| View previous topic :: View next topic |
| Author |
Message |
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
 Posted: Sat Oct 04, 2008 8:08 pm Post subject: smartctl error messages in log |
 |
|
Hi,
I recently got the following two error entries on one of my eldest drives:
| Quote: | SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 2358 hours (98 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 01 01 01 00 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 d0 a2 20 e0 00 02:41:04.762 READ DMA EXT
25 00 08 38 84 20 e0 00 02:41:04.759 READ DMA EXT
25 00 08 50 64 20 e0 00 02:41:04.746 READ DMA EXT
25 00 08 b8 40 20 e0 00 02:41:04.834 READ DMA EXT
25 00 08 f8 0b 20 e0 00 02:41:04.826 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 2356 hours (98 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 01 01 01 00 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 08 36 0c e0 00 00:46:38.534 READ DMA EXT
25 00 08 f8 35 0c e0 00 00:46:38.543 READ DMA EXT
25 00 08 40 35 0c e0 00 00:46:38.542 READ DMA EXT
25 00 08 28 35 0c e0 00 00:46:38.541 READ DMA EXT
25 00 08 18 35 0c e0 00 00:46:38.541 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2389 -
# 2 Short offline Completed without error 00% 2366 -
# 3 Extended offline Completed without error 00% 2236 -
# 4 Short offline Completed without error 00% 2232 -
# 5 Extended offline Completed without error 00% 2034 -
# 6 Extended offline Completed without error 00% 1845 -
# 7 Extended captive Interrupted (host reset) 90% 1836 -
# 8 Conveyance offline Completed without error 00% 1727 -
# 9 Extended offline Completed without error 00% 1549 -
#10 Extended captive Interrupted (host reset) 90% 1493 -
#11 Extended captive Interrupted (host reset) 90% 1457 -
#12 Conveyance offline Completed without error 00% 1452 -
#13 Extended offline Completed without error 00% 1449 -
#14 Short offline Completed without error 00% 1448 -
#15 Short captive Interrupted (host reset) 80% 1188 -
#16 Short captive Interrupted (host reset) 80% 1188 -
#17 Short captive Interrupted (host reset) 80% 1188 -
#18 Short captive Interrupted (host reset) 80% 1188 -
#19 Short captive Interrupted (host reset) 80% 1188 -
#20 Short captive Interrupted (host reset) 80% 1188 -
#21 Conveyance offline Completed without error 00% 1188 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. |
any ideas, if it's an critical error (critical -> drive will die in the near future) ?
many thanks in advance
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa
Hardcore Gentoo Linux user since 2004  |
|
| Back to top |
|
 |
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9890
Location: almost Mile High in the USA
|
| Posted: Sun Oct 05, 2008 6:22 pm Post subject: |
|
|
It looks like an PATA/SATA transfer error, you're probably safe... Should check your cables if it happens again.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
