Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Iriver T60/T50 i Gentoo. [SOLVED]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt
View previous topic :: View next topic  
Author Message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Thu Aug 21, 2008 8:17 pm    Post subject: Iriver T60/T50 i Gentoo. [SOLVED] Reply with quote

Witam.

Posiadam irivera t60 (w temacie dałem również t50 który podobno poza większymi gabarytami niczym się nie różni).
Niestety nie potrafie musić go do działania pod Linuksem, gdzieś wyczytałem, że pracuje na MTP (chyba, choć teraz już nie mam pojęcia) jednak mtpfs po fuse nie wykrył urządzenia, Przez VirtualBoksa a w nim winXP playerek działa i śmiga bez żadnych sterowników, widzi go generalnie jako pendrive, jednak w dmesg mam jedynie:

Code:
[54675.254150] usb 7-5: new high speed USB device using ehci_hcd and address 23
[54675.387312] usb 7-5: configuration #1 chosen from 1 choice
[54675.388832] scsi22 : SCSI emulation for USB Mass Storage devices
[54675.391308] usb-storage: device found at 23
[54675.391308] usb-storage: waiting for device to settle before scanning
[54680.392197] scsi scan: INQUIRY result too short (5), using 36
[54680.392212] scsi 22:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0
[54680.394786] sd 22:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[54680.394786] sd 22:0:0:0: [sdb] 1 512-byte hardware sectors (0 MB)
[54680.395452] sd 22:0:0:0: [sdb] Write Protect is off
[54680.395460] sd 22:0:0:0: [sdb] Mode Sense: 03 00 00 00
[54680.395465] sd 22:0:0:0: [sdb] Assuming drive cache: write through
[54680.396602] sd 22:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[54680.396611] sd 22:0:0:0: [sdb] 1 512-byte hardware sectors (0 MB)
[54680.397375] sd 22:0:0:0: [sdb] Write Protect is off
[54680.397383] sd 22:0:0:0: [sdb] Mode Sense: 03 00 00 00
[54680.397388] sd 22:0:0:0: [sdb] Assuming drive cache: write through
[54680.397393]  sdb:
[54680.428047] sd 22:0:0:0: [sdb] Attached SCSI disk
[54680.428144] sd 22:0:0:0: Attached scsi generic sg2 type 0
[54680.429201] usb-storage: device scan complete

Player posiada 4G pamięci - jak to ugryźć? Przeczytałęm w necie troche nt. konwersacji MTP na MSC/UMS i niestety żaden sposób nie zadziałał.


Last edited by SlashBeast on Thu Nov 13, 2008 8:12 pm; edited 1 time in total
Back to top
View user's profile Send private message
Redhot
Apprentice
Apprentice


Joined: 16 Jul 2006
Posts: 196

PostPosted: Thu Aug 21, 2008 9:21 pm    Post subject: Reply with quote

Próbowałeś z
Code:
mount /dev/sdb /media/costam
?
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Fri Aug 22, 2008 6:07 am    Post subject: Reply with quote

Pewnie, dalej kupa. z tego co wynalazłem na CD który dostałęm do irivera ten player jest już w UMS i działa np. na każdym windowsie bez żadnych sterowników cczy WindowsMediaPlayera >=10. Przypomina mi to problem który kiedyś miałem z pendrive pentagramu, również zonk był. Jak znajde chwile zbootuje jakieś łubuntu livecd coby odkryć, czy może w kernelu brak mi czegoś do obsługi tego sprzętu.
Back to top
View user's profile Send private message
one_and_only
Apprentice
Apprentice


Joined: 13 May 2007
Posts: 250
Location: PL/Krakow

PostPosted: Fri Aug 22, 2008 7:00 pm    Post subject: Reply with quote

A np. taki fdisk widzi go?
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Wed Aug 27, 2008 4:50 pm    Post subject: Reply with quote

Code:
jinchuuriki ~ # fdisk -l /dev/sdc
jinchuuriki ~ #

Nie bardzo.

Added: No to tak, jak tylko doładuje akumulatorek i wymienie w playerze przerobie go CrossUpdater'em od iRiver'a na MTP i będe go używał przez amaroka, który wspiera mtp. Ew. jak poczuje moć jedi przerobie go z_powrotem na UMS i może wtedy zadziała.

Arfrever: Ortografia
Back to top
View user's profile Send private message
caruso
Apprentice
Apprentice


Joined: 10 Jul 2005
Posts: 277

PostPosted: Fri Aug 29, 2008 4:36 pm    Post subject: Reply with quote

Jestem w posiadaniu irivera t50 w wersji 1GB. U mnie na gentoo (także na innych linuxach) wykrywa mi sprzęt bezproblemowo i zgrywanie odbywa sie poprzez menadżery plików. Czyli u mnie chodzi poprzez drag&drop i bez dodatkowego programu/sterownika.

wynik dmesg:

Code:
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access     iriver   MP3 T50          0.83 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdc] 1929216 512-byte hardware sectors (988 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 1929216 512-byte hardware sectors (988 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: unknown partition table
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete


Może brakuje Ci jakis opcji w kernelu.
_________________
caruso
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Fri Aug 29, 2008 9:33 pm    Post subject: Reply with quote

Z tego co wyczytałem, UMS w T60 to jakiś zart linux unfriendly, T50 działa jak bajka.
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Thu Nov 13, 2008 7:57 pm    Post subject: Reply with quote

Troche odkopuje. Nie wiem co jest tego przyczyną (może hal?) ale zainstalowałem sobie ostatnio pcmanfm z halem, automount i te bajery, kernel mam 2.6.27 i... mp3 działa.

Code:
[57144.769359] usb 2-3: new high speed USB device using ehci_hcd and address 11
[57144.902255] usb 2-3: configuration #1 chosen from 1 choice
[57144.908560] scsi10 : SCSI emulation for USB Mass Storage devices
[57144.908712] usb-storage: device found at 11
[57144.908715] usb-storage: waiting for device to settle before scanning
[57149.906594] scsi 10:0:0:0: Direct-Access     iriver   MP3 T60          0.83 PQ: 0 ANSI: 2
[57149.908695] sd 10:0:0:0: [sdb] 7858176 512-byte hardware sectors (4023 MB)
[57149.909316] sd 10:0:0:0: [sdb] Write Protect is off
[57149.909319] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
[57149.909322] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[57149.911691] sd 10:0:0:0: [sdb] 7858176 512-byte hardware sectors (4023 MB)
[57149.912453] sd 10:0:0:0: [sdb] Write Protect is off
[57149.912457] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
[57149.912459] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[57149.912462]  sdb:
[57149.944032] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[57149.944177] sd 10:0:0:0: Attached scsi generic sg2 type 0
[57149.944407] usb-storage: device scan complete


Wpinam mp3, pojawia się w pcmanfm, klikam i widze moją muzykę! Kminie przez chwile, sprawdzam dmesg i widać, to naprawde działa.
Back to top
View user's profile Send private message
caruso
Apprentice
Apprentice


Joined: 10 Jul 2005
Posts: 277

PostPosted: Sat Nov 22, 2008 6:06 pm    Post subject: Reply with quote

Ustatnio na domowym komputerze objawiło mi się to samo. Przyczyną był kernel gentoo-sources-2.6.26, po aktualizacji do .27 problem zniknął.
_________________
caruso
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum