| View previous topic :: View next topic |
| Author |
Message |
super_matrix
n00b
Joined: 05 Jun 2009
Posts: 4
|
 Posted: Fri Jun 05, 2009 9:57 pm Post subject: Problemi con l'installazione di Xorg |
 |
|
Salve a ragazzi... non riesco ad installare xorg sul mio notebbok HP NX6110; sto seguendo questa guida.
L'errore che ottengo quando lancio X -configure è:
| Code: | Gentoo_NX6110 / # X -configure
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-gentoo-r5 i686
Current Operating System: Linux Gentoo_NX6110 2.6.28-gentoo-r5 #1 SMP Thu May 28 00:28:59 CEST 2009 i686
Build Date: 05 June 2009 11:31:44PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 5 23:57:16 2009
Missing output drivers. Configuration failed.
|
mentre questo è il mio make.conf:
| Code: | # These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium-m -mtune=pentium-m -m32 -mfpmath=sse -O3 -fomit-frame-pointer -ftracer -fforce-addr -pipe -mno-3dnow -mmmx -msse -msse2 -mno-sse3"
CXXFLAGS="${CFLAGS} -fvisibility-inlines-hidden"
LDFLAGS="-Wl,-O1,--enable-new-dtags,--sort-common,-s"
ACCEPT_KEYWORDS="x86"
LANG="it_IT.utf8@euro"
LC_COLLATE="C"
LINGUAS="it en"
PORTAGE_TMPDIR=/var/tmp
PORTDIR=/usr/portage
DISTDIR=${PORTDIR}/distfiles
PKGDIR=${PORTDIR}/packages
PORTAGE_RSYNC_RETRIES="3"
GENTOO_MIRRORS="http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ "
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
RSYNC_EXCLUDEFROM="/etc/portage/rsync_excludes"
MAKEOPTS="-j2"
AUTOCLEAN="yes"
FEATURES="sandbox"
VIDEO_CARDS="i810"
ALSA_CARDS="intel8x0"
INPUT_DEVICES="keyboard mouse synaptics" |
con emerge -pvD xorg-server ottengo:
| Code: | Gentoo_NX6110 / # emerge -pvD xorg-server
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] virtual/acl-0 0 kB
[ebuild R ] x11-base/xorg-server-1.5.3-r6 USE="hal ipv6 nptl sdl xorg -3dfx -debug -dmx -kdrive -minimal -tslib" INPUT_DEVICES="keyboard mouse synaptics -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -tek4957 -tslib -ur98 -virtualbox -vmmouse -void -wacom" VIDEO_CARDS="-apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -via -virtualbox -vmware -voodoo -xgi" 0 kB
Total: 2 packages (1 new, 1 reinstall), Size of downloads: 0 kB
|
e infine con emerge portage-utils; qlist -I -C x11-drivers/ ottengo:
| Code: | ....
* GNU info directory index is up-to-date.
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-input-synaptics
|
e manca la scheda Video.... perché !!!!!!!!!!!!! |
|
| Back to top |
|
 |
cloc3
Advocate
Joined: 13 Jan 2004
Posts: 4815
Location: http://www.gentoo-users.org/user/cloc3/
|
| Posted: Sat Jun 06, 2009 4:59 am Post subject: Re: Problemi con l'installazione di Xorg |
|
|
| super_matrix wrote: |
VIDEO_CARDS="-apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -via -virtualbox -vmware -voodoo -xgi"
...
e manca la scheda Video.... perché !!!!!!!!!!!!! |
in effetti, sembra che tu non abbia scelto alcuna scheda video.
fai attenzione a tenere d'occhio, oltre alla guida che hai già indicato, anche questa.
_________________
vu vu vu
gentù
mi piaci tu |
|
| Back to top |
|
|
super_matrix
n00b
Joined: 05 Jun 2009
Posts: 4
|
| Posted: Sat Jun 06, 2009 9:52 pm Post subject: |
|
|
Trovato l'errore, nel make.conf c'era
mentre ora con
| Code: | | VIDEO_CARDS="intel" |
sono ad un passo successivo...ma ho sempre un errore: quando eseguo X -config /root/xorg.conf.new ottengo questo msg di errore e non so come muovermi:
| Code: | Gentoo_NX6110 ~ # X -config /root/xorg.conf.new
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-gentoo-r5 i686
Current Operating System: Linux Gentoo_NX6110 2.6.28-gentoo-r5 #1 SMP Thu May 28 00:28:59 CEST 2009 i686
Build Date: 06 June 2009 12:08:42AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 6 23:50:41 2009
(++) Using config file: "/root/xorg.conf.new"
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
FATAL: Module i915 not found.
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
(EE) intel(0): Couldn't allocate video memory
Fatal server error:
AddScreen/ScreenInit failed for driver 0
|
In cosa sbaglio ???? |
|
| Back to top |
|
|
Peach
Advocate
Joined: 08 Mar 2003
Posts: 3686
Location: London, UK
|
| Posted: Sat Jun 06, 2009 10:02 pm Post subject: |
|
|
| super_matrix wrote: | | Code: | (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
FATAL: Module i915 not found. |
|
sembra ti manchi il supporto per il l'agp del tuo chipset.
controlla di avere abilitato i moduli necessari nel kernel
(se hai già controllato o se ti servono più info domanda pure)
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom |
|
| Back to top |
|
|
!equilibrium
Bodhisattva
Joined: 06 Jun 2004
Posts: 2109
Location: MI/BG/LC
|
|
| Back to top |
|
|
super_matrix
n00b
Joined: 05 Jun 2009
Posts: 4
|
| Posted: Sun Jun 07, 2009 9:00 am Post subject: |
|
|
Ho effettuato un lspci e questo è il risultato:
| Code: | Gentoo_NX6110 ~ # lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
|
mentre il kernel l'ho compilato alla fine con genkernel... ogni volta che provavo a fare le configurazioni "a mano" non mi partiva nulla  |
|
| Back to top |
|
|
Peach
Advocate
Joined: 08 Mar 2003
Posts: 3686
Location: London, UK
|
| Posted: Sun Jun 07, 2009 12:35 pm Post subject: |
|
|
bene
l'idea di genkernel è quella di avere una base funzionante e poi effettuare gli aggiustamenti a manina
io direi che potresti partire seguendo il suggerimento di equi e seguire la guida a DRI (anche in italiano)
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
