| View previous topic :: View next topic |
| Author |
Message |
outkay
n00b
Joined: 11 Aug 2009
Posts: 7
|
 Posted: Tue Aug 11, 2009 10:54 pm Post subject: Compiz fusion znikają obramowania |
 |
|
Witam!
Zainstalowałem compiz fusion, jednak gdy włączam go poleceniem compiz --replace, to usuwają się belki okien (obramowania) a w konsoli zazwyczaj wypluwa:
| Code: | compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
|
Z opcją --debug dodatkowo:
| Code: | compiz (core) - Debug: Could not stat() file /home/xca/.compiz/plugins/libcore.so : No such file or directory
compiz (core) - Debug: Could not stat() file /usr/lib/compiz/libcore.so : No such file or directory |
Mam emeralda. Gdy odpalam go poleceniem emerald --replace to nic się nie dzieje chodźbym czekal niewiadomo ile.
Oto mój xorg.conf:
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 310 # mm
Identifier "Monitor0"
VendorName "ENC"
ModelName "M1900"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV280 [Radeon 9200 PRO]"
BusID "PCI:1:0:0"
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "True"
Option "AllowGLXWithComposite" "True"
Option "backingstore" "True"
Option "TripleBuffer" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "TripleBuffer" "true"
Option "no GLXFBConfig for depth 32"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
Mam kartę graficzną ati radeon 9250. Direct rendering: On.
Proszę o pomoc tutaj lub na gg (gg:7XXXXX)
Z Góry bardzo dziękuję!!!!!!!!
--- Edytowane przez moderatora.
Jeśli prosisz o pomoc na forum to może Ci zostać ona udzielona tylko na nim. Jeśli chcesz takie sprawy załatwiać prywatnie na gg to nie pisz na forum.
Kurt Steiner |
|
| Back to top |
|
 |
c0oba
Tux's lil' helper
Joined: 19 Jan 2007
Posts: 111
Location: wawa
|
| Posted: Wed Aug 12, 2009 1:20 pm Post subject: |
|
|
A galaretowatość i inne bajery nie związane z obramowaniem działają?
Spróbuj odpalić compiza poprzez compiz-manager. |
|
| Back to top |
|
|
outkay
n00b
Joined: 11 Aug 2009
Posts: 7
|
| Posted: Wed Aug 12, 2009 5:18 pm Post subject: |
|
|
Przez compiz-manager inne bajery dzialaja przez compiz --replace nie.
Zdaje się, że nie ma obramowań dlatego, że włączenie emeralda nic nie robi.
Może tu leży problem? |
|
| Back to top |
|
|
lmmsci
Apprentice
Joined: 20 May 2006
Posts: 190
|
| Posted: Thu Aug 13, 2009 9:11 pm Post subject: |
|
|
| Sprawdź w ccsm, czy masz włączone w efektach dekoracje okien. |
|
| Back to top |
|
|
outkay
n00b
Joined: 11 Aug 2009
Posts: 7
|
| Posted: Fri Aug 14, 2009 11:08 am Post subject: |
|
|
| Mam. |
|
| Back to top |
|
|
lmmsci
Apprentice
Joined: 20 May 2006
Posts: 190
|
| Posted: Fri Aug 14, 2009 1:30 pm Post subject: |
|
|
Uruchamianie compiza z linii poleceń jest dość skomplikowane, np:
| Code: | | compiz --replace ccp --sm-disable --ignore-desktop-hints --indirect-rendering & |
Nie pamiętam już wszystkiego. Dlatego właśnie albo używam fusion-icon albo compiz-manager, albo... KDE 
Myślę że to ccp jest tym minimum, które powinno się pojawić po --replace:
| Code: | | compiz --replace ccp & |
|
|
| Back to top |
|
|
outkay
n00b
Joined: 11 Aug 2009
Posts: 7
|
| Posted: Sat Aug 15, 2009 1:30 pm Post subject: |
|
|
Ale to nie naprawia mojej sytuacji : (
Uruchamiany z fusion-icon 'robi' to samo. |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sat Aug 15, 2009 1:41 pm Post subject: |
|
|
moze po uruchomieniu compiza uruchomisz jakiegos menadzera okien, np emeralda? :> A jezeli ten nie dziala to uzyj innego...
Uruchom fusion-icon i z jego poziomu mozesz sie przelaczac....
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
outkay
n00b
Joined: 11 Aug 2009
Posts: 7
|
| Posted: Sun Aug 16, 2009 10:04 am Post subject: |
|
|
| Menadzer okien to compiz. Chyba chodzi Ci o dekoratora okien. A żaden dekorator okien mi nie odpala (pisze starting i tyle). |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
|
| Back to top |
|
|
soban_
l33t
Joined: 27 Aug 2008
Posts: 668
Location: /home/soban
|
| Posted: Thu Sep 17, 2009 12:57 pm Post subject: |
|
|
Prawym na ikonke fusion-icon select windows decorate -> GTK w compiz options -> (odznaczam wszystko). Potem wchodze w Settings Manager i zaznaczam dekoracje okien + te pierdoly ktore chce miec. Wtedy pokazuja sie belki okien, gdy to zrobisz jak nie zatrybi to zrob jeszcze Reload Windows Manager. Napewno zatrybi, jak nie to sprobuj powlaczac inne efekty az w koncu zadziala.
_________________
gg: 525600 |
|
| Back to top |
|
|
|
Polskie forum (Polish)
