View previous topic :: View next topic |
Author |
Message |
spiryt n00b


Joined: 22 Feb 2004 Posts: 45
|
Posted: Thu Nov 06, 2008 12:54 pm Post subject: Asus P5Q Pro - Marvel Sata - Only one port is working |
|
|
Hi,
I have an Asus P5Q Pro motherboard with Intel ICH10 and Marvel sata controllers
[code]03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)[/code]
In BIOS i have AHCI mode configured along Normal mode with Drive X pert.
[code]03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)[/code]
The problem is that only one port of the marvel controller is being seen by the kernel. The other port is simply not showing.
Aparrently the Marvel controller uses pmp. (I can get two drives to show under windblows). I was under the impression that libata provided port multiplier support. I am running gentoo-kernel 2.6.27.
dmesg is showing the second port with the following line:
[code][ 10.494275] ata8: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffd80 irq 16
[ 11.120028] ata8: SATA link down (SStatus 0 SControl 300)[/code]
I have tried swapping the cables just to make sure that it is not the physical connection problem but it does not look like it is.
Any ideas anyone ? |
|
Back to top |
|
 |
KarlisRepsons Apprentice

Joined: 03 Nov 2008 Posts: 229 Location: Latvia
|
Posted: Sat Nov 08, 2008 7:11 pm Post subject: |
|
|
Anyone got eSATA to work normally on this kind of board? |
|
Back to top |
|
 |
fbcyborg Advocate


Joined: 16 Oct 2005 Posts: 3056 Location: ROMA
|
|
Back to top |
|
 |
Martux Veteran


Joined: 04 Feb 2005 Posts: 1917
|
Posted: Sat Apr 25, 2009 9:33 am Post subject: |
|
|
fbcyborg wrote: | Yes, my external sata works like a charm. |
Where did you connect the ESATA? On the ICH10 ports or on the Marvell ones?
It works here too, but not with automounting (ICH10). _________________ "Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction" |
|
Back to top |
|
 |
fbcyborg Advocate


Joined: 16 Oct 2005 Posts: 3056 Location: ROMA
|
|
Back to top |
|
 |
Martux Veteran


Joined: 04 Feb 2005 Posts: 1917
|
Posted: Sat Apr 25, 2009 10:12 am Post subject: |
|
|
That' s afaik the ich10 port. I also connected it there, so I could deactivate the Marvell chipset in bios.
I don' t think automount will works. _________________ "Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction" |
|
Back to top |
|
 |
fbcyborg Advocate


Joined: 16 Oct 2005 Posts: 3056 Location: ROMA
|
|
Back to top |
|
 |
Martux Veteran


Joined: 04 Feb 2005 Posts: 1917
|
Posted: Sat Apr 25, 2009 11:03 am Post subject: |
|
|
The ICH10 ones are the black connectors, the marvell ones the coloured.
At least that' s with my p5q.
For the mounting I did an alias in my /root/.bashrc to minimize the hassle. _________________ "Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction" |
|
Back to top |
|
 |
fbcyborg Advocate


Joined: 16 Oct 2005 Posts: 3056 Location: ROMA
|
|
Back to top |
|
 |
|