: warning: Falling back to the standard locale ("C").
D [30/Jul/2003:14:33:03 +0000] [Job 11] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=DESKJET 920' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-dDuplex=false' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2' '-dIjsUseOutputFD' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer return value: 139
D [30/Jul/2003:14:33:03 +0000] [Job 11] renderer received signal: 139
D [30/Jul/2003:14:33:03 +0000] [Job 11] Flushing FIFO.
D [30/Jul/2003:14:33:03 +0000] [Job 11]
D [30/Jul/2003:14:33:03 +0000] [Job 11] Closing renderer
D [30/Jul/2003:14:33:03 +0000] [Job 11] KID3 exited with status 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Renderer exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Process dieing with "The renderer may have dumped core.", exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] The renderer may have dumped core.
D [30/Jul/2003:14:33:03 +0000] [Job 11] tail process done writing data to STDOUT
D [30/Jul/2003:14:33:03 +0000] [Job 11] KID4 finished
D [30/Jul/2003:14:33:03 +0000] [Job 11] Renderer process finished
D [30/Jul/2003:14:33:03 +0000] [Job 11] Process dieing with "Error closing renderer", exit stat: 3
D [30/Jul/2003:14:33:03 +0000] [Job 11] Error closing renderer
E [30/Jul/2003:14:33:03 +0000] PID 1109 stopped with status 3!
D [30/Jul/2003:14:33:03 +0000] UpdateJob: job 11, file 0 is complete.
D [30/Jul/2003:14:33:03 +0000] CancelJob: id = 11
D [30/Jul/2003:14:33:03 +0000] StopJob: id = 11, force = 0
D [30/Jul/2003:14:33:03 +0000] StopJob: printer state is 3
D [30/Jul/2003:14:33:13 +0000] ReadClient() 6 GET /printers/HP HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 1115
I [30/Jul/2003:14:33:13 +0000] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1115)
D [30/Jul/2003:14:33:13 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:13 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=1
D [30/Jul/2003:14:33:13 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:13 +0000] CloseClient() 8
D [30/Jul/2003:14:33:13 +0000] ReadClient() 5 GET /images/show-completed.gif HTTP/1.1
D [30/Jul/2003:14:33:13 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:33:16 +0000] ReadClient() 6 GET /jobs HTTP/1.1
D [30/Jul/2003:14:33:16 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1116
I [30/Jul/2003:14:33:16 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1116)
D [30/Jul/2003:14:33:16 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:16 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:16 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:16 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:16 +0000] CloseClient() 8
D [30/Jul/2003:14:33:18 +0000] ReadClient() 5 GET /jobs?which_jobs=completed HTTP/1.1
D [30/Jul/2003:14:33:18 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1117
I [30/Jul/2003:14:33:18 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1117)
D [30/Jul/2003:14:33:18 +0000] SendCommand() 5 file=9
D [30/Jul/2003:14:33:18 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:18 +0000] ReadClient() 8 POST / HTTP/1.1
D [30/Jul/2003:14:33:18 +0000] ProcessIPPRequest: 8 status_code=0
D [30/Jul/2003:14:33:18 +0000] CloseClient() 8
D [30/Jul/2003:14:33:19 +0000] ReadClient() 6 GET /images/restart-job.gif HTTP/1.1
D [30/Jul/2003:14:33:19 +0000] SendFile() 6 file=8
D [30/Jul/2003:14:33:19 +0000] ReadClient() 5 GET /images/show-active.gif HTTP/1.1
D [30/Jul/2003:14:33:19 +0000] SendFile() 5 file=8
D [30/Jul/2003:14:33:22 +0000] ReadClient() 6 GET /jobs/?op=restart-job&job_id=11&job_printer_uri=/printers/HP HTTP/1.1
D [30/Jul/2003:14:33:22 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 1118
I [30/Jul/2003:14:33:22 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=1118)
D [30/Jul/2003:14:33:22 +0000] SendCommand() 6 file=9
D [30/Jul/2003:14:33:22 +0000] AcceptClient() 8 from localhost:631.
D [30/Jul/2003:14:33:22 +0000] ReadClient() 8 POST /jobs HTTP/1.1
E [30/Jul/2003:14:33:22 +0000] restart_job: job #11 cannot be restarted - no files!
D [30/Jul/2003:14:33:22 +0000] Sending error: client-error-not-possible
D [30/Jul/2003:14:33:22 +0000] ProcessIPPRequest: 8 status_code=404
D [30/Jul/2003:14:33:22 +0000] CloseClient() 8
D [30/Jul/2003:14:34:24 +0000] CloseClient() 5
D [30/Jul/2003:14:34:24 +0000] CloseClient() 6
Back to top
View user's profile Send private message
lanius
Retired Dev
Retired Dev


Joined: 08 Dec 2002
Posts: 160
PostPosted: Wed Jul 30, 2003 12:37 pm    Post subject: Reply with quote
hm, try to remerge ghostscript
Back to top
View user's profile Send private message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Thu Jul 31, 2003 8:36 am    Post subject: Reply with quote
still nothing :cry:
Back to top
View user's profile Send private message
lanius
Retired Dev
Retired Dev


Joined: 08 Dec 2002
Posts: 160
PostPosted: Thu Jul 31, 2003 8:57 am    Post subject: Reply with quote
sorry, no idea :(

you could ty to remerge hpijs, remove your printer and reinstall him.
Back to top
View user's profile Send private message
artek
n00b
n00b


Joined: 29 Jul 2003
Posts: 6
PostPosted: Thu Jul 31, 2003 9:30 am    Post subject: Reply with quote
ok ,thanks for help
Back to top
View user's profile Send private message
Slynix
n00b
n00b


Joined: 11 May 2003
Posts: 67
PostPosted: Sat Oct 18, 2003 8:29 pm    Post subject: Reply with quote
heino wrote:
hm, try to remerge ghostscript



Gaaah been looking for this all day :P This happens to me often when I Install my printer. I forget to emerge ghostscript.

I had exactly the same problem as artek and thi fixed it :D
_________________
a big bear hug
Back to top
View user's profile Send private message
vortex01
n00b
n00b


Joined: 27 Oct 2003
Posts: 6
PostPosted: Thu Oct 28, 2004 12:20 pm    Post subject: Reply with quote
This also happens to me.

But in my search, I found

https://forums.gentoo.org/viewtopic.php?p=1684842#1684842

Which mentions a known ghostscript bug.

Also mentions downgrading to ghostscript-7.07.1-r1 fixes, but beware or put up with known vulnerabilities.

Stepping down to r1 fixed this issue for me.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



 Links: forums.gentoo.org | www.gentoo.org | bugs.gentoo.org | wiki.gentoo.org | forum-mods@gentoo.org

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy