| View previous topic :: View next topic |
| Author |
Message |
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
 Posted: Sat Mar 28, 2009 11:35 am Post subject: [geloest] Probleme mit Nvidia-Karte |
 |
|
Hallo zusammen,
habe mir eine graka gekauf von Nvidia -> http://www.alternate.de/html/product/Grafikkarten_NVIDIA_AGP/XFX/GF6200/322140/?tn=HARDWARE&l1=Grafik&l2=Karten+AGP&l3=NVIDIA
Hatte vorher nur nen VIA-Onboard Chip drauf, der mit Openchrome schrecklich lief.
Habe jetzt den ...29 Kernel drauf habe die karte eingebaut xorg-conf umgestellt, kernel neu compiliert etc.
jetzt bekomme ich in unregelmäßigen absteaenden freezes, habe fastwrites off und amd system 32-bit.
Hier mal meine dmesg-Ausgabe, jönnt ihr mal schauen ob da paar sachen nicht richtig sind, ja? waere super nett... Vorallem die letzte Zeile macht mir sorgen...
| Quote: | Linux version 2.6.29-gentoo (root@tux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 Fri Mar 27 21:39:13 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ffd0000 @ 10000-15000
ACPI: RSDP 000F80A0, 0014 (r0 ACPIAM)
ACPI: RSDT 1FFD0000, 0030 (r1 A M I OEMRSDT 7000528 MSFT 97)
ACPI: FACP 1FFD0200, 0084 (r2 A M I OEMFACP 7000528 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FFD03F0, 3C07 (r1 1XXXX 1XXXX010 10 INTL 2002026)
ACPI: FACS 1FFDE000, 0040
ACPI: APIC 1FFD0390, 0054 (r1 A M I OEMAPIC 7000528 MSFT 97)
ACPI: OEMB 1FFDE040, 0046 (r1 A M I AMI_OEM 7000528 MSFT 97)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffd0000
low ram: 00000000 - 1ffd0000
bootmap 00011000 - 00014ffc
(6 early reservations) ==> bootmem [0000000000 - 001ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00006320d4] TEXT DATA BSS ==> [0000100000 - 00006320d4]
#2 [0000633000 - 0000636000] INIT_PG_TABLE ==> [0000633000 - 0000636000]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001ffd0
HighMem 0x0001ffd0 -> 0x0001ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffd0
On node 0 totalpages: 130911
free_area_init_node: node 0, pgdat c0557880, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125936 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129887
Kernel command line: root=/dev/sda3 vga=795
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 1800.236 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513612k/524096k available (2942k kernel code, 9860k reserved, 1545k data, 340k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07d0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
.init : 0xc0566000 - 0xc05bb000 ( 340 kB)
.data : 0xc03dfbf4 - 0xc05621d8 (1545 kB)
.text : 0xc0100000 - 0xc03dfbf4 (2942 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.47 BogoMIPS (lpj=1800236)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 320 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfebf7c00-0xfebf7cff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfebf7800-0xfebf78ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xb0000000-0xbfffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xaff00000-0xcfefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - F5, should be E7 [20081204]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x295-0x296 has been reserved
system 00:09: ioport range 0x3e0-0x3e7 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x400-0x41f has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x1fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000aff00000-0x000000cfefffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0xfaa00000-0xfeafffff]
pci_bus 0000:01: resource 2 mem: [0xaff00000-0xcfefffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
microcode: CPU0: AMD CPU family 0xf not supported
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
vesafb: cannot reserve video memory at 0xb0000000
vesafb: framebuffer at 0xb0000000, mapped to 0xe0800000, using 10240k, total 524288k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:d3a0
vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 16 throttling states)
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1c000, 00:11:09:85:91:72, IRQ 23.
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
usbcore: registered new interface driver rt73usb
Linux video capture interface: v2.00
gspca: main v2.4.0 registered
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
Switched to high resolution mode on CPU 0
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
pata_via 0000:00:0f.1: version 0.3.3
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata3.00: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48
ata3.01: ATA-6: Maxtor 4D060H3, DAK019K0, max UDMA/100
ata3.01: 117231408 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Direct-Access ATA Maxtor 4D060H3 DAK0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:1:0: [sdb] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
ata4.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda trayinux version 2.6.29-gentoo (root@tux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 Fri Mar 27 21:39:13 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ffd0000 @ 10000-15000
ACPI: RSDP 000F80A0, 0014 (r0 ACPIAM)
ACPI: RSDT 1FFD0000, 0030 (r1 A M I OEMRSDT 7000528 MSFT 97)
ACPI: FACP 1FFD0200, 0084 (r2 A M I OEMFACP 7000528 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FFD03F0, 3C07 (r1 1XXXX 1XXXX010 10 INTL 2002026)
ACPI: FACS 1FFDE000, 0040
ACPI: APIC 1FFD0390, 0054 (r1 A M I OEMAPIC 7000528 MSFT 97)
ACPI: OEMB 1FFDE040, 0046 (r1 A M I AMI_OEM 7000528 MSFT 97)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffd0000
low ram: 00000000 - 1ffd0000
bootmap 00011000 - 00014ffc
(6 early reservations) ==> bootmem [0000000000 - 001ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00006320d4] TEXT DATA BSS ==> [0000100000 - 00006320d4]
#2 [0000633000 - 0000636000] INIT_PG_TABLE ==> [0000633000 - 0000636000]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001ffd0
HighMem 0x0001ffd0 -> 0x0001ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffd0
On node 0 totalpages: 130911
free_area_init_node: node 0, pgdat c0557880, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125936 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129887
Kernel command line: root=/dev/sda3 vga=795
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 1800.236 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513612k/524096k available (2942k kernel code, 9860k reserved, 1545k data, 340k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07d0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
.init : 0xc0566000 - 0xc05bb000 ( 340 kB)
.data : 0xc03dfbf4 - 0xc05621d8 (1545 kB)
.text : 0xc0100000 - 0xc03dfbf4 (2942 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.47 BogoMIPS (lpj=1800236)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 320 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfebf7c00-0xfebf7cff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfebf7800-0xfebf78ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xb0000000-0xbfffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xaff00000-0xcfefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - F5, should be E7 [20081204]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x295-0x296 has been reserved
system 00:09: ioport range 0x3e0-0x3e7 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x400-0x41f has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x1fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000aff00000-0x000000cfefffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0xfaa00000-0xfeafffff]
pci_bus 0000:01: resource 2 mem: [0xaff00000-0xcfefffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
microcode: CPU0: AMD CPU family 0xf not supported
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
vesafb: cannot reserve video memory at 0xb0000000
vesafb: framebuffer at 0xb0000000, mapped to 0xe0800000, using 10240k, total 524288k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:d3a0
vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 16 throttling states)
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1c000, 00:11:09:85:91:72, IRQ 23.
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
usbcore: registered new interface driver rt73usb
Linux video capture interface: v2.00
gspca: main v2.4.0 registered
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
Switched to high resolution mode on CPU 0
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
pata_via 0000:00:0f.1: version 0.3.3
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata3.00: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48
ata3.01: ATA-6: Maxtor 4D060H3, DAK019K0, max UDMA/100
ata3.01: 117231408 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Direct-Access ATA Maxtor 4D060H3 DAK0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:1:0: [sdb] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
ata4.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
sr 3:0:1:0: Attached scsi generic sg3 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebf7c00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 4
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
w83627hf: Found W83627THF chip at 0x290
w83627hf w83627hf.656: Reading VID from GPIO5
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-8: configuration #1 chosen from 1 choice
Advanced Linux Sound Architecture Driver Version 1.0.18a.
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (rt73usb): not using net_device_ops yet
usb 3-2: new low speed USB device using uhci_hcd and address 2
ALSA device list:
#0: VIA 8237 with ALC655 at 0xc400, irq 22
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 340k freed
usb 3-2: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input3
generic-usb 0003:1241:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.1-2/input0
input: USB Keyboard as /class/input/input4
generic-usb 0003:1241:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.1-2/input1
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: A4Tech USB Full Speed as /class/input/input5
generic-usb 0003:09DA:8090.0003: input: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input0
input: A4Tech USB Full Speed as /class/input/input6
generic-usb 0003:09DA:8090.0004: input: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input1
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k
eth0: link down
rt73usb 1-8:1.0: firmware: requesting rt73.bin
wlan0: authenticate with AP 00:30:f1:aa:5a:26
wlan0: authenticated
wlan0: associate with AP 00:30:f1:aa:5a:26
wlan0: RX AssocResp from 00:30:f1:aa:5a:26 (capab=0x11 status=0 aid=1)
wlan0: associated
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
sr 3:0:1:0: Attached scsi CD-ROM sr1
sr 3:0:1:0: Attached scsi generic sg3 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebf7c00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 4
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
w83627hf: Found W83627THF chip at 0x290
w83627hf w83627hf.656: Reading VID from GPIO5
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-8: configuration #1 chosen from 1 choice
Advanced Linux Sound Architecture Driver Version 1.0.18a.
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (rt73usb): not using net_device_ops yet
usb 3-2: new low speed USB device using uhci_hcd and address 2
ALSA device list:
#0: VIA 8237 with ALC655 at 0xc400, irq 22
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 340k freed
usb 3-2: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input3
generic-usb 0003:1241:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.1-2/input0
input: USB Keyboard as /class/input/input4
generic-usb 0003:1241:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.1-2/input1
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: A4Tech USB Full Speed as /class/input/input5
generic-usb 0003:09DA:8090.0003: input: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input0
input: A4Tech USB Full Speed as /class/input/input6
generic-usb 0003:09DA:8090.0004: input: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input1
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k
eth0: link down
rt73usb 1-8:1.0: firmware: requesting rt73.bin
wlan0: authenticate with AP 00:30:f1:aa:5a:26
wlan0: authenticated
wlan0: associate with AP 00:30:f1:aa:5a:26
wlan0: RX AssocResp from 00:30:f1:aa:5a:26 (capab=0x11 status=0 aid=1)
wlan0: associated
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs |
Last edited by Chris2000 on Thu Apr 16, 2009 2:03 pm; edited 1 time in total |
|
| Back to top |
|
 |
Hollowman
Guru
Joined: 19 Apr 2007
Posts: 584
|
| Posted: Sat Mar 28, 2009 12:32 pm Post subject: |
|
|
Hi
emerge -a nvidia-drivers haste gemacht?
Sebastian |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Sat Mar 28, 2009 12:59 pm Post subject: |
|
|
Natuerlich sonst wuerde ja das nvidia modul nicht laden denke ich...
Habe ich nach dem Kernel kompilieren gemacht, aber was hat es mit dem letzten IRQ Problem auf sich?
Ist der nvidia treiber noch nicht .29 ready? |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Sat Mar 28, 2009 3:00 pm Post subject: |
|
|
Ausgabe von Xorg - Ist da alles in Butter oder klappt irgendwas noch nicht?
| Quote: | X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux tux 2.6.29-gentoo #1 Fri Mar 27 21:39:13 CET 2009 i686
Build Date: 26 October 2008
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 28 15:54:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "PHILIPS 109E"
(**) | |-->Device "Geforce 6200"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e45c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0204 card 1106,0204 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1204 card 1106,1204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2204 card 1106,2204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3204 card 1106,3204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4204 card 1106,4204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7204 card 1106,7204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1462,0320 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1462,0320 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1462,0320 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1462,7020 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1462,0b10 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1462,c03c rev 78 class 02,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0221 card 1682,226a rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfaa00000 - 0xfeafffff (0x4100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xaff00000 - 0xcfefffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xfd000000/24, 0xb0000000/28, 0xfc000000/24, BIOS @ 0xfeae0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd1ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[1] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[4] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[9] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[10] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[16] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[18] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[1] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[4] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[9] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[10] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[16] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[18] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[15] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[22] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[23] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[24] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"(II) Module already built-in
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/extensions//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[15] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[22] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[23] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[24] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[25] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[27] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[28] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "DynamicTwinView" "0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.88
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): PHILIPS 109E5 (CRT-0)
(--) NVIDIA(0): PHILIPS 109E5 (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (90, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[25] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[27] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[28] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
|
|
|
| Back to top |
|
|
Hollowman
Guru
Joined: 19 Apr 2007
Posts: 584
|
| Posted: Sat Mar 28, 2009 4:49 pm Post subject: |
|
|
Gibts einen Grund warum der Acpid nicht läuft? Vielleicht liegt es ja daran.
Sebastian |
|
| Back to top |
|
|
disi
Veteran
Joined: 28 Nov 2003
Posts: 1354
Location: Out There ...
|
| Posted: Sat Mar 28, 2009 5:21 pm Post subject: |
|
|
Also hier laeuft nvidia 180.41 mit gentoo-sources 2.6.29. Ich bekomme die gleiche Ausgabe in dmesg also daran liegt es nicht:
| Code: | IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs |
|
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Sat Mar 28, 2009 9:21 pm Post subject: |
|
|
So, freezes sind immer noch vorhanden... Ich weiss nicht woran das liegt... Hatte das System neu aufgesetzt deswegen war acpid noch nich drauf, jetzt aber - leider keine veraenderung... Ist der der Treiber ueberhaupt schon .29-ready und oder ist das noch nicht 100%ig?
Hier mal die Ausgaben jetzt. Sagt wenn irh noch was braucht... Keine Ahnung woran das liegen koennte... Habe kein Fastwrites aktiviert (da amd) und auch sonst nix uebertaktet, board ist nen k8m neo-V von msi mit k8m800 chipset und neustem bios (version 7) - die oboard grafik habe ich selbstverstaendlich deaktiviert...
dmesg:
| Quote: | Linux version 2.6.29-gentoo (root@tux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 Sat Mar 28 19:51:30 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ffd0000 @ 10000-15000
ACPI: RSDP 000F80A0, 0014 (r0 ACPIAM)
ACPI: RSDT 1FFD0000, 0030 (r1 A M I OEMRSDT 7000528 MSFT 97)
ACPI: FACP 1FFD0200, 0084 (r2 A M I OEMFACP 7000528 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FFD03F0, 3C07 (r1 1XXXX 1XXXX010 10 INTL 2002026)
ACPI: FACS 1FFDE000, 0040
ACPI: APIC 1FFD0390, 0054 (r1 A M I OEMAPIC 7000528 MSFT 97)
ACPI: OEMB 1FFDE040, 0046 (r1 A M I AMI_OEM 7000528 MSFT 97)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffd0000
low ram: 00000000 - 1ffd0000
bootmap 00011000 - 00014ffc
(6 early reservations) ==> bootmem [0000000000 - 001ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 000063e214] TEXT DATA BSS ==> [0000100000 - 000063e214]
#2 [000063f000 - 0000642000] INIT_PG_TABLE ==> [000063f000 - 0000642000]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001ffd0
HighMem 0x0001ffd0 -> 0x0001ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffd0
On node 0 totalpages: 130911
free_area_init_node: node 0, pgdat c0560e40, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125936 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129887
Kernel command line: root=/dev/sda3 vga=795
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 1800.013 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513564k/524096k available (2964k kernel code, 9908k reserved, 1559k data, 352k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07d0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
.init : 0xc056e000 - 0xc05c6000 ( 352 kB)
.data : 0xc03e5242 - 0xc056b1d8 (1559 kB)
.text : 0xc0100000 - 0xc03e5242 (2964 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.02 BogoMIPS (lpj=1800013)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 320 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfebf7c00-0xfebf7cff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xfebf7800-0xfebf78ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xb0000000-0xbfffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xaff00000-0xcfefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - F5, should be E7 [20081204]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x295-0x296 has been reserved
system 00:09: ioport range 0x3e0-0x3e7 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x400-0x41f has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x1fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000aff00000-0x000000cfefffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0xfaa00000-0xfeafffff]
pci_bus 0000:01: resource 2 mem: [0xaff00000-0xcfefffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
microcode: CPU0: AMD CPU family 0xf not supported
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
vesafb: cannot reserve video memory at 0xb0000000
vesafb: framebuffer at 0xb0000000, mapped to 0xe0800000, using 10240k, total 524288k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:d3a0
vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 16 throttling states)
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1c000, 00:11:09:85:91:72, IRQ 23.
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
usbcore: registered new interface driver rt73usb
Linux video capture interface: v2.00
gspca: main v2.4.0 registered
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
Switched to high resolution mode on CPU 0
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
pata_via 0000:00:0f.1: version 0.3.3
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata3.00: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48
ata3.01: ATA-6: Maxtor 4D060H3, DAK019K0, max UDMA/100
ata3.01: 117231408 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Direct-Access ATA Maxtor 4D060H3 DAK0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:1:0: [sdb] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
ata4.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
sr 3:0:1:0: Attached scsi generic sg3 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebf7c00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 4
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
w83627hf: Found W83627THF chip at 0x290
w83627hf w83627hf.656: Reading VID from GPIO5
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-8: configuration #1 chosen from 1 choice
Advanced Linux Sound Architecture Driver Version 1.0.18a.
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (rt73usb): not using net_device_ops yet
usb 3-1: new low speed USB device using uhci_hcd and address 2
ALSA device list:
#0: VIA 8237 with ALC655 at 0xc400, irq 22
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 352k freed
usb 3-1: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input3
generic-usb 0003:1241:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.1-1/input0
input: USB Keyboard as /class/input/input4
generic-usb 0003:1241:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.1-1/input1
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: A4Tech USB Full Speed as /class/input/input5
generic-usb 0003:09DA:8090.0003: input: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input0
input: A4Tech USB Full Speed as /class/input/input6
generic-usb 0003:09DA:8090.0004: input: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:10.3-1/input1
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k
eth0: link down
rt73usb 1-8:1.0: firmware: requesting rt73.bin
wlan0: authenticate with AP 00:30:f1:aa:5a:26
wlan0: authenticated
wlan0: associate with AP 00:30:f1:aa:5a:26
wlan0: RX AssocResp from 00:30:f1:aa:5a:26 (capab=0x11 status=0 aid=1)
wlan0: associated
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs |
ausgabe von xorg:
| Quote: |
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux tux 2.6.29-gentoo #1 Sat Mar 28 19:51:30 CET 2009 i686
Build Date: 26 October 2008
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 28 22:09:46 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "PHILIPS 109E"
(**) | |-->Device "Geforce 6200"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e45c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0204 card 1106,0204 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1204 card 1106,1204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2204 card 1106,2204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3204 card 1106,3204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4204 card 1106,4204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7204 card 1106,7204 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1462,0320 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1462,0320 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1462,0320 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1462,0320 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1462,7020 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1462,0b10 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1462,c03c rev 78 class 02,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0221 card 1682,226a rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfaa00000 - 0xfeafffff (0x4100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xaff00000 - 0xcfefffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xfd000000/24, 0xb0000000/28, 0xfc000000/24, BIOS @ 0xfeae0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd1ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[1] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[4] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[9] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[10] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[16] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[18] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[1] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[4] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[9] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[10] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[16] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[17] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[18] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[15] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[22] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[23] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[24] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"(II) Module already built-in
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/extensions//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[15] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[22] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[23] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[24] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[25] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[27] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[28] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "DynamicTwinView" "0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.88
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): PHILIPS 109E5 (CRT-0)
(--) NVIDIA(0): PHILIPS 109E5 (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (90, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebf7800 - 0xfebf78ff (0x100) MX[B]
[5] -1 0 0xfebf7c00 - 0xfebf7cff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[19] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[25] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[26] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[27] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[28] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
|
lspci:
| Quote: | 00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1) |
lsusb:
| Quote: | Bus 005 Device 002: ID 09da:8090 A4 Tech Co., Ltd (fireglider mouse von sharkoon; btw: die wird von bios und xorg als einmal mouse und keyboard erkannt!!! sind das die 6 zusatztasten daran evtl.?)
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 002: ID 1241:1503 Belkin (saitek tastatur)
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 07d1:3c03 D-Link System (mein wlan-stick)
Bus 001 Device 001: ID 1d6b:0002 |
kernel-config:
| Quote: | #
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-gentoo
# Sat Mar 28 19:41:58 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda2"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EM |
|
| Back to top |
|
|
Tinitus
Veteran
Joined: 20 Sep 2004
Posts: 1754
|
| Posted: Sun Mar 29, 2009 9:47 am Post subject: Re: Probleme mit Nvidia-Karte |
|
|
Hallo,
habe hier ein 64bit System.
läuft ohne Probleme ..eigentlich besser als vorher (aber rein subjektiv)
aber:
| Code: | dmesg | grep nvidia
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
|
hat aber wie gesagt bei mir keine Auswirkungen. Intel Chipsatz mit Intel Onboard Grafkikkarte.
G. R. |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Sun Mar 29, 2009 10:17 am Post subject: |
|
|
Hm okay,
das muss es an etwas anderem liegen... Danke dir aber. Dann weiss ich das es das schonmal nicht ist...
*weitergruebel* |
|
| Back to top |
|
|
ChrisJumper
Advocate
Joined: 12 Mar 2005
Posts: 2400
Location: Germany
|
| Posted: Mon Mar 30, 2009 7:47 pm Post subject: |
|
|
Hi Chris,
schau dir mal an womit sich deine Karte den IRQ teilt.
| Code: | | $ cat /proc/interrupts |
Ich hab nach wenig suchen festgestellt das es "etwas" kompliziert ist die IRQ's per Hand zuzuweisen, da dies wohl schon als Kernel-Boot-Parameter von grub und Co. erfolgen müsste. Aber vielleicht hast du ja Glück und kannst einfach die doppelte Belegte PCI-Karte einfach auf einen anderen Platz verweisen.
Hast du da vielleicht eine Passiv gekühlte Karte? Achte mal genau, wann die Freezes auftreten. Ich hab mal ein ähnliche Symptom beobachtet. Immer beim DVDs schauen wurde die Grafikkarte wohl ein wenig zu heiß und es kam zu System Freezes. Probleme beim Kompilieren gab es aber nie. Seit dem ich einen zusätzlichen Gehäuselüfter hab, der genau auf die Grafikkarte pustet sind meine Freezes Verschwunden.
Grüße |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Wed Apr 15, 2009 11:25 am Post subject: |
|
|
| ChrisJumper wrote: |
schau dir mal an womit sich deine Karte den IRQ teilt.
| Code: | | $ cat /proc/interrupts |
Ich hab nach wenig suchen festgestellt das es "etwas" kompliziert ist die IRQ's per Hand zuzuweisen, da dies wohl schon als Kernel-Boot-Parameter von grub und Co. erfolgen müsste. Aber vielleicht hast du ja Glück und kannst einfach die doppelte Belegte PCI-Karte einfach auf einen anderen Platz verweisen. |
Ausgabe:
| Quote: | CPU0
0: 124 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
4: 2 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 81248 IO-APIC-edge pata_via
15: 0 IO-APIC-edge pata_via
16: 446838 IO-APIC-fasteoi nvidia
20: 0 IO-APIC-fasteoi sata_via
21: 429906 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
23: 0 IO-APIC-fasteoi eth0
NMI: 0 Non-maskable interrupts
LOC: 2074884 Local timer interrupts
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0 |
Irgendwie wird aber der IRC 16 nicht geteilt wie ich das sehe oder?
| ChrisJumper wrote: | | Hast du da vielleicht eine Passiv gekühlte Karte? Achte mal genau, wann die Freezes auftreten. Ich hab mal ein ähnliche Symptom beobachtet. Immer beim DVDs schauen wurde die Grafikkarte wohl ein wenig zu heiß und es kam zu System Freezes. Probleme beim Kompilieren gab es aber nie. Seit dem ich einen zusätzlichen Gehäuselüfter hab, der genau auf die Grafikkarte pustet sind meine Freezes Verschwunden. |
Naja, bin heute aus dem Urlaub gekommen - Rechner hochgefahren und in den ersten 4 Minuten gab es wieder einen freeze ?!
Heute habe ich 2 Stunden was gezockt und garnichts ist passiert... Sie ist passiv gekuehlt aber daran liegt es wohl nicht... Die Freezes sind unregelmäßig kann immer vorkommen...
Danke aber für deine Antwort. Hat noch jemand einen Tipp? |
|
| Back to top |
|
|
merlin2k
Tux's lil' helper
Joined: 24 Nov 2006
Posts: 126
Location: Hamburg, Germany
|
| Posted: Wed Apr 15, 2009 12:03 pm Post subject: |
|
|
Ich hatte ein ähnliches Problem (siehe hier).
Kannst ja mal vorrübergehend den nv Treiber probieren. Der hat zwar kein opengl aber wenn es mit dem läuft, weißt du das es am nvidia Treiber liegt und kannst ein downgrade machen.
Ich benutze auf dem Rechner jetzt seit mehreren Tagen die Version 177.82 der nvidia-drivers und alles läuft stabil. |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Wed Apr 15, 2009 6:09 pm Post subject: |
|
|
Habe jetzt nochmal ein update auf den neusten nvidia-treiber gemacht... Bis jetzt seit paar stunden keine freezes mehr... =)
By the Way ist es normal, dass die oben verlinkte karte mit glxgears nur 1300 FPS schafft?? :-/ Ist ne 6200 da habe ich ja schon von wesentlich schnelleren 5xern gehoert! |
|
| Back to top |
|
|
kriz
Apprentice
Joined: 22 Jan 2003
Posts: 231
|
| Posted: Thu Apr 16, 2009 2:54 am Post subject: |
|
|
glxgears ist auch eher "ob" opengl funktioniert,
einfach dein game testen und wenns "laeuft" is doch ok. |
|
| Back to top |
|
|
manuels
Advocate
Joined: 22 Nov 2003
Posts: 2146
Location: Europe
|
| Posted: Thu Apr 16, 2009 7:46 am Post subject: |
|
|
OT: hat hier noch jemand von euch Probleme mit der Darstellung des Threads.
Bei mir wird auf zwei Rechnern im FF 3.0 die Seite falsch dargestellt. Ebenso im Konqueror.
_________________
Build your own live cd with catalyst 2.0! |
|
| Back to top |
|
|
merlin2k
Tux's lil' helper
Joined: 24 Nov 2006
Posts: 126
Location: Hamburg, Germany
|
| Posted: Thu Apr 16, 2009 7:56 am Post subject: |
|
|
| manuels wrote: | OT: hat hier noch jemand von euch Probleme mit der Darstellung des Threads.
Bei mir wird auf zwei Rechnern im FF 3.0 die Seite falsch dargestellt. Ebenso im Konqueror. |
Bei mir auch. Alles klebt am rechten Fensterrand. |
|
| Back to top |
|
|
Chris2000
Tux's lil' helper
Joined: 04 Oct 2008
Posts: 100
Location: Aurich
|
| Posted: Thu Apr 16, 2009 2:02 pm Post subject: |
|
|
| Quote: | OT: hat hier noch jemand von euch Probleme mit der Darstellung des Threads.
Bei mir wird auf zwei Rechnern im FF 3.0 die Seite falsch dargestellt. Ebenso im Konqueror. |
Jo, das ist nen Fehler von phpBB der Forensoftware bzw. von HTML/Interpreter oder sonstwas... Wenn man nen zu langen Quote macht in nem Post dann gibt es Anzeigefehler... KA aber das Design ist ja nur mit Tabellen gemacht denke nicht das ne Tabellenzelle für so was _langes_ gemacht wurde 
Back to Topic:
Achso okay... Naja habe jetzt den neuen Nvidia-driver und nochmal den kernel 2.6.29-rc1 und siehe da klappt auf einmal seit gestern kein freeze mehr... Bin ich glücklich - danke für die Hilfe Thema ist damit gelöst. Und ja es ruckelt eigendlich überhaupt nichts... Nur hat es mich gewundert weil meine Geforce 5x Go im Laptop locker 2600 FPS mal macht  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
Deutsches Forum (German)
