| View previous topic :: View next topic |
| Author |
Message |
magowiz
Veteran
Joined: 17 Feb 2005
Posts: 1029
Location: Italy/Milan/Bresso
|
 Posted: Thu Jul 02, 2009 3:46 pm Post subject: Toshiba Skype USB Voip Phone |
 |
|
Hi,
I've got a voip phone by Toshiba, and I'm able to use it as an external usb sound card but I would like to use also the buttons on it if it is possible.
when I connect it /var/log/messages says:
| Code: | Jul 2 17:37:42 athlon [ 1972.441781] usb usb1: usb resume
Jul 2 17:37:42 athlon [ 1972.441786] ehci_hcd 0000:00:02.1: resume root hub
Jul 2 17:37:42 athlon [ 1972.562283] ehci_hcd 0000:00:02.1: port 5 full speed --> companion
Jul 2 17:37:42 athlon [ 1972.562289] ehci_hcd 0000:00:02.1: GetStatus port 5 status 003001 POWER OWNER sig=se0 CONNECT
Jul 2 17:37:42 athlon [ 1972.573287] hub 1-0:1.0: hub_resume
Jul 2 17:37:42 athlon [ 1972.573316] usb usb2: usb resume
Jul 2 17:37:42 athlon [ 1972.573323] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
Jul 2 17:37:42 athlon [ 1972.579284] ohci_hcd 0000:00:02.0: wakeup root hub
Jul 2 17:37:42 athlon [ 1972.639284] hub 2-0:1.0: hub_resume
Jul 2 17:37:42 athlon [ 1972.639304] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
Jul 2 17:37:42 athlon [ 1972.639307] hub 2-0:1.0: port 5: status 0101 change 0001
Jul 2 17:37:42 athlon [ 1972.740291] hub 2-0:1.0: state 7 ports 8 chg 0020 evt 0000
Jul 2 17:37:42 athlon [ 1972.740306] hub 2-0:1.0: port 5, status 0101, change 0000, 12 Mb/s
Jul 2 17:37:42 athlon [ 1972.846290] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
Jul 2 17:37:42 athlon [ 1972.897292] usb 2-5: new full speed USB device using ohci_hcd and address 5
Jul 2 17:37:42 athlon [ 1973.005289] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
Jul 2 17:37:42 athlon [ 1973.079313] usb 2-5: skipped 16 descriptors after interface
Jul 2 17:37:42 athlon [ 1973.079317] usb 2-5: skipped 2 descriptors after interface
Jul 2 17:37:42 athlon [ 1973.079319] usb 2-5: skipped 1 descriptor after endpoint
Jul 2 17:37:42 athlon [ 1973.079321] usb 2-5: skipped 2 descriptors after interface
Jul 2 17:37:42 athlon [ 1973.079323] usb 2-5: skipped 1 descriptor after endpoint
Jul 2 17:37:42 athlon [ 1973.079325] usb 2-5: skipped 1 descriptor after interface
Jul 2 17:37:42 athlon [ 1973.082310] usb 2-5: default language 0x0409
Jul 2 17:37:42 athlon [ 1973.088312] usb 2-5: New USB device found, idVendor=0c45, idProduct=184c
Jul 2 17:37:42 athlon [ 1973.088316] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Jul 2 17:37:42 athlon [ 1973.088318] usb 2-5: Product: USB Audio Device
Jul 2 17:37:42 athlon [ 1973.088320] usb 2-5: Manufacturer: GENERIC
Jul 2 17:37:42 athlon [ 1973.088390] usb 2-5: uevent
Jul 2 17:37:42 athlon [ 1973.088410] usb 2-5: usb_probe_device
Jul 2 17:37:42 athlon [ 1973.088413] usb 2-5: configuration #1 chosen from 1 choice
Jul 2 17:37:42 athlon [ 1973.091312] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
Jul 2 17:37:42 athlon [ 1973.091353] usb 2-5:1.0: uevent
Jul 2 17:37:42 athlon [ 1973.091396] snd-usb-audio 2-5:1.0: usb_probe_interface
Jul 2 17:37:42 athlon [ 1973.091399] snd-usb-audio 2-5:1.0: usb_probe_interface - got id
Jul 2 17:37:43 athlon [ 1973.472395] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
Jul 2 17:37:43 athlon [ 1973.472418] usb 2-5:1.1: uevent
Jul 2 17:37:43 athlon [ 1973.472431] usb 2-5: adding 2-5:1.2 (config #1, interface 2)
Jul 2 17:37:43 athlon [ 1973.472445] usb 2-5:1.2: uevent
Jul 2 17:37:43 athlon [ 1973.472454] usb 2-5: adding 2-5:1.3 (config #1, interface 3)
Jul 2 17:37:43 athlon [ 1973.472472] usb 2-5:1.3: uevent
Jul 2 17:37:43 athlon [ 1973.472493] usbhid 2-5:1.3: usb_probe_interface
Jul 2 17:37:43 athlon [ 1973.472495] usbhid 2-5:1.3: usb_probe_interface - got id
Jul 2 17:37:43 athlon [ 1973.517400] input: GENERIC USB Audio Device as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.3/input/input8
Jul 2 17:37:43 athlon [ 1973.524381] generic-usb 0003:0C45:184C.0004: input,hidraw0: USB HID v1.00 Device [GENERIC USB Audio Device] on usb-0000:00:02.0-5/input3
Jul 2 17:37:43 athlon [ 1973.524423] drivers/usb/core/inode.c: creating file '005'
Jul 2 17:37:43 athlon [ 1973.524470] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0020
Jul 2 17:37:43 athlon [ 1973.528092] usb 2-5:1.3: uevent
Jul 2 17:37:43 athlon [ 1973.528200] usb 2-5: uevent
Jul 2 17:37:44 athlon [ 1974.701271] hub 1-0:1.0: hub_suspend
Jul 2 17:37:44 athlon [ 1974.701279] usb usb1: bus auto-suspend
Jul 2 17:37:44 athlon [ 1974.701282] ehci_hcd 0000:00:02.1: suspend root hub
|
lsusb
| Code: | Bus 002 Device 005: ID 0c45:184c Microdia VoIP Phone
|
dmesg
| Code: | [ 2342.161425] usb usb1: usb resume
[ 2342.161430] ehci_hcd 0000:00:02.1: resume root hub
[ 2342.282280] ehci_hcd 0000:00:02.1: port 5 full speed --> companion
[ 2342.282294] ehci_hcd 0000:00:02.1: GetStatus port 5 status 003001 POWER OWNER sig=se0 CONNECT
[ 2342.293042] hub 1-0:1.0: hub_resume
[ 2342.293094] usb usb2: usb resume
[ 2342.293106] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 2342.299026] ohci_hcd 0000:00:02.0: wakeup root hub
[ 2342.359024] hub 2-0:1.0: hub_resume
[ 2342.359053] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
[ 2342.359061] hub 2-0:1.0: port 5: status 0101 change 0001
[ 2342.460054] hub 2-0:1.0: state 7 ports 8 chg 0020 evt 0000
[ 2342.460076] hub 2-0:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 2342.566054] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
[ 2342.617292] usb 2-5: new full speed USB device using ohci_hcd and address 7
[ 2342.725023] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
[ 2342.796275] usb 2-5: skipped 16 descriptors after interface
[ 2342.796279] usb 2-5: skipped 2 descriptors after interface
[ 2342.796281] usb 2-5: skipped 1 descriptor after endpoint
[ 2342.796283] usb 2-5: skipped 2 descriptors after interface
[ 2342.796285] usb 2-5: skipped 1 descriptor after endpoint
[ 2342.796286] usb 2-5: skipped 1 descriptor after interface
[ 2342.799274] usb 2-5: default language 0x0409
[ 2342.805271] usb 2-5: New USB device found, idVendor=0c45, idProduct=184c
[ 2342.805273] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2342.805276] usb 2-5: Product: USB Audio Device
[ 2342.805277] usb 2-5: Manufacturer: GENERIC
[ 2342.805345] usb 2-5: uevent
[ 2342.806860] usb 2-5: usb_probe_device
[ 2342.806865] usb 2-5: configuration #1 chosen from 1 choice
[ 2342.808306] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
[ 2342.808370] usb 2-5:1.0: uevent
[ 2342.808443] snd-usb-audio 2-5:1.0: usb_probe_interface
[ 2342.808452] snd-usb-audio 2-5:1.0: usb_probe_interface - got id
[ 2343.228638] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
[ 2343.228658] usb 2-5:1.1: uevent
[ 2343.228669] usb 2-5: adding 2-5:1.2 (config #1, interface 2)
[ 2343.228685] usb 2-5:1.2: uevent
[ 2343.228695] usb 2-5: adding 2-5:1.3 (config #1, interface 3)
[ 2343.228708] usb 2-5:1.3: uevent
[ 2343.228727] usbhid 2-5:1.3: usb_probe_interface
[ 2343.228729] usbhid 2-5:1.3: usb_probe_interface - got id
[ 2343.237367] input: GENERIC USB Audio Device as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.3/input/input10
[ 2343.245350] generic-usb 0003:0C45:184C.0006: input,hidraw0: USB HID v1.00 Device [GENERIC USB Audio Device] on usb-0000:00:02.0-5/input3
[ 2343.245393] drivers/usb/core/inode.c: creating file '007'
[ 2343.245441] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0020
[ 2343.247288] usb 2-5:1.3: uevent
[ 2343.247402] usb 2-5: uevent
[ 2344.701027] hub 1-0:1.0: hub_suspend
[ 2344.701035] usb usb1: bus auto-suspend
[ 2344.701037] ehci_hcd 0000:00:02.1: suspend root hub
|
If I plug the device I can hear on it the gnome login sound.
Any chance to get it working?
Tell me if you need further information.
EDIT : on the back of the phone is written PX1214E-2UPH that seems to be the model name. |
|
| Back to top |
|
 |
poly_poly-man
Advocate
Joined: 06 Dec 2006
Posts: 2477
Location: RIT, NY, US
|
| Posted: Fri Jul 03, 2009 5:41 am Post subject: |
|
|
the buttons are showing up as HID - this means they're either closer to a joystick or a keyboard - probably keyboard. Get the input to X and then remap the keys. See if xev shows the buttons as working automatically first.
_________________
iVBORw0KGgoAAAANSUhEUgAAA
avatar: new version of logo - see topic 838248. Potentially still a WiP. |
|
| Back to top |
|
|
magowiz
Veteran
Joined: 17 Feb 2005
Posts: 1029
Location: Italy/Milan/Bresso
|
| Posted: Fri Jul 03, 2009 9:22 am Post subject: |
|
|
| poly_poly-man wrote: | | the buttons are showing up as HID - this means they're either closer to a joystick or a keyboard - probably keyboard. Get the input to X and then remap the keys. See if xev shows the buttons as working automatically first. |
xev doesn't seems to react to any button pressed on the phone... |
|
| Back to top |
|
|
poly_poly-man
Advocate
Joined: 06 Dec 2006
Posts: 2477
Location: RIT, NY, US
|
| Posted: Fri Jul 03, 2009 2:38 pm Post subject: |
|
|
need your xorg.conf then.... I imagine you are not using evdev?
_________________
iVBORw0KGgoAAAANSUhEUgAAA
avatar: new version of logo - see topic 838248. Potentially still a WiP. |
|
| Back to top |
|
|
magowiz
Veteran
Joined: 17 Feb 2005
Posts: 1029
Location: Italy/Milan/Bresso
|
| Posted: Fri Jul 03, 2009 5:02 pm Post subject: |
|
|
| poly_poly-man wrote: | | need your xorg.conf then.... I imagine you are not using evdev? |
the problem seems to be that my udev doesn't assign a device file under /dev/ to the hidraw device that is my phone buttons .
EDIT : I was wrong the device is hidraw0
Anyway my xorg.conf is :
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"asier for Skype users with the dial key sequence provided. Although meant for Windows users in the first place, the rapid proliferation of Skype users made it via
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "wfb"
Load "record"
Load "dbe"
Load "GLcore"
Load "xtrap"
Load "extmod"
Load "glx"
Load "freetype"
Load "type1"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "it"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer X223W"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 6100 nForce 430"
BusID "PCI:0:13:0"
Option "AddARGBGLXVisuals" "true"
Option "NoLogo" "false"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6150SE nForce 430"
Option "NoLogo" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1680x1050_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
