| View previous topic :: View next topic |
| Author |
Message |
McTango
n00b
Joined: 11 Dec 2004
Posts: 66
Location: Formosa - Argentina
|
 Posted: Tue Feb 10, 2009 7:36 pm Post subject: Nokia 5300 doesn't works as USB MASS STORAGE |
 |
|
Hi people...
I have a Nokia 5300 with 1GB mem card.
When i plug it to my 2.6.27-gentoo-r8 box, works OK in "Nokia Mode" (as Modem), and connects perfect to GPRS network using KPPP.
But when i plug it as "Mass Storage mode", Gentoo keeps reading phone memory all the time, and doesn't gives access to SDB device.
This is the result of "dmesg":
| Code: | usb 3-1: new full speed USB device using uhci_hcd and address 5
usb 3-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Nokia Nokia 5300 0000 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdb] 1987585 512-byte hardware sectors (1018 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 1987585 512-byte hardware sectors (1018 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
.
.
.
.
|
and keeps sending: | Code: | sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0 |
all the time.
Any ideas?
Thanks.
_________________
Charly Tango
Formosa - Argentina
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
To emerge, or not to emerge: that is the question.
_________________ |
|
| Back to top |
|
 |
mgrela
Tux's lil' helper
Joined: 26 Jul 2008
Posts: 123
Location: Polska
|
| Posted: Wed Feb 11, 2009 10:33 am Post subject: |
|
|
Doest it work under windows ?
Did work earlier under linux ?
_________________
Maciej Grela
You just keep on trying till you run out of cake. |
|
| Back to top |
|
|
McTango
n00b
Joined: 11 Dec 2004
Posts: 66
Location: Formosa - Argentina
|
| Posted: Wed Feb 11, 2009 1:05 pm Post subject: |
|
|
Sorry... I forgot to mention that.
Yes, it works OK under Windows as USB MASS STORAGE (and as MODEM too).
No, never tried to use it before under Linux, until now.
This is my first attempt under non Windows OS
Two additional comments:
-First tried with CellPhone's MicroSD card formatted by Windows, then formatted by the CellPhone's utility (i think i'ts the same, but just in case...). Anyone worked.
-Other USB MASS STORAGE devices like pen drives or MP3s works OK.
Thanks.
_________________
Charly Tango
Formosa - Argentina
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
To emerge, or not to emerge: that is the question.
_________________ |
|
| Back to top |
|
|
eisenmann
n00b
Joined: 08 Jan 2006
Posts: 31
|
| Posted: Wed Feb 18, 2009 10:34 pm Post subject: |
|
|
Hello i have the same problem with my nokia 6300i.
| Code: |
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access Nokia Nokia 6300i 0000 PQ: 0 ANSI: 4
sd 3:0:0:0: [sdb] 3970049 512-byte hardware sectors (2033 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] 3970049 512-byte hardware sectors (2033 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
sd 3:0:0:0: [sdb] Sense Key : 0x0 [current]
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
|
and i found this this to that problem in a other forum:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2008-07/msg12252.html |
|
| Back to top |
|
|
eisenmann
n00b
Joined: 08 Jan 2006
Posts: 31
|
| Posted: Sat Feb 21, 2009 10:49 am Post subject: |
|
|
Hi ,
i have installed kernel 2.6.28-gentoo-r2
now it look fine like this:
| Code: |
scsi2 : SCSI emulation for USB Mass Storage devices
usb 3-1: New USB device found, idVendor=0421, idProduct=00c2
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Nokia 6300i
usb 3-1: Manufacturer: Nokia
usb 3-1: SerialNumber: 354830020969228
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access Nokia Nokia 6300i 0000 PQ: 0 ANSI: 4
sd 2:0:0:0: [sdb] 3970048 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 3970048 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 04 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
|
|
|
| Back to top |
|
|
optiluca
Guru
Joined: 16 Jan 2006
Posts: 551
Location: Rivergaro, Italy
|
|
| Back to top |
|
|
|
Kernel & Hardware
