| View previous topic :: View next topic |
| Author |
Message |
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
 Posted: Thu Feb 12, 2004 11:47 am Post subject: Re: random lockups |
 |
|
| pestilence wrote: | | P.S _kev_ Can you confirm if during Lock ups your cpu fan starts to spin? as that the system load rized?[/b] |
I had this once -- total lock, can't switch to other consoles and CPU fan starts to spin. Pressing the "power" button (configured to start "poweroff") powers off safely.
I have problems with the startuptime of X apps. It takes ages to load an app (nearly a minute for a KDE Konsole, log onto KDE ages, logoff ages... it isn't a KDE issue, blackbox w/xdm is the same). Once the app is up, I can use it without any problems. I thought the XFree-r4 solved the porblem, but it didn't  . I *had* a working Xserver with fast response, but only seldom and I can't reproduce the steps to get to it...
I have found out the following: if the launch time is fast, my fonts look good -- a working xfs. If the fonts are ugly, launch times take ages again. I started X without the xfs, but that didn't help. Anyone experiencing the same problems? |
|
| Back to top |
|
 |
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 11:49 am Post subject: |
|
|
| pestilence wrote: | Are you running a 2.6.x kernel? And if you are running are you receiving the following warnings in your message log:
| Code: |
Feb 12 11:58:41 pestilence Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
Feb 12 11:58:41 pestilence in_atomic():1, irqs_disabled():0
Feb 12 11:58:41 pestilence Call Trace:
Feb 12 11:58:41 pestilence [<c011f70e>] __might_sleep+0x9e/0xd0
Feb 12 11:58:41 pestilence [<e1a5d15b>] __ke_down_struct_sem+0x1b/0x30 [fglrx]
Feb 12 11:58:41 pestilence [<e1a6bee4>] drm_find_file+0x30/0x6e [fglrx]
Feb 12 11:58:41 pestilence [<e1a6c1e3>] drm_getmagic+0xb9/0x14b [fglrx]
Feb 12 11:58:41 pestilence [<e1a6c12a>] drm_getmagic+0x0/0x14b [fglrx]
Feb 12 11:58:41 pestilence [<e1a5fbef>] firegl_ioctl+0x167/0x1a2 [fglrx]
Feb 12 11:58:41 pestilence [<c014262c>] kmem_cache_alloc+0x4c/0x50
Feb 12 11:58:41 pestilence [<c016765a>] sys_ioctl+0xea/0x270
Feb 12 11:58:41 pestilence [<c03f2cd7>] syscall_call+0x7/0xb
|
Before you ask  yes i have mtrr enabled in the kernel |
I get the same errors. Check out Wedge_ in the ATI Radeon FAQ, he says it#s nothing to worry about...
https://forums.gentoo.org/viewtopic.php?t=54793&start=1414 |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 11:52 am Post subject: |
|
|
| pestilence wrote: | Here is also the Changelog of the 3.7.0 version of the drivers:
| Code: |
Fixed in 3.7.0 release:
Fixed Crash with Savage from S2Games
Red Hat Enterprise Linux 3 (IA32) 3.0 support
Improved Full Screen Anti Aliasing Support (FSAA)
Added support for the following graphics cards:
MOBILITY FireGL T2 support
|
|
Hm, can anyone tell me what kind of Chipset the Radeon Mobility 9000 used with the Acer has? |
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 12:07 pm Post subject: |
|
|
I am pretty sure I use the fgrlx driver and 2.6.1 kernel.
| Code: |
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
Load "synaptics"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
ModelName "1400x1050@60Hz"
HorizSync 27-90
DisplaySize 320 240
VertRefresh 40-60
Option "DPMS" "true"
Option "CalcAlgoritmn" "CheckDeskopGeometry"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "PAL-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "on"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "6"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1400x1050 1024x768 640x480"
# ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1400 1050
EndSubsection
Subsection "Display"
Depth 16
Modes "1400x1050 1024x768"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "USBMouse" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
|
This is a copy of my log (would be very happy if somebody could tell me why my touchpad is unknown  )
Edit:had to spit the post in 2 so there where room for the log. Sorry for all the "spam" just didnt want to leave out any info since I am not sure witch is important and witch is not |
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 12:10 pm Post subject: |
|
|
This is my log
| Code: |
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.1-gentoo i686 [ELF]
Build Date: 10 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 12 09:05:35 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "USBMouse"
(**) |-->Input Device "SynapticsTouchpad"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "dk"
(**) XKB: layout: "dk"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80022040, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1025,001f rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1025,001f rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1025,001f rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1025,001f rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1025,001f rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1025,001f rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1025,001f rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1025,001f rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1025,001f rev 03 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c66 card 1025,001f rev 01 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 14e4,4401 card 1025,001f rev 01 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 8086,1043 card 8086,2527 rev 04 class 02,80,00 hdr 00
(II) PCI: 02:06:0: chip 1217,7114 card 4401,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1217,7114 card 4801,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1217,7110 card 1025,001f rev 00 class 08,80,00 hdr 00
(II) PCI: 02:07:0: chip 104c,8026 card 1025,001f rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd05fffff (0x400000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xd0300000 - 0xd03fffff (0x100000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:6:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] rev 1, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[1] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[2] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[3] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[4] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[5] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[6] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[1] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[2] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[3] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[4] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[5] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[6] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[7] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[6] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[7] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[8] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[9] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/drivers/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 3.2.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/drivers/synaptics_drv.o
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI RV250 Lf (M9) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[6] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[7] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[8] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[9] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x0820b120
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[6] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[7] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[8] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[9] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[10] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[11] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[12] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[15] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[23] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[26] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[27] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000800"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000100"
(**) fglrx(0): Option "MonitorLayout" "AUTO, NONE"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "6"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "PAL-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "on"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI RV250 Lf (M9)" (Chipset = 0x4c66)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x001f)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xd0100000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type NONE
(II) fglrx(0): Primary head:
Monitor -- LVDS
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: HTC
(II) fglrx(0): Panel Size from BIOS: 1400x1050
(**) fglrx(0): PseudoColor visuals enabled
(**) fglrx(0): Pseudo Color Vsuals enabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=20000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1400x1050 1024x768 640x480
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050 1024x768 640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050 1024x768 640x480" 108.00 1400 1448 1560 1688 1050 1051 1054 1066
(**) fglrx(0): Display dimensions: (320, 240) mm
(**) fglrx(0): DPI set to (111, 111)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): FSAAScale=1
(**) fglrx(0): FSAA Gamma 141098811
(**) fglrx(0): FSAA Multisample Position is 141100683
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 3.2.8
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000800
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000255
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0100000 - 0xd010ffff (0x10000) MX[B]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd0200000 - 0xd0203fff (0x4000) MX[B]
[8] -1 0 0xd0209000 - 0xd02097ff (0x800) MX[B]
[9] -1 0 0xd0208000 - 0xd0208fff (0x1000) MX[B]
[10] -1 0 0xd0206000 - 0xd0206fff (0x1000) MX[B]
[11] -1 0 0xd0204000 - 0xd0205fff (0x2000) MX[B]
[12] -1 0 0xd0000800 - 0xd00008ff (0x100) MX[B]
[13] -1 0 0xd0000c00 - 0xd0000dff (0x200) MX[B]
[14] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[15] -1 0 0xd0000000 - 0xd00003ff (0x400) MX[B]
[16] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[17] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[18] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[26] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[27] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[28] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[30] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[34] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(II) fglrx(0): UMM area: 0xd87ac000 (size=0x03854000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module "agpgart"
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf9997000
(II) fglrx(0): [drm] mapped SAREA 0xf9997000 to 0x4022d000
(II) fglrx(0): [drm] framebuffer handle = 0xd8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 3.2.8
(II) fglrx(0): Date: Sep 21 2003
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.1-gentoo
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xd0100000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
(II) fglrx(0): [agp] AGP disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] grafics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xfde4c000
(II) fglrx(0): VisualConfigs initialized
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): front overlay: 0xd8d58000
(II) fglrx(0): back overlay: 0xd8ee4000
(II) fglrx(0): video overlay: 0xd9070000
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x007ac000
(II) fglrx(0): Splitting WC range: base: 0xd8000000, size: 0x7ac000
(II) fglrx(0): Splitting WC range: base: 0xd8400000, size: 0x3ac000
(II) fglrx(0): Splitting WC range: base: 0xd8600000, size: 0x1ac000
(II) fglrx(0): Splitting WC range: base: 0xd8700000, size: 0xac000
(II) fglrx(0): Splitting WC range: base: 0xd8780000, size: 0x2c000
(II) fglrx(0): Splitting WC range: base: 0xd87a0000, size: 0xc000
(==) fglrx(0): Write-combining range (0xd87a8000,0x4000)
(==) fglrx(0): Write-combining range (0xd87a0000,0xc000)
(==) fglrx(0): Write-combining range (0xd8780000,0x2c000)
(==) fglrx(0): Write-combining range (0xd8700000,0xac000)
(==) fglrx(0): Write-combining range (0xd8600000,0x1ac000)
(==) fglrx(0): Write-combining range (0xd8400000,0x3ac000)
(==) fglrx(0): Write-combining range (0xd8000000,0x7ac000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1428)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1056)
(II) fglrx(0): Largest offscreen area available: 1408 x 364
(**) Option "dpms" "true"
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "CalcAlgoritmn" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Lines
Dashed Lines
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) USBMouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) USBMouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) USBMouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) USBMouse: ZAxisMapping: buttons 4 and 5
(**) USBMouse: Buttons: 5
(II) Synaptics touchpad driver version 0.12.4
SynapticsTouchpad no synaptics event device found
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
Query no Synaptics: 6003C8
(EE) SynapticsTouchpad no synaptics touchpad detected and no repeater device
(EE) SynapticsTouchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynapticsTouchpad"
(II) UnloadModule: "synaptics"
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "USBMouse" (type: MOUSE)
(II) USBMouse: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1400 hbeg: 1448 hend: 1560 httl: 1688
vdsp: 1050 vbeg: 1051 vend: 1054 vttl: 1066 flags: -2147483648
(II) 3rd Button detected: disabling emulate3Button
|
|
|
| Back to top |
|
|
Radi
Tux's lil' helper
Joined: 09 Jul 2002
Posts: 108
|
| Posted: Thu Feb 12, 2004 12:17 pm Post subject: |
|
|
@webmarck:
can you use the touchpad basically, or isn't it responding on any input moving mouse etc. ?
Do you load the evdev modul?
There is no problem in your Xfree Log.
At First i had some problems with the tapping on the pad for clicking
Just look at my config, its working quite nice for me:
| Code: | Section "InputDevice"
Identifier "Mouse2"
Driver "synaptics"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/event0"
Option "ZAxisMapping" "4 5"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "150"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "UpDownScrolling" "on"
Option "CorePointer" ""
Option "EmulateMidButtonTime" "75"
EndSection
|
|
|
| Back to top |
|
|
Radi
Tux's lil' helper
Joined: 09 Jul 2002
Posts: 108
|
| Posted: Thu Feb 12, 2004 12:19 pm Post subject: |
|
|
Oh wait, damn, my browser search option does not find the Last EE's
Do you have activated the touchpad, try to make the touchpad activ by pressing <Fn>+<F7>.
Yes, that could be the problem. |
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 12:21 pm Post subject: |
|
|
I noticed this difference in your config file:
Option "MonitorLayout" "AUTO, NONE"
I am going to try this now...since i suffered another Hang up few minutes ago...let's see... |
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 12:28 pm Post subject: |
|
|
OK i changed the values with webmarcks config....
My first notice is that the fonts are totally different sizes from my previous desktop...gonna see now if i have any problems. |
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 1:15 pm Post subject: |
|
|
Sorry for the incomplet desciption of my problem.
My Touchpad DO work but I cant seem to get any of the "nice" stuff to work (doubletap).
I have jus tried to change my device to /dev/input/event0 but with out a change.
I have "manually" made
mknod /dev/input/event0 c 13 64
mknod /dev/input/event1 c 13 65
mknod /dev/input/event2 c 13 66
Dont know what they does and why but it says so in the README file (use version 0.12.4 of synaptics driver btw)
BUT looking at my kernel config I DONT have evdev module /sigh. I will recompile my kernel when i get home and see if it doesnt help . Thx for the help guys |
|
| Back to top |
|
|
Radi
Tux's lil' helper
Joined: 09 Jul 2002
Posts: 108
|
| Posted: Thu Feb 12, 2004 1:24 pm Post subject: |
|
|
since xfree-3.4.0-r3 ebuild emerge applies a extra synaptics patch, you don't need to install it manually anymore.
look, at my config i posted above, when you copy it into your XFConfig file it should work properly |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 1:37 pm Post subject: |
|
|
| webmarck wrote: | | BUT looking at my kernel config I DONT have evdev module /sigh. I will recompile my kernel when i get home and see if it doesnt help . Thx for the help guys |
If you compile it as a module, make sure to autoload it before you start X! |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 1:51 pm Post subject: |
|
|
| tuxlover wrote: | Hi,
After a while of usage I get really bad hard disk performance under 2.6.1 on my tm 800.
I played around with almost all the hdparm settings, but still, after some usage hdparm -t /dev/hda reports mostly between 5(!) and 8 mb/s. |
Argl! That's the reason my startup times are so slow! Lucky you with your 5MB/s. I get 500... KB/s!
Man, this is searious... Shutting down hdparm doesn't help at all, Using
| Code: | | -X66 -d1 -u1 -m16 -c3 |
puts the -t somewhere between 3 and 5 MB/s. As iwth tuxlover, my -T settings are just about OK at ~660MB/s.
Guys help me!  Friend of mine says: serve you right, that's an Hitatchi harddisk, there are the worst you can get for money... but that doesn't console me. Any tips? |
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 1:59 pm Post subject: |
|
|
| Code: |
root@pestilence pestilence # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 836 MB in 2.11 seconds = 396.27 MB/sec
Timing buffered disk reads: 54 MB in 3.41 seconds = 15.85 MB/sec
|
| Code: |
root@pestilence pestilence # cat /etc/conf.d/hdparm
# Copyright 2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License, v2 or later
# $Header: /home/cvsroot/gentoo-x86/sys-apps/hdparm/files/hdparm-conf.d,v 1.1 2003/03/01 21:17:39 sethbc Exp $
# Or, you can set hdparm options for ALL drives using all_args..
# eg.
# this mimics the behavior of the current script
disc0_args="-d1 -A1 -m16 -u1 -a64 -c3"
cdrom0_args="-d1"
|
I will also enable the flags to the cdrom...i was just afraid to enable them that there might be something wrong with them... |
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 2:10 pm Post subject: |
|
|
| Code: |
root@acer-laptop / # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 1404 MB in 2.00 seconds = 701.05 MB/sec
Timing buffered disk reads: 46 MB in 3.15 seconds = 14.62 MB/sec
|
| Code: |
nicolai@acer-laptop nicolai $ cat /etc/conf.d/hdparm
# Copyright 2003 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License, v2 or later
# $Header: /home/cvsroot/gentoo-x86/sys-apps/hdparm/files/hdparm-conf.d,v 1.1 2003/03/01 21:17:39 sethbc Exp $
# You can either set hdparm arguments for each drive using disc*_args and cdrom*_args..
# eg.
# disc0_args="-d1 -X66"
# disc1_args"-d1"
# cdrom0_args="-d1"
# Or, you can set hdparm options for ALL drives using all_args..
# eg.
# this mimics the behavior of the current script
all_args="-X udma5 -A1 -a1 -m16 -u1 -d1 -c3"
|
|
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 2:14 pm Post subject: |
|
|
I think i am starting to jump around...this post exhange has given more power to the Tuxtop  Woohoo!!! Thanks webmarck |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 2:19 pm Post subject: |
|
|
| pestilence wrote: | | Code: |
disc0_args="-d1 -A1 -m16 -u1 -a64 -c3"
cdrom0_args="-d1"
|
|
Hmm, even with yor settings I get
| Code: |
root@epikur root # hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 1300 MB in 2.00 seconds = 649.45 MB/sec
Timing buffered disk reads: 2 MB in 8.71 seconds = 235.06 kB/sec
|
That's even worse than before... |
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 2:23 pm Post subject: |
|
|
| Hmm my hdparm worked out of the box no needed to tweak anything..have you searched around the Net for something similar for your HD drive? |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 2:29 pm Post subject: |
|
|
Our harddrives should be the same
The fastest I can get is 700MB/3MB if I use:
| Code: | | -A1 -a1 -m16 -u1 -d0 -c3 |
note that I turned dma *off*... strange. But even if I use that configuration, my laptop becomes unusable due to long ap launch times. Administration is fine though... nano starts in seconds, compiling also isn't a problem. |
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 2:42 pm Post subject: |
|
|
I think ACER is big user of OEM stuff they can buy cheap
This is the hd in my laptop
| Code: |
root@acer-laptop nicolai # hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: IC25N040ATCS04-0
Serial Number: CSH409DLGXN58B
Firmware Revision: CA4OA71A
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 3
Supported: 5 4 3 2 & some of 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78140160
device size with M = 1024*1024: 38154 MBytes
device size with M = 1000*1000: 40007 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Device Configuration Overlay feature set
* SET MAX security extension
Address Offset Reserved Area Boot
Power-Up In Standby feature set
* Advanced Power Management feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
44min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
|
My is a 803LCi_bt (with no bluetoot btw) |
|
| Back to top |
|
|
pestilence
Apprentice
Joined: 05 Feb 2004
Posts: 213
Location: Athens / Greece
|
| Posted: Thu Feb 12, 2004 2:56 pm Post subject: |
|
|
Webmark i got the same HD..
root@pestilence pestilence # hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: IC25N040ATCS04-0
Serial Number: CSH405DCH72N5B
Firmware Revision: CA4OA71A
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 3
Supported: 5 4 3 2 & some of 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78140160
device size with M = 1024*1024: 38154 MBytes
device size with M = 1000*1000: 40007 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Device Configuration Overlay feature set
* SET MAX security extension
Address Offset Reserved Area Boot
Power-Up In Standby feature set
* Advanced Power Management feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
44min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct |
|
| Back to top |
|
|
safferli
n00b
Joined: 14 Jan 2004
Posts: 45
|
| Posted: Thu Feb 12, 2004 3:21 pm Post subject: |
|
|
Ah, we *do* have different harddisks! Just remembered that my 801 Acer has a 60G drive... I figured out what caused the slow app launch times: it's the missing /etc/dommainname file. Somehow, every app looks for it? Don't know why they should do that... Anyhow, I still get low hdparm tests, just as before. But at least my system now is usable. Here's my hdparm -I:
| Code: |
bash-2.05b# hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: HITACHI_DK23EA-60
Serial Number: PV9356
Firmware Revision: 00K2A0A1
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 3
Supported: 5 4 3 2 & some of 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117210240
device size with M = 1024*1024: 57231 MBytes
device size with M = 1000*1000: 60011 MBytes (60 GB)
Capabilities:
LBA, IORDY(cannot be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* SET MAX security extension
Address Offset Reserved Area Boot
* Advanced Power Management feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
54min for SECURITY ERASE UNIT. 54min for ENHANCED SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
|
|
|
| Back to top |
|
|
webmarck
n00b
Joined: 12 Feb 2004
Posts: 12
Location: Denmark
|
| Posted: Thu Feb 12, 2004 6:41 pm Post subject: |
|
|
| Recompiled the kernel WITH evdev module (did a full recompile since i needed to remove some stuff I didnt need) and now the touchpad works like a charm WEEE. One more problem less to think about. |
|
| Back to top |
|
|
Radi
Tux's lil' helper
Joined: 09 Jul 2002
Posts: 108
|
| Posted: Thu Feb 12, 2004 8:01 pm Post subject: |
|
|
| webmarck wrote: | | Recompiled the kernel WITH evdev module (did a full recompile since i needed to remove some stuff I didnt need) and now the touchpad works like a charm WEEE. One more problem less to think about. |
Hehe The right distro for the right notebook.
| Code: | ATA device, with non-removable media
Model Number: IC25N040ATMR04-0
Serial Number: MRG264K2DYHDPP
Firmware Revision: MO2OAD0A
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 78140160
LBA48 user addressable sectors: 78140160
device size with M = 1024*1024: 38154 MBytes
device size with M = 1000*1000: 40007 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
Automatic Acoustic Management feature set
* SET MAX security extension
Address Offset Reserved Area Boot
* SET FEATURES subcommand required to spinup after power up
Power-Up In Standby feature set
* Advanced Power Management feature set
* General Purpose Logging feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
34min for SECURITY ERASE UNIT.
HW reset results:
CBLID- below Vih
Device num = 0 determined by the jumper |
can someone tell me what this
| Code: | Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4 3 |
means?
Btw.: It seems theres not everywhere the same stuff in the same notebook. |
|
| Back to top |
|
|
federico
Advocate
Joined: 18 Feb 2003
Posts: 3272
Location: Italy, Milano
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
