[solved] emerge -uDN world=everything related to hal died

[optiluca]

Hi. I just did a big emerge -uDN world and amongst other things, hal was updated to the latest ~amd64 release (0.5.12_rc1-r6). After reboot, I have no wireless (wicd), bluetooth (blueman) and keyboard/USB mouse under X (evdev). My trackpad works, however. I've had similar issues in the past and usually downgrading hal fixed the issue (and I would usually find that at the next sync the hal release would have been masked by upstream too), but after downgrading to -r4 the issue remains. I also tried a downgrade to 0.5.11-r9, with no luck. As I also updated to gentoo-sources-2.6.30-r1 I tried running both those and my old kernel but it does not seem to make a difference.

I don't have a clue how to fix this as I think I tried all the obvious solutions, and my system is totally unusable in its current state, so here I am asking for help to the great and wise gentoo community

Any ideas?

Thanks in advance
_________________
# "Hmm, sounds like your system froze up."
# "I don't know why. It's about 80 degrees in here!"

http://www.rinkworks.com/stupid/cs_mincing.shtml

[honp]

At first you can do revdep-rebuild and the next step try to emerge xorg drivers. qlist -I -C x11-drivers/

[optiluca]

Ok so I ran revdep-rebuild and nothing broken was found. I then rebuilt all drivers as you suggested and after a reboot I can say that the keyboard works. I also rebuild blueman, and bluetooth seems to also function correctly now. However, despite the fact I also rebuild wicd, wireless still fails to work... As X is usable now I can easily provide more information in the form of logs/configs, so if you need anything, just ask

Thanks for your assistance

PS The USB mouse also did not seem to work, but unplugging and replugging it in seems to make it work just fine....
_________________
# "Hmm, sounds like your system froze up."
# "I don't know why. It's about 80 degrees in here!"

http://www.rinkworks.com/stupid/cs_mincing.shtml

[honp]

So, provide /var/log/messages and /var/log/Xorg.0.log after your X starts and maybe lsmod too.

[optiluca]

[optiluca]

Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.739208] Monitor-Mwait will be used to enter C-2 state
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.739218] Marking TSC unstable due to TSC halts in idle
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.739298] ACPI: CPU0 (power states: C1[C1] C2[C2])
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.739397] processor ACPI_CPU:00: registered as cooling_device1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.739444] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.740128] ACPI: SSDT 00000000bfd7ce18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.740756] ACPI: SSDT 00000000bfd7df18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.741671] ACPI: CPU1 (power states: C1[C1] C2[C2])
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.742795] processor ACPI_CPU:01: registered as cooling_device2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.743887] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.882409] thermal LNXTHERM:01: registered as thermal_zone0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.883554] ACPI: Thermal Zone [TZ01] (51 C)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.884872] [drm] Initialized drm 1.1.0 20060810
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.886161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.889935] brd: module loaded
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.892236] loop: module loaded
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.893646] input: Macintosh mouse button emulation as /devices/virtual/input/input5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.895121] Loading iSCSI transport class v2.0-870.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.896803] Driver 'sd' needs updating - please use bus_type methods
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.898256] Driver 'sr' needs updating - please use bus_type methods
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.899811] ahci 0000:00:1f.2: version 3.0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.899832] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.901336] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.901382] ahci: SSS flag set, parallel bus scan disabled
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.902877] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.904403] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.905968] ahci 0000:00:1f.2: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.909169] scsi0 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.910923] scsi1 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.912650] scsi2 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.914351] scsi3 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.915986] scsi4 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.917596] scsi5 : ahci
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.919438] ata1: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305100 irq 29
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.920935] ata2: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305180 irq 29
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.922412] ata3: DUMMY
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.923857] ata4: DUMMY
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.925267] ata5: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305300 irq 29
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.926686] ata6: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305380 irq 29
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.928081] work_for_cpu used greatest stack depth: 5176 bytes left
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.929798] Atheros(R) L2 Ethernet Driver - version 2.2.3
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.931147] Copyright (c) 2007 Atheros Corporation.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.932575] ATL1E 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.933932] ATL1E 0000:05:00.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.945392] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.946722] e100: Copyright(c) 1999-2006 Intel Corporation
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.948213] PPP generic driver version 2.4.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.949654] PPP Deflate Compression module registered
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.950976] PPP BSD Compression module registered
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.952479] PPP MPPE Compression module registered
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.953797] NET: Registered protocol family 24
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.955134] PPPoL2TP kernel driver, V1.0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.956480] console [netcon0] enabled
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.957778] netconsole: network logging started
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.959257] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.960560] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.960611] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.961931] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.961936] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.963300] drivers/usb/core/inode.c: creating file 'devices'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.963305] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.963367] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.964687] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.964692] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.964719] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.968600] ehci_hcd 0000:00:1a.7: debug port 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.969900] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.969902] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.969917] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xdb305c00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.971217] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.975090] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.981011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.982325] usb usb1: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.982333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.983617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.984900] usb usb1: Product: EHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.986172] usb usb1: Manufacturer: Linux 2.6.30-gentoo-r1 ehci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.987430] usb usb1: SerialNumber: 0000:00:1a.7
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.988746] usb usb1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.988790] usb usb1: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.988793] usb usb1: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.990063] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.990080] usb 1-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.990123] hub 1-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.990125] hub 1-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.990128] hub 1-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.991374] hub 1-0:1.0: 4 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992596] hub 1-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992598] hub 1-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992600] hub 1-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992602] hub 1-0:1.0: power on to power good time: 20ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992608] hub 1-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992611] hub 1-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992734] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.992801] work_for_cpu used greatest stack depth: 4248 bytes left
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.994074] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.995312] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.995316] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.996603] drivers/usb/core/inode.c: creating file '002'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.996672] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.997944] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.997949] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
Jun 19 00:23:06 optilaptop-gentoo-acer [ 1.997969] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.001864] ehci_hcd 0000:00:1d.7: debug port 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.003146] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.003148] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.003162] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdb305800
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.004451] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.008326] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.014012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.015346] usb usb2: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.015353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.016642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.017972] usb usb2: Product: EHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.019279] usb usb2: Manufacturer: Linux 2.6.30-gentoo-r1 ehci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.020616] usb usb2: SerialNumber: 0000:00:1d.7
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.021960] usb usb2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.022009] usb usb2: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.022012] usb usb2: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.023343] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.023360] usb 2-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.023402] hub 2-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.023404] hub 2-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.023406] hub 2-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.024714] hub 2-0:1.0: 8 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.025996] hub 2-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.025998] hub 2-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.025999] hub 2-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.026007] hub 2-0:1.0: power on to power good time: 20ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.026012] hub 2-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.026014] hub 2-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.026101] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.026219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.027519] ohci_hcd: block sizes: ed 80 td 96
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.027570] uhci_hcd: USB Universal Host Controller Interface driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.028983] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.030304] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.030308] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.031649] drivers/usb/core/inode.c: creating file '003'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.031715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.033058] uhci_hcd 0000:00:1a.0: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.034352] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.034354] uhci_hcd 0000:00:1a.0: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.034380] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000070e0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.035696] usb usb3: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.035703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.037071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.038381] usb usb3: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.039741] usb usb3: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.041041] usb usb3: SerialNumber: 0000:00:1a.0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.042453] usb usb3: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.042495] usb usb3: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.042498] usb usb3: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.043797] usb usb3: adding 3-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.043817] usb 3-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.043859] hub 3-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.043861] hub 3-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.043864] hub 3-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.045220] hub 3-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046528] hub 3-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046530] hub 3-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046532] hub 3-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046535] hub 3-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046540] hub 3-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046542] hub 3-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046608] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.046726] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.048042] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.048046] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.049445] drivers/usb/core/inode.c: creating file '004'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.049506] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.050834] uhci_hcd 0000:00:1a.1: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.052224] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.052227] uhci_hcd 0000:00:1a.1: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.052246] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.053586] usb usb4: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.053593] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.054944] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.056261] usb usb4: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.057555] usb usb4: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.058863] usb usb4: SerialNumber: 0000:00:1a.1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.060196] usb usb4: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.060242] usb usb4: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.060245] usb usb4: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.061546] usb usb4: adding 4-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.061563] usb 4-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.061605] hub 4-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.061607] hub 4-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.061610] hub 4-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.062905] hub 4-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064181] hub 4-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064183] hub 4-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064185] hub 4-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064187] hub 4-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064192] hub 4-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064194] hub 4-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064259] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.064383] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.065677] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.065681] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.067017] drivers/usb/core/inode.c: creating file '005'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.067083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.068393] uhci_hcd 0000:00:1d.0: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.069674] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.069676] uhci_hcd 0000:00:1d.0: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.069691] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.069697] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.071036] usb usb5: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.071043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.072357] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.073675] usb usb5: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.074975] usb usb5: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.076281] usb usb5: SerialNumber: 0000:00:1d.0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.077615] usb usb5: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.077658] usb usb5: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.077660] usb usb5: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.078945] usb usb5: adding 5-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.078961] usb 5-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.079012] hub 5-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.079015] hub 5-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.079017] hub 5-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.080301] hub 5-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081567] hub 5-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081569] hub 5-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081571] hub 5-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081573] hub 5-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081578] hub 5-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081580] hub 5-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081646] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.081760] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.083087] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.083091] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.084447] drivers/usb/core/inode.c: creating file '006'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.084509] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.085831] uhci_hcd 0000:00:1d.1: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.087133] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.087135] uhci_hcd 0000:00:1d.1: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.087150] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.087163] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.088475] usb usb6: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.088482] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.089778] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.091078] usb usb6: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.092374] usb usb6: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.093674] usb usb6: SerialNumber: 0000:00:1d.1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.094999] usb usb6: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.095025] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.095029] hub 1-0:1.0: port 1: status 0501 change 0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.095048] usb usb6: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.095050] usb usb6: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.096343] usb usb6: adding 6-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.096360] usb 6-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.096401] hub 6-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.096404] hub 6-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.096406] hub 6-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.097688] hub 6-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098940] hub 6-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098942] hub 6-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098944] hub 6-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098946] hub 6-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098950] hub 6-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.098953] hub 6-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.099021] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.099136] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.100461] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.100465] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.101810] drivers/usb/core/inode.c: creating file '007'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.101883] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.103218] uhci_hcd 0000:00:1d.2: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.104525] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.104527] uhci_hcd 0000:00:1d.2: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.104542] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.104548] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00007060
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.105877] usb usb7: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.105884] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.107182] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.108494] usb usb7: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.109799] usb usb7: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.111103] usb usb7: SerialNumber: 0000:00:1d.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.112455] usb usb7: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.112496] usb usb7: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.112499] usb usb7: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.113796] usb usb7: adding 7-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.113816] usb 7-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.113860] hub 7-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.113862] hub 7-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.113864] hub 7-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.115162] hub 7-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116437] hub 7-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116439] hub 7-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116441] hub 7-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116443] hub 7-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116448] hub 7-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116450] hub 7-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116516] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.116626] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.117952] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.117955] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.119315] drivers/usb/core/inode.c: creating file '008'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.119386] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.120729] uhci_hcd 0000:00:1d.3: detected 2 ports
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.122033] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.122035] uhci_hcd 0000:00:1d.3: Performing full reset
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.122062] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00007040
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.123395] usb usb8: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.123403] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.124698] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.126009] usb usb8: Product: UHCI Host Controller
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.127312] usb usb8: Manufacturer: Linux 2.6.30-gentoo-r1 uhci_hcd
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.128628] usb usb8: SerialNumber: 0000:00:1d.3
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.129971] usb usb8: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.129997] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001030 POWER sig=se0 OCC OC
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.130012] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.130015] hub 2-0:1.0: port 6: status 0501 change 0001
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.130031] usb usb8: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.130033] usb usb8: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.131331] usb usb8: adding 8-0:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.131348] usb 8-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.131389] hub 8-0:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.131392] hub 8-0:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.131394] hub 8-0:1.0: USB hub found
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.132684] hub 8-0:1.0: 2 ports detected
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133961] hub 8-0:1.0: standalone hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133963] hub 8-0:1.0: no power switching (usb 1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133965] hub 8-0:1.0: individual port over-current protection
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133968] hub 8-0:1.0: power on to power good time: 2ms
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133972] hub 8-0:1.0: local power source is good
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.133975] hub 8-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.134047] drivers/usb/core/inode.c: creating file '001'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.134227] usbcore: registered new interface driver usblp
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.135523] Initializing USB Mass Storage driver...
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.136891] usbcore: registered new interface driver usb-storage
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.138213] USB Mass Storage support registered.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.139597] usbcore: registered new interface driver libusual
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.141015] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.175580] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.175610] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.215396] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.216725] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.217015] uhci_hcd 0000:00:1d.2: port 1 portsc 0c80,00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.217023] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.218099] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.218104] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.218111] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.218251] mice: PS/2 mouse device common for all mice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.220052] rtc_cmos 00:03: RTC can wake from S4
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.221453] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.222805] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.224191] i2c /dev entries driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.225664] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.227274] Linux video capture interface: v2.00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.228777] usbcore: registered new interface driver uvcvideo
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.230162] USB Video Class driver (v0.1.0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.235610] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.237102] Bluetooth: Virtual HCI driver ver 1.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.238554] Bluetooth: HCI UART driver ver 2.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.239949] Bluetooth: HCI H4 protocol initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.241372] Bluetooth: HCI BCSP protocol initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.242744] Bluetooth: HCILL protocol initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.244134] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.245561] usbcore: registered new interface driver bcm203x
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.246936] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.248369] usbcore: registered new interface driver bpa10x
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.249759] Bluetooth: BlueFRITZ! USB driver ver 1.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.251206] usbcore: registered new interface driver bfusb
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.252757] Bluetooth: Generic Bluetooth USB driver ver 0.5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.254197] usbcore: registered new interface driver btusb
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.255921] cpuidle: using governor ladder
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.257791] cpuidle: using governor menu
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.259152] No iBFT detected.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.261587] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.263348] usbcore: registered new interface driver hiddev
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.264853] usbcore: registered new interface driver usbhid
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.266239] usbhid: v2.6:USB HID core driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.267681] Netfilter messages via NETLINK v0.30.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.269068] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.270750] ehci_hcd 0000:00:1a.7: port 1 high speed
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.270756] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.271042] ctnetlink v0.93: registering with nfnetlink.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.273058] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.274499] TCP cubic registered
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.275874] Initializing XFRM netlink socket
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.277577] NET: Registered protocol family 10
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.280134] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.281552] IPv6 over IPv4 tunneling driver
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.283628] NET: Registered protocol family 17
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.284975] Bluetooth: L2CAP ver 2.13
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.286295] Bluetooth: L2CAP socket layer initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.287630] Bluetooth: SCO (Voice Link) ver 0.6
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.288966] Bluetooth: SCO socket layer initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.290318] Bluetooth: RFCOMM socket layer initialized
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.291610] Bluetooth: RFCOMM ver 1.11
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.292933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.294288] Bluetooth: BNEP filters: protocol multicast
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.295606] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.297175] RPC: Registered udp transport module.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.298419] RPC: Registered tcp transport module.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.299647] lib80211: common routines for IEEE802.11 drivers
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.300902] lib80211_crypt: registered algorithm 'NULL'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.301895] PM: Checking image partition /dev/sda6
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.323512] usb 1-1: new high speed USB device using ehci_hcd and address 2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.376254] ehci_hcd 0000:00:1a.7: port 1 high speed
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.376259] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.396061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.398298] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.399633] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.402610] ata1.00: configured for UDMA/133
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.506035] usb 1-1: skipped 1 descriptor after configuration
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.506039] usb 1-1: skipped 6 descriptors after interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.506042] usb 1-1: skipped 1 descriptor after endpoint
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.506045] usb 1-1: skipped 20 descriptors after interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.506785] usb 1-1: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.517159] usb 1-1: New USB device found, idVendor=064e, idProduct=a117
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.518470] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.519761] usb 1-1: Product: Acer HD Crystal Eye webcam
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.521071] usb 1-1: Manufacturer: SuYin
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.522364] usb 1-1: SerialNumber: CN1014-S36B-OV01-VA-R03.00.00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.523706] usb 1-1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.523775] usb 1-1: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.523778] usb 1-1: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.525408] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.528293] usb 1-1:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.528400] uvcvideo 1-1:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.528405] uvcvideo 1-1:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.528427] uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye webcam (064e:a117)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.538666] input: Acer HD Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540095] usb 1-1: link qh4-0001/ffff8800bf800140 start 3 [1/0 us]
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540194] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540217] usb 1-1:1.1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540283] drivers/usb/core/inode.c: creating file '002'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540376] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540382] hub 2-0:1.0: state 7 ports 8 chg 0040 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540390] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.540398] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591039] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591064] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591071] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591077] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591088] uhci_hcd 0000:00:1d.2: port 1 portsc 0c80,00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.591093] hub 7-0:1.0: over-current change on port 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.592487] hub 7-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.693051] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0060
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.693063] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001030 POWER sig=se0 OCC OC
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.693068] hub 2-0:1.0: over-current change on port 5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.694421] hub 2-0:1.0: trying to enable port power on non-switchable hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.795032] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.795039] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.795046] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
Jun 19 00:23:06 optilaptop-gentoo-acer [ 2.900079] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.002041] usb 7-2: new low speed USB device using uhci_hcd and address 2
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.180942] usb 7-2: skipped 1 descriptor after interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.189937] usb 7-2: default language 0x0409
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.204049] usb usb4: suspend_rh (auto-stop)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.204075] usb usb5: suspend_rh (auto-stop)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.204100] usb usb6: suspend_rh (auto-stop)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.204125] usb usb8: suspend_rh (auto-stop)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.227648] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.234939] usb 7-2: New USB device found, idVendor=04ca, idProduct=0030
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.236313] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.237677] usb 7-2: Product: USB Mouse
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.239041] usb 7-2: Manufacturer: Lite-On Technology Corp.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.240446] usb 7-2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.242715] usb 7-2: usb_probe_device
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.242717] usb 7-2: configuration #1 chosen from 1 choice
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.248944] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.248972] usb 7-2:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.249080] usbhid 7-2:1.0: usb_probe_interface
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.249082] usbhid 7-2:1.0: usb_probe_interface - got id
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.282841] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.283242] input: Lite-On Technology Corp. USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input10
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.283417] generic-usb 0003:04CA:0030.0001: input,hidraw0: USB HID v1.10 Mouse [Lite-On Technology Corp. USB Mouse] on usb-0000:00:1d.2-2/input0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.283491] drivers/usb/core/inode.c: creating file '002'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.454040] usb usb3: suspend_rh (auto-stop)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.738228] ACPI: Battery Slot [BAT0] (battery present)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.739901] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.741692] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.743219] sd 0:0:0:0: [sda] Write Protect is off
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.744701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.744729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.746355] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.768140] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Jun 19 00:23:06 optilaptop-gentoo-acer [ 3.809641] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.623059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.638659] ata2.00: ATAPI: Slimtype DVD A DS8A2S, 6A11, max UDMA/100
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.655462] ata2.00: configured for UDMA/100
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.674991] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6A11 PQ: 0 ANSI: 5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.686431] sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.688135] Uniform CD-ROM driver Revision: 3.20
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.689981] sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.690108] sr 1:0:0:0: Attached scsi generic sg1 type 5
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701149] hub 4-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701155] usb usb4: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701158] usb usb4: suspend_rh
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701174] hub 5-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701178] usb usb5: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.701180] usb usb5: suspend_rh
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704047] hub 6-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704055] usb usb6: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704058] usb usb6: suspend_rh
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704077] hub 8-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704083] usb usb8: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704086] usb usb8: suspend_rh
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704103] hub 3-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704109] usb usb3: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.704113] usb usb3: suspend_rh
Jun 19 00:23:06 optilaptop-gentoo-acer [ 4.996047] ata5: SATA link down (SStatus 0 SControl 300)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.313045] ata6: SATA link down (SStatus 0 SControl 300)
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.325073] PM: Resume from partition 8:6
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.325076] PM: Checking hibernation image.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.325273] PM: Resume from disk failed.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.325298] registered taskstats version 1
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.327133] Magic number: 13:246:355
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.328750] input event1: hash matches
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.330503] md: Waiting for all devices to be available before autodetect
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.332113] md: If you don't use raid, use raid=noautodetect
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.333931] md: Autodetecting RAID arrays.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.335538] md: Scanned 0 and added 0 devices.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.337161] md: autorun ...
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.338780] md: ... autorun DONE.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.363154] kjournald starting. Commit interval 5 seconds
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.364773] EXT3-fs: mounted filesystem with ordered data mode.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.366382] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.368019] Freeing unused kernel memory: 736k freed
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.369827] Write protecting the kernel read-only data: 8380k
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.704067] hub 2-0:1.0: hub_suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.704078] usb usb2: bus auto-suspend
Jun 19 00:23:06 optilaptop-gentoo-acer [ 5.704082] ehci_hcd 0000:00:1d.7: suspend root hub
Jun 19 00:23:06 optilaptop-gentoo-acer [ 6.739234] init-early.sh used greatest stack depth: 3584 bytes left
Jun 19 00:23:06 optilaptop-gentoo-acer [ 9.394226] udev: starting version 141
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.128866] usb usb3: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.128889] usb 3-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129006] usb usb4: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129028] usb 4-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129147] usb usb1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129168] usb 1-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129211] usb 1-1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129233] usb 1-1:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129345] usb 1-1:1.1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129923] usb usb5: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.129944] usb 5-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130052] usb usb6: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130075] usb 6-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130194] usb usb7: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130215] usb 7-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130258] usb 7-2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130280] usb 7-2:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130518] usb usb8: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130539] usb 8-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130649] usb usb2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.130671] usb 2-0:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.278265] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.278268] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.281934] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.281965] iwlagn 0000:04:00.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.282093] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.299264] usb 1-1:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.299378] usb 1-1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.300992] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.301092] iwlagn 0000:04:00.0: irq 30 for MSI/MSI-X
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.302794] usb 1-1:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.302897] usb 1-1: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.303767] usb 7-2:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.303879] usb 7-2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.307410] usb 7-2:1.0: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.307515] usb 7-2: uevent
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.311604] phy0: Selected rate control algorithm 'iwl-agn-rs'
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.921595] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 19 00:23:06 optilaptop-gentoo-acer [ 10.921659] HDA Intel 0000:00:1b.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.085908] nvidia: module license 'NVIDIA' taints kernel.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.085913] Disabling lock debugging due to kernel taint
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.344352] nvidia 0000:01:00.0: power state changed by ACPI to D0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.344373] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.344389] nvidia 0000:01:00.0: setting latency timer to 64
Jun 19 00:23:06 optilaptop-gentoo-acer [ 11.345605] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.60 Mon May 11 15:27:42 PDT 2009
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788741] vboxdrv: Trying to deactivate the NMI watchdog permanently...
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788745] vboxdrv: Successfully done.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788747] vboxdrv: Found 2 processor cores.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788830] VBoxDrv: dbg - g_abExecMemory=ffffffffa089c0a0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788863] vboxdrv: fAsync=0 offMin=0x1b8 offMax=0x1162
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788919] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.788921] vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.824139] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0a37be0
Jun 19 00:23:06 optilaptop-gentoo-acer [ 12.824158] vboxnet0 (): not using net_device_ops yet
Jun 19 00:23:06 optilaptop-gentoo-acer [ 13.194395] EXT3 FS on sda7, internal journal
Jun 19 00:23:06 optilaptop-gentoo-acer [ 14.100568] Adding 2008084k swap on /dev/sda6. Priority:-1 extents:1 across:2008084k
Jun 19 00:23:06 optilaptop-gentoo-acer acpid: 4 rules loaded
Jun 19 00:23:06 optilaptop-gentoo-acer acpid: waiting for events: event logging is off
Jun 19 00:23:10 optilaptop-gentoo-acer [ 21.127000] tr used greatest stack depth: 3072 bytes left
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873250] usb usb3: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873312] usb 3-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873588] usb usb4: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873651] usb 4-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873921] usb usb1: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.873979] usb 1-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.874081] usb 1-1: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.874152] usb 1-1:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.874482] usb 1-1:1.1: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.876616] usb usb5: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.876674] usb 5-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.876944] usb usb6: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.877004] usb 6-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.877285] usb usb7: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.877346] usb 7-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.877448] usb 7-2: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.877506] usb 7-2:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.878173] usb usb8: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.878231] usb 8-0:1.0: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.878502] usb usb2: uevent
Jun 19 00:23:11 optilaptop-gentoo-acer [ 21.878558] usb 2-0:1.0: uevent
Jun 19 00:23:12 optilaptop-gentoo-acer /etc/init.d/laptop_mode[5648]: laptop_mode: waiting for hald
Jun 19 00:23:12 optilaptop-gentoo-acer /etc/init.d/local[5651]: local: waiting for hald
Jun 19 00:23:12 optilaptop-gentoo-acer /etc/init.d/xdm[5645]: xdm: waiting for hald
Jun 19 00:23:13 optilaptop-gentoo-acer acpid: client connected from 5962[103:1005]
Jun 19 00:23:13 optilaptop-gentoo-acer acpid: 1 client rule loaded
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.015956] usb usb2: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.015961] ehci_hcd 0000:00:1d.7: resume root hub
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.056663] hub 2-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.056907] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.080944] usb usb3: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.080948] usb usb3: wakeup_rh
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.112152] hub 3-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.112362] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.113923] usb usb4: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.113926] usb usb4: wakeup_rh
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.145040] hub 4-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.145346] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.146634] usb usb5: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.146638] usb usb5: wakeup_rh
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.182025] hub 5-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.182394] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.184223] usb usb6: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.184227] usb usb6: wakeup_rh
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.216052] hub 6-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.216103] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.219141] usb usb8: usb resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.219145] usb usb8: wakeup_rh
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.251052] hub 8-0:1.0: hub_resume
Jun 19 00:23:14 optilaptop-gentoo-acer [ 25.251101] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:15 optilaptop-gentoo-acer [ 26.204042] usb usb3: suspend_rh (auto-stop)
Jun 19 00:23:15 optilaptop-gentoo-acer [ 26.204073] usb usb5: suspend_rh (auto-stop)
Jun 19 00:23:15 optilaptop-gentoo-acer [ 26.204077] usb usb4: suspend_rh (auto-stop)
Jun 19 00:23:15 optilaptop-gentoo-acer [ 26.454029] usb usb6: suspend_rh (auto-stop)
Jun 19 00:23:15 optilaptop-gentoo-acer [ 26.454055] usb usb8: suspend_rh (auto-stop)
Jun 19 00:23:15 optilaptop-gentoo-acer acpid: client connected from 6061[0:0]
Jun 19 00:23:15 optilaptop-gentoo-acer acpid: 1 client rule loaded
Jun 19 00:23:16 optilaptop-gentoo-acer [ 27.323438] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.701187] usb 1-1: unlink qh4-0001/ffff8800bf800140 start 3 [1/0 us]
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.701266] usb 1-1: usb auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712170] hub 2-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712175] usb usb2: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712177] ehci_hcd 0000:00:1d.7: suspend root hub
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712242] hub 3-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712245] usb usb3: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712248] usb usb3: suspend_rh
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712274] hub 4-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712277] usb usb4: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712279] usb usb4: suspend_rh
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712304] hub 5-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712307] usb usb5: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712309] usb usb5: suspend_rh
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712335] hub 6-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712338] usb usb6: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712340] usb usb6: suspend_rh
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712365] hub 8-0:1.0: hub_suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712368] usb usb8: bus auto-suspend
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.712370] usb usb8: suspend_rh
Jun 19 00:23:17 optilaptop-gentoo-acer [ 27.716755] usb 7-2: usb auto-suspend
Jun 19 00:23:19 optilaptop-gentoo-acer acpid: client connected from 6061[0:0]
Jun 19 00:23:19 optilaptop-gentoo-acer acpid: 1 client rule loaded
Jun 19 00:23:19 optilaptop-gentoo-acer [ 30.500086] Clocksource tsc unstable (delta = -279983029 ns)
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701101] hub 1-0:1.0: hub_suspend
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701114] usb usb1: bus auto-suspend
Jun
_________________
# "Hmm, sounds like your system froze up."
# "I don't know why. It's about 80 degrees in here!"

http://www.rinkworks.com/stupid/cs_mincing.shtml

[optiluca]

Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701118] ehci_hcd 0000:00:1a.7: suspend root hub
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701153] hub 7-0:1.0: hub_suspend
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701159] usb usb7: bus auto-suspend
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.701163] usb usb7: suspend_rh
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.998096] usb usb7: usb auto-resume
Jun 19 00:23:20 optilaptop-gentoo-acer [ 30.998104] usb usb7: wakeup_rh
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.030095] hub 7-0:1.0: hub_resume
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.030119] hub 7-0:1.0: port 2: status 0307 change 0000
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.030142] usb 7-2: usb auto-resume
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.030153] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.056110] uhci_hcd 0000:00:1d.2: port 2 portsc 0195,01
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.067097] usb 7-2: finish resume
Jun 19 00:23:20 optilaptop-gentoo-acer [ 31.077160] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:23:23 optilaptop-gentoo-acer [ 33.702238] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:23:23 optilaptop-gentoo-acer [ 33.706240] usb 7-2: usb auto-suspend
Jun 19 00:23:26 optilaptop-gentoo-acer [ 36.701109] hub 7-0:1.0: hub_suspend
Jun 19 00:23:26 optilaptop-gentoo-acer [ 36.701123] usb usb7: bus auto-suspend
Jun 19 00:23:26 optilaptop-gentoo-acer [ 36.701139] usb usb7: suspend_rh
Jun 19 00:24:14 optilaptop-gentoo-acer kdm: :0[6125]: pam_unix(kde:session): session opened for user luca by (uid=0)
Jun 19 00:24:50 optilaptop-gentoo-acer python: hp-systray[6333]: error: option -s not recognized
Jun 19 00:24:59 optilaptop-gentoo-acer su[6360]: Successful su for root by luca
Jun 19 00:24:59 optilaptop-gentoo-acer su[6360]: + /dev/pts/0 luca:root
Jun 19 00:24:59 optilaptop-gentoo-acer su[6360]: pam_unix(su:session): session opened for user root by luca(uid=1000)
Jun 19 00:25:12 optilaptop-gentoo-acer su[6406]: Successful su for root by luca
Jun 19 00:25:12 optilaptop-gentoo-acer su[6406]: + /dev/pts/3 luca:root
Jun 19 00:25:12 optilaptop-gentoo-acer su[6406]: pam_unix(su:session): session opened for user root by (uid=1000)
Jun 19 00:25:12 optilaptop-gentoo-acer su[6406]: pam_unix(su:session): session closed for user root
Jun 19 00:25:12 optilaptop-gentoo-acer su[6411]: Successful su for root by luca
Jun 19 00:25:12 optilaptop-gentoo-acer su[6411]: + /dev/pts/3 luca:root
Jun 19 00:25:12 optilaptop-gentoo-acer su[6411]: pam_unix(su:session): session opened for user root by (uid=1000)
Jun 19 00:25:12 optilaptop-gentoo-acer su[6411]: pam_unix(su:session): session closed for user root
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.266314] usb usb1: usb auto-resume
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.266319] ehci_hcd 0000:00:1a.7: resume root hub
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.286056] hub 1-0:1.0: hub_resume
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.286075] hub 1-0:1.0: port 1: status 0507 change 0000
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.286105] usb 1-1: usb auto-resume
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.286116] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.312238] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.323142] usb 1-1: finish resume
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.324768] usb 1-1: disable remote wakeup, status -32
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.324793] ehci_hcd 0000:00:1a.7: reused qh ffff8800bf800140 schedule
Jun 19 00:25:16 optilaptop-gentoo-acer [ 147.324799] usb 1-1: link qh4-0001/ffff8800bf800140 start 3 [1/0 us]
Jun 19 00:25:19 optilaptop-gentoo-acer [ 149.705166] usb 1-1: unlink qh4-0001/ffff8800bf800140 start 3 [1/0 us]
Jun 19 00:25:19 optilaptop-gentoo-acer [ 149.705255] usb 1-1: usb auto-suspend
Jun 19 00:25:22 optilaptop-gentoo-acer [ 152.704045] hub 1-0:1.0: hub_suspend
Jun 19 00:25:22 optilaptop-gentoo-acer [ 152.704056] usb usb1: bus auto-suspend
Jun 19 00:25:22 optilaptop-gentoo-acer [ 152.704059] ehci_hcd 0000:00:1a.7: suspend root hub
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.083851] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.367059] iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.496760] Registered led device: iwl-phy0::radio
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.496796] Registered led device: iwl-phy0::assoc
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.496831] Registered led device: iwl-phy0::RX
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.496850] Registered led device: iwl-phy0::TX
Jun 19 00:25:24 optilaptop-gentoo-acer [ 155.502990] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun 19 00:25:26 optilaptop-gentoo-acer /etc/init.d/net.wlan0[6456]: WARNING: net.wlan0 has started, but is inactive
Jun 19 00:25:31 optilaptop-gentoo-acer /etc/init.d/net.wlan0[6552]: WARNING: net.wlan0 has already started, but is inactive
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.099741] Registered led device: iwl-phy0::radio
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.099775] Registered led device: iwl-phy0::assoc
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.099806] Registered led device: iwl-phy0::RX
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.099837] Registered led device: iwl-phy0::TX
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.104975] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.234336] Registered led device: iwl-phy0::radio
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.234356] Registered led device: iwl-phy0::assoc
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.234375] Registered led device: iwl-phy0::RX
Jun 19 00:25:35 optilaptop-gentoo-acer [ 166.234394] Registered led device: iwl-phy0::TX
Jun 19 00:25:35 optilaptop-gentoo-acer /etc/init.d/net.wlan0[6554]: WARNING: net.wlan0 has started, but is inactive
Jun 19 00:26:02 optilaptop-gentoo-acer [ 193.379727] wlan0: deauthenticating by local choice (reason=3)
Jun 19 00:26:08 optilaptop-gentoo-acer [ 199.549753] ATL1E 0000:05:00.0: irq 31 for MSI/MSI-X
Jun 19 00:26:08 optilaptop-gentoo-acer [ 199.549925] ATL1E 0000:05:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
Jun 19 00:26:09 optilaptop-gentoo-acer /etc/init.d/net.eth0[7022]: No configuration specified; defaulting to DHCP
Jun 19 00:26:09 optilaptop-gentoo-acer dhcpcd[7028]: eth0: dhcpcd 4.0.13 starting
Jun 19 00:26:09 optilaptop-gentoo-acer dhcpcd[7028]: eth0: broadcasting for a lease
Jun 19 00:26:09 optilaptop-gentoo-acer dhcpcd[7028]: eth0: offered 192.168.0.2 from 192.168.0.1
Jun 19 00:26:09 optilaptop-gentoo-acer dhcpcd[7028]: eth0: acknowledged 192.168.0.2 from 192.168.0.1
Jun 19 00:26:09 optilaptop-gentoo-acer dhcpcd[7028]: eth0: checking 192.168.0.2 is available on attached networks
Jun 19 00:26:13 optilaptop-gentoo-acer dhcpcd[7028]: eth0: leased 192.168.0.2 for 259200 seconds
Jun 19 00:26:15 optilaptop-gentoo-acer [ 205.793553] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
Jun 19 00:26:19 optilaptop-gentoo-acer [ 210.171009] eth0: no IPv6 routers present
Jun 19 00:26:27 optilaptop-gentoo-acer su[6360]: pam_unix(su:session): session closed for user root
Jun 19 00:26:43 optilaptop-gentoo-acer su[7108]: Successful su for root by luca
Jun 19 00:26:43 optilaptop-gentoo-acer su[7108]: + /dev/pts/0 luca:root
Jun 19 00:26:43 optilaptop-gentoo-acer su[7108]: pam_unix(su:session): session opened for user root by luca(uid=1000)
Jun 19 00:26:58 optilaptop-gentoo-acer su[7129]: Successful su for root by luca
Jun 19 00:26:58 optilaptop-gentoo-acer su[7129]: + /dev/pts/3 luca:root
Jun 19 00:26:58 optilaptop-gentoo-acer su[7129]: pam_unix(su:session): session opened for user root by (uid=1000)
Jun 19 00:26:58 optilaptop-gentoo-acer su[7129]: pam_unix(su:session): session closed for user root
Jun 19 00:26:58 optilaptop-gentoo-acer su[7134]: Successful su for root by luca
Jun 19 00:26:58 optilaptop-gentoo-acer su[7134]: + /dev/pts/3 luca:root
Jun 19 00:26:58 optilaptop-gentoo-acer su[7134]: pam_unix(su:session): session opened for user root by (uid=1000)
Jun 19 00:26:58 optilaptop-gentoo-acer su[7134]: pam_unix(su:session): session closed for user root
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.954120] usb usb7: usb resume
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.954128] usb usb7: wakeup_rh
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986127] hub 7-0:1.0: hub_resume
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986158] uhci_hcd 0000:00:1d.2: port 2 portsc 01a5,01
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986164] hub 7-0:1.0: port 2: status 0303 change 0004
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986204] hub 7-0:1.0: state 7 ports 2 chg 0004 evt 0000
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986218] uhci_hcd 0000:00:1d.2: port 2 portsc 01a5,01
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986228] usb 7-2: usb wakeup-resume
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.986239] usb 7-2: finish resume
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.997161] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.997173] hub 7-0:1.0: resume on port 2, status 0
Jun 19 00:27:22 optilaptop-gentoo-acer [ 272.997179] hub 7-0:1.0: port 2, status 0303, change 0004, 1.5 Mb/s
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.593158] usb 7-2: uhci_result_common: failed with status 440000
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.593177] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.606125] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.625152] usb 7-2: uhci_result_common: failed with status 440000
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.625170] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.651160] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.673224] usb 7-2: uhci_result_common: failed with status 440000
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.673241] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704087] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704106] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704123] hub 7-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704129] usb 7-2: USB disconnect, address 2
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704132] usb 7-2: unregistering device
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704137] usb 7-2: usb_disable_device nuking all URBs
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.704146] usb 7-2: unregistering interface 7-2:1.0
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.711722] usb 7-2:1.0: uevent
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.711985] usb 7-2: uevent
Jun 19 00:27:23 optilaptop-gentoo-acer [ 273.816168] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
Jun 19 00:27:24 optilaptop-gentoo-acer [ 274.954045] usb usb7: suspend_rh (auto-stop)
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.115217] usb usb2: usb resume
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.115226] ehci_hcd 0000:00:1d.7: resume root hub
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.145123] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.204053] usb usb7: wakeup_rh (auto-start)
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.204091] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.204109] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.204122] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.236129] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.247141] hub 2-0:1.0: hub_resume
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.308145] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
Jun 19 00:27:24 optilaptop-gentoo-acer [ 275.410167] usb 7-2: new low speed USB device using uhci_hcd and address 3
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.588125] usb 7-2: skipped 1 descriptor after interface
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.595212] usb 7-2: default language 0x0409
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641201] usb 7-2: New USB device found, idVendor=04ca, idProduct=0030
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641208] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641214] usb 7-2: Product: USB Mouse
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641217] usb 7-2: Manufacturer: Lite-On Technology Corp.
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641333] usb 7-2: uevent
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641367] usb 7-2: usb_probe_device
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.641386] usb 7-2: configuration #1 chosen from 1 choice
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.646112] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.646178] usb 7-2:1.0: uevent
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.646229] usbhid 7-2:1.0: usb_probe_interface
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.646234] usbhid 7-2:1.0: usb_probe_interface - got id
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.680597] input: Lite-On Technology Corp. USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.680702] generic-usb 0003:04CA:0030.0002: input,hidraw0: USB HID v1.10 Mouse [Lite-On Technology Corp. USB Mouse] on usb-0000:00:1d.2-2/input0
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.680754] drivers/usb/core/inode.c: creating file '003'
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.680807] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.680820] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.685720] usb 7-2:1.0: uevent
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.685830] usb 7-2: uevent
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.719168] uhci_hcd 0000:00:1d.2: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.753510] usb 7-2:1.0: uevent
Jun 19 00:27:25 optilaptop-gentoo-acer [ 275.753613] usb 7-2: uevent
Jun 19 00:27:27 optilaptop-gentoo-acer [ 277.701187] hub 2-0:1.0: hub_suspend
Jun 19 00:27:27 optilaptop-gentoo-acer [ 277.701200] usb usb2: bus auto-suspend
Jun 19 00:27:27 optilaptop-gentoo-acer [ 277.701204] ehci_hcd 0000:00:1d.7: suspend root hub[/code]

/var/log/Xorg.0.log

[honp]

Could this help?
http://www.go2linux.org/ERROR-dbus-proxies-Introspect-error-exception-org-freedesktop-wicd

[optiluca]

[baaann]

You could try re-emerging wicd's dependencies, in particular I would try dev-python/dbus-python

[optiluca]

[honp]

I am just installing wicd, it looks very interesting and i have to thank you that you point me to it:)

[honp]

So, installed and it looks great. Yes it works in my notebook and /etc/dbus-1/system.d/wicd.conf is the same as you post in your post:)

And have you got dbus started?

[honp]

So i tested it a bit and one more advice i can provide:) is start wicd by hand, not using init script.
/usr/sbin/wicd -f -e -o (as root)
and then try the client.

[optiluca]

[honp]

Hi, i am glad that it works for you:)

Maybe you should start next thread with the mouse and resume problem and check that CONFIG_USB_SUSPEND is in your kernel, maybe it could be your problem.